WOLF TOOTH PACK HANGER ALIGNMENT TOOL
Quick Release Adapter - add on part to allow the Thru Axle Kit to be used on quick release bikes
Quick Release Kit - works on 5mm quick release bikes
The Pack Hanger Alignment Tool allows quick adjustments to be made to the derailleur hanger while on the trail or in the workshop. Alignment fixes are quick and intuitive, as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. This new tool has included options for QR and thru axle. And for simple and durable storage, the components of this tool also nest inside of the handle.
- Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle.
- Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing.
- Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required.
Thru Axle Kit - works on 12mm thru axle bikes
The Pack Hanger Alignment Tool allows quick adjustments to be made to the derailleur hanger while on the trail or in the workshop. Alignment fixes are quick and intuitive, as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. This new tool has included options for QR and thru axle. And for simple and durable storage, the components of this tool also nest inside of the handle.
- Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle.
- Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing.
- Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required.
Thru Axle and Quick Release Kit - works on 12mm thru axle and 5mm quick release bikes
The Pack Hanger Alignment Tool allows quick adjustments to be made to the derailleur hanger while on the trail or in the workshop. Alignment fixes are quick and intuitive, as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. This new tool has included options for QR and thru axle. And for simple and durable storage, the components of this tool also nest inside of the handle.
- Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle.
- Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing.
- Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required.
Webshops and Bike shops
Related Products
-
Description
Another must-have tool for the busy bike shop. Our machined aluminum Speed Spacers take up extra space on our bearing presses so you don't need to spin the handles as far to tighten things up.
Compatible with:
- PRESS-4 - Economy Press
- PRESS-1 - Large Sealed Bearing Press
- PRESS-1 Handle & Rod Assembly
- Length: 30mm
- OD: 22mm
- ID: 10mm
- Machined Aluminum
- Anodized Red
- Sold individually -
Description
Individual extractor for removing 609 & 9227 sealed bearings with 9mm inside diameter.
These bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.
All extractors are size specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor. If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt. -
Description
An evolution of our original bushing toolset which required the use of a hammer to pound out shock bushings. The new design uses our threaded handle press system to easily and efficiently remove shock bushing in 12mm and 1/2 inch sizes.
Fits 12mm and 1/2" bushings.
Machined aluminum -
Description
BBI Shaft Clamp Set
Precision machined anodized aluminum clamps designed to allow for easy and secure clamping of round suspension components during service. Designed by Barnett Bicycle Institute and manufactured by Wheels Manufacturing.
Kit includes 3 pairs of of shaft clamps to fit 15 shaft diameters from 8mm to 28.6mm
- Suspension damper shafts
- Suspension damper cylinders
- Suspension air-spring cylinders
- Suspension piston shafts
- Thru-axles -
Description
You probably know that it's important to keep your workbench clean and organized, but it can be tough to do this when you're working on bikes. Parts and tools tend to scatter everywhere, and before you know it your bench is covered in grease, grime and you are missing half the parts.
Wheels Manufacturing has the perfect solution - the Ultimate Bike Benchtop Mat. This mat is designed specifically for keeping your workbench clean and organized while you work on your bike. The mat has an extra large work area, compartments for parts, tools, and components, so everything is within reach and easy to find. Plus, the mat has useful tools built in like metric and imperial rulers, ball bearing and sealed bearing gauges which make it easier to identify the parts you need when working on your bike. Don't go another day without this essential tool in your cycling arsenal.
- Built in gauge to easily and accurately identify outside and inside diameter of sealed bearings.
- Identifying ball bearing has never been easier with this ramped gauge that lets ball bearings roll into their identifying slot.
- Convenient metric and imperial ruler to quickly measure components
Benchtop mat details:
- Durable rubber-like PVC construction. Cleans easily and looks great on any bench
- Overall size 20”x12-¾” (Larger than other mats on the market)
- 12”x9.5” raised work area
- Imperial Ruler 0-12in
- Metric Ruler 0-48cm
- 4 sloped pockets
- 5 deep pockets
- Sealed bearing gauge
- Ball bearing gauge (1/8, 5/32, 3/16, 7/32, 1/4, 5/16)
