WHEELS MFG OVER AXLE ADAPTER
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Our 6001 over axle adapter is used to press 6001 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6001 bearing
Outer Diameter: 27.8mm
Thickness: 7mm
Thru Hole Diameter: 12.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Our 6002 over axle adapter is used to press 6002 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6002 bearing
Outer Diameter: 31.8mm
Thickness: 7mm
Thru Hole Diameter: 15.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Our 6003 over axle adapter is used to press 6003 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6003 bearing
Outer Diameter: 34.8mm
Thickness: 7mm
Thru Hole Diameter: 17.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
These drifts are spares for your most commonly used bearing sizes. They're also an excelent addition to the Press-4
Our 6803 over axle adapter is used to press 6803 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6803 bearing
Outer Diameter: 25.8mm
Thickness: 20mm
Thru Hole Diameter: 17.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Our 6804 over axle adapter is used to press 6804 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6804 bearing
Outer Diameter: 31.8mm
Thickness: 20mm
Thru Hole Diameter: 20.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Our 6900 over axle adapter is used to press 6900 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6900 bearing
Outer Diameter: 21.8mm
Thickness: 40mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Our 6901 over axle adapter is used to press 6901 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6901 bearing
Outer Diameter: 23.8mm
Thickness: 17mm
Thru Hole Diameter: 12.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Our 6901 over axle adapter is used to press 6901 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6901 bearing
Outer Diameter: 23.8mm
Thickness: 40mm
Thru Hole Diameter: 12.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
These drifts are spares for your most commonly used bearing sizes. They're also an excelent addition to the Press-4
Our 6903 over axle adapter is used to press 6903 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6903 bearing
Outer Diameter: 29.8mm
Thickness: 7mm
Thru Hole Diameter: 17.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Our 6904 over axle adapter is used to press 6904 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6904 bearing
Outer Diameter: 37.8mm
Thickness: 7mm
Thru Hole Diameter: 20.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Webshops and Bike shops
Related Products
-
Description
Ultralight Cassette Lock Ring Wrench Insert - cassette lockrings and some centerlock rotor lockrings
Steel hex wrench inserts were designed to pair with the Pack Wrench - Ultralight 1 Inch Hex and Bottom Bracket Wrench.
- The aluminum wrench (sold separately) has magnets that hold the inserts in place
- Made in the USA and CNC machined from hardened steel with electroless nickel plating
- Inserts each sold separately
We travel a lot with our bikes and are always looking for the leanest way to have everything we need to build or service a bike without packing 50 lbs of tools. To help with this we developed some very specific Pack Tools that are high quality but weight conscious for those that do mobile wrenching, travel with their bike, or just want one set of tools that can be thrown in when heading to the trail. While the Pack Wrench is lightweight, we wouldn't necessarily call the inserts lightweight. We made the inserts out of steel for extra strength and durability.Expected Date:16 December 2024 -
Description
The Double Ender brush is a flexible, stiff and double-pronged brush that'll leave your dirty bits gleaming.
It comes with a tough rubber handle and hard-wearing bristles for anything that’s filthy enough to need a proper scrubbing. It's built to be stiff enough to really take some welly but flexible enough to reach those tricky spots.
As with all things, go steady. Excessive rubbing or pressure won’t do any good and could lead to surface scratching. For really sensitive bits, we’d recommend a sponge or microfibre cloth.
- Removes dirt from hard to reach areas
- Adjustable prongs
- Hard wearing nylon bristles
- Tough impact resistant rubberized handle and impact zones
- Ideal for linkages, discs, shocks, pedals, chainstays, spokes etc -
Description
The Juice Rag is a microfibre cloth that’ll transform your bike from rags to riches. It’s your best buddy for the finishing strokes of your bike wash, polishing those fine details to perfection.
Big and tough, yet soft and smooth, the Rag is great for buffing and burnishing, wiping up spills and giving everything a good rub down. The Juice Rag is machine washable, heavy duty and super absorbent.
Washing instructions: Wash separately at 40°C, do not use fabric conditioner, do not machine dry. -
Description
The Wheels MFG Centerlock Socket is designed to create a tight grip on a standard 44mm Centerlock Rotor Lockring to avoid slipping while torquing lockrings onto Centerlock Hubs. Designed to be used with a 3/8” drive socket or torque wrench for easy installation and removal The socket can also be used with 3/8" ACME threaded press rods and adjustable press stop to prevent slipping. (Not Included). 6061 Aluminum Color: Red
-
Description
E-bike Hub Drive Cassette Socket Bafang
E-bikes are here to stay! Designed to save the mechanic time and money, our new e-bike sockets are machined to match manufacturer specifications.
The E-bike Hub Drive Cassette Socket is used installing and removing compatible cassettes on Bafang hub-drive motors without removing motor wiring.
- 8620 Steel
- Zinc finish
