Seat Post Clamp

Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"

Specifications

- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty

Installation

- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.

Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"

Specifications

- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty

Installation

- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.

Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"

Specifications

- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty

Installation

- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.

Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"

Specifications

- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty

Installation

- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.

Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"

Specifications

- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty

Installation

- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.

Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"

Specifications

- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty

Installation

- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.

Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"

Specifications

- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty

Installation

- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.

Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"

Specifications

- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty

Installation

- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.

Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"

Specifications

- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty

Installation

- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.

Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"

Specifications

- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty

Installation

- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.

Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"

Specifications

- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty

Installation

- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.

Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"

Specifications

- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty

Installation

- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.

Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"

Specifications

- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty

Installation

- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.

Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"

Specifications

- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty

Installation

- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.

Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"

Specifications

- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty

Installation

- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.

Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"

Specifications

- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty

Installation

- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.

Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"

Specifications

- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty

Installation

- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.

Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"

Specifications

- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty

Installation

- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.