Halo T2 24inch Rear135QR 36H Wheel
Description
Middleweight multi-purpose 24" MTB wheels.
Light and strong, angular style box section rim, with eyelets and a stable screw-pin joint.
The front wheel features the Halo MT front hub and the rear comes with our sealed bearing Halo Spin Doctor hub.
Both wheels come with black ED finished spokes.
The Black Anodised finish 32mm rims are suitable for Vs or Disc brakes, whilst the White Powder coated option is recommended for disc use only.
Note: Anodised finish rims will accept V-brakes but the brake surface colour finish will wear.
Rear: 135 x 9mm QR
Webshops and Bike shops
You may also be interested in...
-
Stock Code:HLWL-WHHAH6JVK
Chaos are the World Championship winning, benchmark wheels for dirt jumping.
Used and loved world over by riders and endorsed by international professionals Sam Pilgrim and Matt Jones. Chaos wheels are at the pinnacle of dirt jump wheels that stand up to the hardest of use.
These wheels utilise our tried and tested Chaos rim which offers tubeless compatibility where required, as well as a 22.5mm internal (28mm external) width. These widths have been optimised for strength in addition to tyre profiling.
The rear wheels are built around our single speed specific DJD hubs. These feature our 120 point pick up Supadrive freehub system on a reliable Bushdrive bushing system which enables the use of cogs as small as 9 tooth.
All of our DJ series hubs utilise large sealed bearings for longevity and super wide spaced flanges for increased stiffness and durability.
*** Our rear wheels no longer come with a sprocket included, so please choose an additional ‘DJD Supadrive and Bushdrive Sprocket’ to suit your bike.
Included Fittings
Rear Standard: 135mm x m10 bolt in axle system with 14mm adaptors$590.00 (RRP)Add To Cart
-
Stock Code:HLWL-WHHAV3BVZStock Code:HLWL-WHHAV3BVZXStock Code:HLWL-WHHAV39VZXStock Code:HLWL-WHHAV39VZ
Our line of Vapour wheels are the lightweight edge.
The trail focused Vapour 35 wheels are built with outright speed and reliability in mind.
Utilising a wide 30mm internal width rim the Vapour 35 wheels bridge the gap between plus sized wheels and more narrow traditional offerings. With a greater width comes increased tyre volume and stability.
In addition to an adept rim, the Vapour 35 wheels utilise our new and improved instantaneous 120 point pickup MT Supadrive and MT Front hubs, with sealed bearings and wide spaced flanges for increased stiffness and durability.
Supplied pre-taped the Vapour 35 is tubeless ready from the box.
The Vapour 35 wheel set is also available with the option of a MT 6Drive hub, for a quieter 30 click drive.
Rims: Sleeve jointed, tubeless-ready, alloy clincher
Spokes: Black double butted stainless spokes
Nipples: Black ED coated brass nipples
Rim Depth: 19mm
Internal Width: 30mm
External Width: 35mm
Drillings: 32H
Disc Mount: IS 6-Bolt
Spoke pattern: 3 cross
Recommended Tyre size: 2.25- 2.8"
Tubeless: Tubeless ready
Colour: Anodised black hub and rim with anodised black laser etched graphics$620.00 (RRP)$620.00 (RRP)$620.00 (RRP)$620.00 (RRP) -
Stock Code:HLWL-WHHA24KF
Middleweight multi-purpose 24? MTB wheels.
Light and strong, angular style box section rim, with eyelets and a stable screw-pin joint.
The front wheel features the Halo MT front hub and the rear comes with our sealed bearing Halo Spin Doctor hub.
Both wheels come with black ED finished spokes.
The Black Anodised finish 32mm rims are suitable for Vs or Disc brakes, whilst the White Powder coated option is recommended for disc use only.
Note: Anodised finish rims will accept V-brakes but the brake surface colour finish will wear.
Included Fittings Front: 100 x 15mm thru$280.00 (RRP)Add To Cart
-
Stock Code:HLWL-WHHAS6FK
Our SAS wheels need no introduction and have a proven record for re-defining what strength is.
Utilising a 30mm internal, T-10 heat treated alloy rim the SAS wheel set is the go to option for anyone who is looking for reliable and sturdy all use mountain bike wheels.
As well as a hugely capable rim, the SAS wheels utilise our new and improved instantaneous 120 point pickup MT Supadrive and MT Front hubs, with sealed bearings and wide spaced flanges for increased stiffness and durability.
The anodised versions of our SAS rims can also be used with rim brakes. Naturally, the anodised finish will wear and reveal the silver coloured aluminium.
As the braking surface is not CNC finished, there is a bedding in period.
Front: 100 x 15mm thru$290.00 (RRP)Add To Cart
-
Stock Code:HLWL-WHHAH6PBSX
A tribute to Halo’s history in the dirt jump and MTB market, we have created this retro-inspired Chaos Dirt Jump Wheelset.
Featuring the iconic wide boy front hub and MT-SS 135mm x M10 (which is adaptable for 142mm X 12mm for thru-axle frames) They are laced with Stainless double butted silver spokes and black brass nipples to the durable Chaos rim. For this edition, we have shot peened and anodised the Chaos rims in a classic grey colour. Tubeless taped and ready out the box.
Utilising our tried and tested Chaos rim which offers tubeless compatibility where required, as well as a 22.5mm internal (28mm external) width. These widths have been optimised for strength in addition to tyre profiling.
To offer versatility the front hub is adaptable to fit both older and more modern frame standards. The optional adaptors for various fork types further enhance compatibility, allowing riders to customise their setup according to their preferences.
This hub comes as 15x100mm thru axle as standard.
The use of the MT Supadrive SS hub on the rear wheel is a great choice for high-performance riding, with its 120-point Supadrive mechanism and sealed bearings, it provides a smooth and reliable power transfer. Additionally, the cassette spacer kit (1x 5mm, 2x 2.5mm, 1x 0.5mm and Lock ring.) and the option to use Fat foot sprockets in a range of sizes offer further customisation possibilities for riders seeking the perfect gear ratio.$980.00 (RRP)Add To Cart
