Brakes
-
Stock Code:PSBR-CA0900Stock Code:PSBR-CA0901
Problem Solvers Stainless Clamp-on Cable Guides Set/3 available in 25.4, 28.6 & 31.8mm diameters.
Our Clamp-on Cable Guides secure full housing on frames that don’t have cable stops or housing guides brazed on. Perfect for converting an older frame for use with larger diameter housing or for adding brakes to track frames.POAPOA -
Stock Code:PSBR-BR3341
Problem Solvers Cable Doubler 1:2 allows one lever to operate two brakes
Allows you to control two brakes with just one lever. Why? Well, there are myriad applications: cyclocross, fixies, tandems, bike polo, tricycles, recumbents, cycles for those with special needs, those four-person bikes you see on beach boulevards, and so on. You could even link them both together for ultimate redundancy!
- Machined and anodized aluminum tube with Teflon coating ensures low friction
- Setup requires three standard brake cables, two of which must be road cables$98.98 (RRP)POA -
Stock Code:PSBR-FS1169
PS Cantilever Stud 10x1mm Each.
Thread-in replacement studs for canti brake bosses.$8.95 (RRP)POA -
Stock Code:PSBR-BR0381
Problem Solvers Centerlock Adaptor for 6-bolt Rotors with Lockring
POA -
Stock Code:PSBR-BR5455Stock Code:PSBR-BR5456
Problem Solvers Backstop Frame-mounted clamp-on housing stop. For use when installing internal hubs or linear pull brakes on frames lacking necessary housing braze-ons.
· Machined and anodized 6061 aluminum, hinged clamp, 14g for 1-1/4" (31.8mm)
· Frame-mounted clamp-on housing to replace cable guide or lack of cable stop on framePOAPOA -
Stock Code:PSBR-BR4115$21.53 (RRP)POA
-
Stock Code:PSBR-BR4120$13.60 (RRP)POA
-
Stock Code:PSBR-BR0353
I-SpecBar Clamps are a one-piece hinged clamp adapters that allows users to mount I-Spec EV compatible shifters or dropper levers onto the handlebar, without requiring an I-Spec EV brake lever.
Sold individually, the clamp can be mounted to the right or left side
Hinged clamp for easy installation without removing other components
Black Anodized, CNC AL-6061 Aluminum
Compatible only with Shimano I-Spec EV compatible shifters or dropper post remotes
23g$76.99 (RRP)POA -
Stock Code:PSBR-LD0801
The I-Spec II Bar Clamp is a one-piece hinged clamp adaptor that allows users to mount I-Spec II compatible shifters or dropper levers onto the handlebar, without requiring a I-Spec II brake lever.
Sold individually, the clamp can be mounted to the right or left side
Hinged clamp for easy installation without removing other components
Black Anodized, CNC AL-6061 Aluminum
For use only with I-Spec II compatible shifters or brake levers
23 grams$76.99 (RRP)POA -
Stock Code:PSBR-BR0395Stock Code:PSBR-BR0394Stock Code:PSBR-BR0398Stock Code:PSBR-BR0393Stock Code:PSBR-BR0397
Problem Solvers MisMatch Adaptor 1.2, Shimano I-Spec II Brakes, SRAM Shifters, RIGHT ONLY
You need a MisMatch 1.2 adaptor for these model number Shimano brakes: BL-M9000, BL-M8000, BL-M7000$44.19 (RRP)POAPOAPOAPOAPOA -
Stock Code:PSBR-BR7000
ReMatch adaptors are designed to integrate different generations of Shimano Brakes to Shimano Shifters.
- Connects Shimano I-Spec A/B shifter to I-Spec II brake
- Made from CNC Machined T6061 Aluminum
- Anodized Black
- Includes RH & LH adaptors
- No additional hardware neededPOA -
Stock Code:PSBR-BR7001
ReMatch adaptors are designed to integrate different generations of Shimano Brakes to Shimano Shifters.
- Connects Shimano I-Spec A/B shifter to I-Spec II brake
- Made from CNC Machined T6061 Aluminum
- Anodized Black
- Includes RH adaptor only
- No additional hardware neededPOA -
Stock Code:PSBR-BR7002
ReMatch adaptors are designed to integrate different generations of Shimano Brakes to Shimano Shifters.
- Connects Shimano I-Spec A/B brake to I-Spec II Shifter
- Made from CNC Machined T6061 Aluminum
- Anodized Black
- Includes RH & LH adaptors, and all necessary hardware for both I-Spec A and I-Spec B brake
- No additional hardware neededPOA -
Stock Code:PSBR-BR7003
ReMatch adaptors are designed to integrate different generations of Shimano Brakes to Shimano Shifters.
- Connects Shimano I-Spec A/B brake to I-Spec II Shifter
- Made from CNC Machined T6061 Aluminum
- Anodized Black
- Includes RH adaptor only, and all necessary hardware for both I-Spec A and I-Spec B brake
- No additional hardware neededPOA -
Stock Code:SLBR-BR9999
Surly Rear Cable Hangers.
· Fits oversize post clamp bolts, such as Surly Constrictor (M8)
· Long length (76.5mm) to provide straighter cable routing and solve mushy brake feelPOA -
Stock Code:SLBR-FS0005
Rear disc brake adaptor specifically designed ONLY for the Surly Troll, Ogre, ECR and Pugsley.
- Compatible with IS frame mounts
- Brake caliper must be 74mm post mount compatible
- 160mm ROTORPOA -
Stock Code:WMBR-CA0009Stock Code:WMBR-CA0010
1-meter length
Spiral cable wrap is now available in 10-meter and 1-meter lengths. Manage those messy cables and achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.$13.65 (RRP)$28.35 (RRP) -
Stock Code:WMBR-FIT-1*Stock Code:WMBR-FIT-2*Stock Code:WMBR-FIT-BOT1$6.21 (RRP)$6.83 (RRP)$31.50 (RRP)
-
Stock Code:WMBR-M5-TORX10Stock Code:WMBR-M5-TORX12*$14.03 (RRP)$14.70 (RRP)
-
Stock Code:WMBR-BRAKENUT19$8.40 (RRP)
Add To Cart
