Remote Lever

The Thomson Dropper Covert remote is one of the smallest and most ergonomic levers on the market today.
The lever works on the side of the handlebars and is shifter friendly.
Works with Covert and non-Covert cable actuated posts alike using a grub screw to firmly hold the cable in place.
Cable tension can be adjusted from the remote meaning removal of the post from the frame is not necessary to tension the cable.

31.8mm Drop Bar Clamp Conversion Kit

ReMote Drop Bar is the bar-end dropper post lever for drop bar bikes. As gravel bikes have taken off, more and more riders have discovered the joy of exploration while renewing their love for local and less-technical trails. And riders are finding that there are sections of trail that are just more fun with a lower center of gravity.

The low-profile ReMote Drop Bar stays out of the way of brake and shift levers during the bulk of riding but can be easily actuated by pushing down with the wrist or pulling up with ring and pinkie fingers. The wraparound base and expanding plug fit most carbon and aluminum road handlebars. Straightforward cable routing minimizes friction while Delrin bearings pivot smoothly and are easily serviced or replaced. Lever can be rotated to your preferred position at the end of the bar.

Compatibility

- Compatible with all cabled actuated droppers posts.
- Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post.
- Works with any drop bar handlebar
- Can be rotated to your preferred position.

Repair your ReMote or update worn-out elements with high-quality parts. We know that crashes happen so to save you from having to replace the whole Wolf Tooth ReMote we designed the inexpensive plastic axle to be the weakest part.
We sell adapter kits if you want to move your remote to a different cockpit or change brakes.

Wolf Tooth ReMote 360 is a joystick-style dropper lever that can be installed almost anywhere on the handlebars. It is compatible with all cable-actuated dropper posts. The lever can be pushed or pulled in any direction with a thumb or index finger. The clamp can be rotated 360º around the bars, while the base can be rotated 360º in relation to the clamp. It can be mounted on the left or right side, above or below the bars, and angled however feels comfortable. There is no wrong way to use ReMote 360.

The ReMote BarCentric™ is a dropper lever option for bikes with front shifters, lockout levers, or e-bike controls. The slender design of the ReMote BarCentric allows it to easily fit between the left grip and levers with four potential lever positioning options to avoid any interference with existing levers. This dropper lever has a ring shape that encompasses the handlebar, while also serving as a pivot point to provide the rider with extra leverage, making it easier to press the lever.

- Compatible with left side controls including 2x shifters, suspension lockout levers, and under-bar e-bike controls
- Large, smooth, sealed Enduro™ ball bearing that encircles the handlebar
- Clean and efficient cable routing flows around disc brake levers
- Adjustable reach for ideal ergonomics and controls clearance

Compatibility

- Compatible with all cabled actuated droppers posts
- Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post
- Works with any mountain bike handlebar
- Can be rotated to your preferred position
- Requires 15mm of space on handlebar
- Does not include cable and housing

Repair your ReMote or update worn-out elements with high-quality parts. We know that crashes happen so to save you from having to replace the whole Wolf Tooth ReMote we designed the inexpensive plastic axle to be the weakest part.
We sell adapter kits if you want to move your remote to a different cockpit or change brakes.

ReMote Cable Clamping Bolt M4x6mm

ReMote Drop Bar is a new dropper lever option for gravel bikes, drop bar mountain bikes, road bikes, and any other bike with drop bars. It can be actuated while riding on the hoods or in the drops thanks to refined ergonomics and a longer lever for easier access. Two 11mm diameter Enduro ball bearings are used at the pivot point for smooth actuation. This arrangement of bearings adds durability to the design, eliminates play, and allows for a smaller assembly compared to similar dropper levers. The machined clamp is positioned on the outside of the handlebars, which allows for the base to be closer to the bars, creating an assembly with a lower profile than competitors.

• Compatible with all cable-actuated dropper posts on bikes with drop bars
• Complete CNC-machined assembly
• Outboard clamp orientation does not interfere with hand placement
• Cable management pocket keeps cable end tucked away and out of sight
• Replacement parts available

INCLUDES
24mm clamp - standard drop bar diameter
Cable not included

Repair your ReMote or update worn-out elements with high-quality parts. We know that crashes happen so to save you from having to replace the whole Wolf Tooth ReMote we designed the inexpensive plastic axle to be the weakest part.
We sell adapter kits if you want to move your remote to a different cockpit or change brakes.

ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.

Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote dropper lever.
Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote leads in every category.

- UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration.
- Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation.
- Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.
- Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.
- Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters.
- Breakaway axle pivot: Crashes are bad- but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available here.
- High-traction lever: A machined surface ensures that control is not lost- even in the worst of conditions.
- Broad compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details.
- Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.

Compatibility

- Compatible with all cable actuated dropper posts.
- Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post.
- If your post is not listed in the charts below, measure the pivot center to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best.
- ReMote for Magura is compatible with the 2-bolt clamp SRAM brakes that do not feature Matchmaker X clamps.
- ReMote for Hope is only compatible Tech 3 brakes. There are two generations of Hope Tech 3 brakes. Our ReMote is designed to work with the early model of the Tech 3 brake levers. The newer model of the Tech 3 brakes has a threaded hole and will require some modifications to our ReMote base.

Repair your ReMote or update worn-out elements with high-quality parts. We know that crashes happen so to save you from having to replace the whole Wolf Tooth ReMote we designed the inexpensive plastic axle to be the weakest part.
We sell adapter kits if you want to move your remote to a different cockpit or change brakes.

Repair your ReMote or update worn-out elements with high-quality parts. We know that crashes happen so to save you from having to replace the whole Wolf Tooth ReMote we designed the inexpensive plastic axle to be the weakest part.
We sell adapter kits if you want to move your remote to a different cockpit or change brakes.

These are NOT compatible with the Wolf Tooth ReMote or Light Action ReMote only the Remote PRO