Wheels MFG BBI Shaft Clamp
Description
BBI Shaft Clamp Set
Precision machined anodized aluminum clamps designed to allow for easy and secure clamping of round suspension components during service. Designed by Barnett Bicycle Institute and manufactured by Wheels Manufacturing.
Kit includes 3 pairs of of shaft clamps to fit 15 shaft diameters from 8mm to 28.6mm
- Suspension damper shafts
- Suspension damper cylinders
- Suspension air-spring cylinders
- Suspension piston shafts
- Thru-axles
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-SS-30Stock Code:WMTL-SS-15-25Stock Code:WMTL-SS-17-25Stock Code:WMTL-SS-17-35
Another must-have tool for the busy bike shop. Our machined aluminum Speed Spacers take up extra space on our bearing presses so you don't need to spin the handles as far to tighten things up. 15mm thru hole size makes this perfect for use on hubs with larger axles.
Compatible with:
PRESS-4 - Economy Press
PRESS-1 - Large Sealed Bearing Press
PRESS-1 Handle & Rod Assembly
Length: 25mm
OD: 23.8mm
ID: 15.1mm
Machined Aluminum
*Sold individually$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP) -
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)Expected Date:20 January 2025Expected Date:20 January 2025Expected Date:20 January 2025Expected Date:20 January 2025$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:WMTL-6000OA-6Stock Code:WMTL-6001OA-7Stock Code:WMTL-6002OA-7Stock Code:WMTL-6003OA-7Stock Code:WMTL-6802OA-20Stock Code:WMTL-6803OA-20Stock Code:WMTL-6804OA-20Stock Code:WMTL-6900OA-40Stock Code:WMTL-6901OA-2Stock Code:WMTL-6901OA-40Stock Code:WMTL-6902OA-7Stock Code:WMTL-6903OA-7Stock Code:WMTL-6904OA-7
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)Expected Date:20 January 2025Expected Date:20 January 2025Expected Date:20 January 2025$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP) -
Stock Code:WMTL-BP0001
Gone are the days when shop mechanics grabbed whatever socket was close enough to the sealed bearing size and just tapped it in. The Bearing Press Pro Kit replaces that archaic installation system, providing the right tool for the job.
The Bearing Press Pro Kit installs 14 bearing sizes including today's most common bottom bracket and thru axle bearings. The kit also includes linkage offsets for full suspension bearing installation and 7 speed spacers for faster installs. All parts are laser etched for easy identification.
PRESS-1 includes:
(2) T-Handles with 3/8" Acme threaded rod
(2) 15mm x 25mm Speed Spacer
15mm x 35mm Speed Spacer
17mm x 25mm Speed Spacer
17mm x 35mm Speed Spacer
20mm x 25mm Speed Spacer
20mm x 35mm Speed Spacer
(2) 30mm Speed Spacer
(2) 20mm frame linkage standoffs
(2) 30mm frame linkage standoffs
Open Bore Drifts for the following bearing sizes:
(2) 6802
(2) 6803
(2) 6804
(2) 6901
(2) 6902
(2) 6903
(2) 15x26
(2) 27.7x37
Over Axle Drifts for the following bearing sizes:
(2) 6802x20mm
(2) 6803x20mm
(2) 6804x20mm
(2) 6901x40mm
(2) 6902x7mm
(2) 6903x7mm$445.00 (RRP)Add To Cart
-
Stock Code:JLTL-BS1
The Softy has a dirty great big head with silky-soft bristles to be kind on paint and tough on grime. The angled head makes it a doddle to use whilst the rubberised impact zones prevent any unwanted knocks or scrapes.
As with all things, go steady. Excessive rubbing or pressure won’t do any good and could lead to surface scratching. For really sensitive bits, we’d recommend a sponge or microfibre cloth.
Please note: You should avoid boiling water or hot parts with the Big Softy. If bristles work out of shape, place the brush in hot water at 80°C for 20 seconds and then shake to restore them to their original condition.
FEATURES:
- Large brush head
- Soft bristle tips
- Tough impact resistant rubberised handle and impact zones
- Angled for easy use
- Ideal for wheels, tyres, frame, forks etcExpected Date:10 January 2025$30.90 (RRP)
