Wheels MFG Thin Flange BB Socket 48mm
Description
Thin Flange Bottom Bracket Socket Designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. This single-sided socket is used for installing and removing 48.5mm, 16-notch bottom bracket cups. The socket has a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and locks onto 1/2 inch UNC press rod for secure and easy installation of thin flanged bottom brackets. Machined 6061 Aluminum Anodized Red.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-BR-5
Wheels Mfg Bottom Bracket wall chart shows most popular bottom bracket standards and cranksets in an easy to read reference chart detailing the easiest way to determine what bottom bracket, cranks and adapters your shop will need to service most bicycles.
- 24" wide x 36" high
- Printed on one side only$10.00 (RRP) -
Stock Code:WMTL-BBTOOL-48-44
Double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups. Compatible with all Wheels Manufacturing bottom brackets. Socket is machined for 1/2" drive, but a 3/8" to 1/2" adapter is included so you can use it with 3/8" drive torque wrenches.
48.5mm, 16-notch pattern matches up with Wheels Mfg bottom brackets, along with some FSA MegaEVO bottom brackets. The 44mm, 16-notch side matches up with Wheels Manufacturing bottom brackets, along with many other outboard bearing bottom brackets including Shimano, FSA MegaEXO and SRAM/Truvativ.$115.00 (RRP)Add To Cart
-
Stock Code:WMTL-GXP22-EXTStock Code:WMTL-BE-22MM-SETStock Code:WMTL-BE-24MM-SETStock Code:WMTL-24X37-EXTStock Code:WMTL-BE-25MM-SETStock Code:WMTL-29MM-EXTStock Code:WMTL-BE-29MM-SETStock Code:WMTL-BE-30MM-SETStock Code:WMTL-608-EXTStock Code:WMTL-609-EXTStock Code:WMTL-6000-EXTStock Code:WMTL-6001-EXTStock Code:WMTL-6002-EXTStock Code:WMTL-6003-EXTStock Code:WMTL-6804-EXTStock Code:WMTL-6805-EXTStock Code:WMTL-6806-EXTStock Code:WMTL-EX0001Stock Code:WMTL-EX0002Stock Code:WMTL-EX0003Stock Code:WMTL-BE-PUSHERStock Code:WMTL-PUSHERStock Code:WMTL-R6-EXT
6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor
Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings
6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing
Tap the extractor out with a punch$49.00 (RRP)$65.00 (RRP)$65.00 (RRP)$75.00 (RRP)$65.00 (RRP)$72.00 (RRP)$65.00 (RRP)$65.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$74.00 (RRP)$74.00 (RRP)$74.00 (RRP)$239.00 (RRP)$239.00 (RRP)$255.00 (RRP)$26.00 (RRP)$19.00 (RRP)$75.00 (RRP) -
Stock Code:WMTL-BP0006
Designed to press in all current Wheels Mfg bottom brackets! Our do-it-all Essential Bottom Bracket Press. Economical and easy to use, this tool is made up of two machined aluminum handles, 1/2" threaded rod and one machined aluminum frame drift.
Each drift is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed in the Compatibility tab below. No more searching for the correct size drifts and parts. Just match up the drift to your frame's BB shell size and your bottom bracket's bearing size and press.
1/2" diameter threaded rod resists bending, allowing for the cups to align and press in straight. Drifts can also can be used as a frame bottom bracket shell sizing guide! Machined aluminum handles and drifts Red anodized drifts and handles Steps on drift are marked with diameter sizes Zinc-plated 1/2" diameter threaded rod Works with BB shells up to 132mm wide Includes one frame drift.
- 6802/29 OB 1/2" x 2
- 22x37 Drift 1/2" x 2
- 6806 OB 1/2" x 2
- 24x37 OB 1/2" x 2
- 1/2" Frame Drift
- 1/2-13 x 9.7" Threaded Rod UNC$215.00 (RRP)Add To Cart
-
Stock Code:WMTL-BP0021
Thin Flange Bottom Bracket Sockets Designed to create a tight grip on thin flange bottom brackets to avoid slipping while torquing cups into bike frames. These single-sided sockets are used for installing and removing 48.5mm, 16-notch, 54mm 16-notch and 54mm 12-notch bottom bracket cups.
The sockets have a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and locks onto 1/2 inch UNC press rod for secure and easy installation of thin flanged bottom brackets. Machined 6061 Aluminum Anodized Red
Kit includes:
(1) 1/2" UNC Threaded Rod
(1) 1/2" Adjustable Press Stop
(1) 6806/29 Bearing Drift
(1) 6806 Bearing Drift
(1) 24x37 Bearing Drift
(1) Wheels MFG Thin Flange Bottom Bracket Socket for 48.5mm, 16-notch pattern.
(1) SRAM Thin Flange T47 Bottom Bracket Socket for 54mm 16-notch pattern.
(1) Praxis Thin Flange T47 Bottom Bracket Socket for 54mm 12-notch pattern.$345.00 (RRP)Add To Cart
