WOLF TOOTH BB SOCKETS
BBS4116: 16 notch BB socket for 41mm diameter notch pattern, Shimano 105, Ultegra BBR60 and 6800, XT MT-800
Wolf Tooth bottom bracket sockets are tools for installation and removal of external cup bottom brackets. They are machined in Minnesota with 7075-T6 aluminum.
- Large finger notches so you can start threading the cups by hand
- 3/8" square socket or 1" hex for ratchet/torque wrench
- Most sockets have either a Shimano bearing preload tool or a 16mm hex for use with Race Face Cinch cranksets
- Steel inserts for magnetic coupling compatibility with the Pack Wrench
BBS4416: 16 notch BB socket for 44mm diameter notch pattern, Shimano BB80, BB5700, BB70, BB51, Enduro T47, Wheels T47, many from Hollowtech II, Campagnolo, Chris King, FSA MegaExo, Hope, SRAM/Truvativ GXP, Race Face X-type, Surly, and more
Wolf Tooth bottom bracket sockets are tools for installation and removal of external cup bottom brackets. They are machined in Minnesota with 7075-T6 aluminum.
- Large finger notches so you can start threading the cups by hand
- 3/8" square socket or 1" hex for ratchet/torque wrench
- Most sockets have either a Shimano bearing preload tool or a 16mm hex for use with Race Face Cinch cranksets
- Steel inserts for magnetic coupling compatibility with the Pack Wrench
BBS4612: 12 notch BB socket for 46mm diameter notch pattern, BB386, Race Face 30mm Spindle, TF47, SRAM DUB, RaceFace Cinch, Zipp Vuma, Rotor BSA30, Hawk Racing BB3086, Cane Creek Hellbender, and more.
Wolf Tooth bottom bracket sockets are tools for installation and removal of external cup bottom brackets. They are machined in Minnesota with 7075-T6 aluminum.
- Large finger notches so you can start threading the cups by hand
- 3/8" square socket or 1" hex for ratchet/torque wrench
- Most sockets have either a Shimano bearing preload tool or a 16mm hex for use with Race Face Cinch cranksets
- Steel inserts for magnetic coupling compatibility with the Pack Wrench
BBS4816: 16 notch BB socket for 48mm diameter notch pattern, FSA 386 MegaEvo, Wheels PF30, BSA30, BB386, and more
Wolf Tooth bottom bracket sockets are tools for installation and removal of external cup bottom brackets. They are machined in Minnesota with 7075-T6 aluminum.
- Large finger notches so you can start threading the cups by hand
- 3/8" square socket or 1" hex for ratchet/torque wrench
- Most sockets have either a Shimano bearing preload tool or a 16mm hex for use with Race Face Cinch cranksets
- Steel inserts for magnetic coupling compatibility with the Pack Wrench
Webshops and Bike shops
Related Products
-
Description
Our 6806 open bore adapter is used to press 42x30 sealed bearings. The adapter is machined with one step at 30mm OD, which fits in to the center of the sealed bearing. Common bearing size for BB30 frames and bottom brackets.
Installs: 6806 bearing
Inner Step Outer Diameter: 29.9mm
Outer Diameter: 41.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations) -
Description
Individual extractor for removing 6002, 6702, 6802, 6902, 15268 & 15267 sealed bearings with 15mm inside diameter.
These bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.
All extractors are size specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor. If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt. -
Description
Precision machined anodized aluminum clamps designed to allow for easy and secure clamping of round components during service. Designed with strong magnet inserts to keep the shaft clamps securely in place when used with a vice clamp.
Includes 1 pairs of of shaft clamps to fit shaft diameters:
23.8mm
25.4mm
28.6mm -
Description
The Softy has a dirty great big head with silky-soft bristles to be kind on paint and tough on grime. The angled head makes it a doddle to use whilst the rubberised impact zones prevent any unwanted knocks or scrapes.
As with all things, go steady. Excessive rubbing or pressure won’t do any good and could lead to surface scratching. For really sensitive bits, we’d recommend a sponge or microfibre cloth.
Please note: You should avoid boiling water or hot parts with the Big Softy. If bristles work out of shape, place the brush in hot water at 80°C for 20 seconds and then shake to restore them to their original condition.
FEATURES:
- Large brush head
- Soft bristle tips
- Tough impact resistant rubberised handle and impact zones
- Angled for easy use
- Ideal for wheels, tyres, frame, forks etcExpected Date:10 January 2025
