WOLF TOOTH PACK HANGER ALIGNMENT TOOL
Quick Release Adapter - add on part to allow the Thru Axle Kit to be used on quick release bikes
Quick Release Kit - works on 5mm quick release bikes
The Pack Hanger Alignment Tool allows quick adjustments to be made to the derailleur hanger while on the trail or in the workshop. Alignment fixes are quick and intuitive, as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. This new tool has included options for QR and thru axle. And for simple and durable storage, the components of this tool also nest inside of the handle.
- Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle.
- Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing.
- Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required.
Thru Axle Kit - works on 12mm thru axle bikes
The Pack Hanger Alignment Tool allows quick adjustments to be made to the derailleur hanger while on the trail or in the workshop. Alignment fixes are quick and intuitive, as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. This new tool has included options for QR and thru axle. And for simple and durable storage, the components of this tool also nest inside of the handle.
- Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle.
- Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing.
- Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required.
Thru Axle and Quick Release Kit - works on 12mm thru axle and 5mm quick release bikes
The Pack Hanger Alignment Tool allows quick adjustments to be made to the derailleur hanger while on the trail or in the workshop. Alignment fixes are quick and intuitive, as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. This new tool has included options for QR and thru axle. And for simple and durable storage, the components of this tool also nest inside of the handle.
- Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle.
- Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing.
- Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required.
Webshops and Bike shops
Related Products
-
Description
Our 6002 over axle adapter is used to press 6002 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6002 bearing
Outer Diameter: 31.8mm
Thickness: 7mm
Thru Hole Diameter: 15.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations) -
Description
Individual extractor for removing 609 & 9227 sealed bearings with 9mm inside diameter.
These bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.
All extractors are size specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor. If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt. -
Description
A new and more efficient take on the classic Wheels MFG threaded press handles. The Adjustable Press Stop makes life easier for bike mechanics as it allows for quick and accurate positioning at the press of a button. The Adustable Press Stop slides along 1/2" UNC threaded press rod when the button is depressed and can be placed quickly to secure drifts, spacers, and cups when completing maintenance or installation of bike headsets, bottom brackets, and bearings.
Product Details:
Compatible with new and existing Wheels MFG press kits which are sold separately including:
Press-7
Press-7-Pro
Press-8
Press-9-Pro -
Description
These extractors remove sealed bearings with inside diameters from 15,17,20 and 25mm.
Bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.
All extractors are size-specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor. If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt.
Removes these sealed bearing sizes: 6002, 6003, 6804, 6805Precision Machined
4-piece set includes:
(1) 15mm ID Bearing Extractor
(1) 17mm ID Bearing Extractor
(1) 20mm ID Bearing Extractor
(1) 25mm ID Bearing Extractor
(1) Spare parts bag
(1) bolt set -
Description
Another must-have tool for the busy bike shop. Our machined aluminum Speed Spacers take up extra space on our bearing presses so you don't need to spin the handles as far to tighten things up. They also work in axle configurations where you need to press in a bearing over an axle.
Length: 35mm
OD: 25.8mm
ID: 17.1mm
Machined Aluminum
Sold individually
