Halo Gravitas MTC 29 Boost ShimanoMS
Description
Designed for and tested on the Downhill World Cup Circuit, for lap-crushing confidence.
With a honed 27.5mm internal width, Gravitas wheels offer tyres large sidewall support, while remaining narrow enough to avoid unnecessary rock collisions.
Using our tried and tested asymmetric design we have equalised spoke tensions and built a package that dominates descents, whilst cutting down on bulk where it isn’t needed. To compensate for the differences in wall length and strength of an asymmetric design, the wall thicknesses have been proportioned to balance out impact forces equally. The Gravitas offers offset wheel benefits, without compromise.
At the core of these Gravitas wheels are our all-new instantaneous 120 point pick-up MTC Supadrive Boost and MTC Front Boost hubs, with sealed bearings and super-wide spaced flanges for increased stiffness and durability.
100% hand-built and pre-fitted with tubeless tape, Gravitas wheels are tubeless-ready from the box.
- Rear Boost 114mm
- Rim Depth 20mm
- Internal Rim Width 27.5mm
- External Rim Width 33mm
- Drillings 32H
- Disc Mount 6 CENTER LOCK
- Recommended Tyre size 2.25-2.7"
- Tubeless ready
Webshops and Bike shops
You may also be interested in...
-
Stock Code:HLWL-WHHAD2KRS
The Devaura Series is ready whatever the conditions, to offer you the aerodynamic advantage.
Our brand new Devaura Disc RD2 wheels utilise Center Lock disc brake technology, allowing consistently powerful braking on the road and CX courses alike.
The 19mm internal, 24mm external rim widths allow you to run your choice of traditional or tubeless tyres and are well suited to modern tyres ranging from 25C through to 38C widths to deliver enhanced comfort and grip.
At the core of our Devaura Disc RD2 wheels are our all new 120 point pick up RD2 Supadrive and RD2 Front hubs, with sealed bearings and wide spaced flanges for increased durability. These are hand built onto the dependable 30mm deep rims with our very own Aero Racing bladed spokes to decrease wind resistance. Both front and rear wheels use a 16/8e lacing pattern to balance spoke tensions and withstand torque and braking forces from centre of the wheels, reducing any possible lateral flex and increase power transfer.
Supplied pre-taped, Devaura Disc RD2 wheels are tubeless ready from the box.
Included Fittings
Rear: 142 x 12mm Alloy thru (135 x QR5/10mm available aftermarket)$650.00 (RRP)Add To Cart
-
Stock Code:HLWL-WHHAH6JVK
Chaos are the World Championship winning, benchmark wheels for dirt jumping.
Used and loved world over by riders and endorsed by international professionals Sam Pilgrim and Matt Jones. Chaos wheels are at the pinnacle of dirt jump wheels that stand up to the hardest of use.
These wheels utilise our tried and tested Chaos rim which offers tubeless compatibility where required, as well as a 22.5mm internal (28mm external) width. These widths have been optimised for strength in addition to tyre profiling.
The rear wheels are built around our single speed specific DJD hubs. These feature our 120 point pick up Supadrive freehub system on a reliable Bushdrive bushing system which enables the use of cogs as small as 9 tooth.
All of our DJ series hubs utilise large sealed bearings for longevity and super wide spaced flanges for increased stiffness and durability.
*** Our rear wheels no longer come with a sprocket included, so please choose an additional ‘DJD Supadrive and Bushdrive Sprocket’ to suit your bike.
Included Fittings
Rear Standard: 135mm x m10 bolt in axle system with 14mm adaptors$590.00 (RRP)Add To Cart
-
Stock Code:HLWL-WHHAVX7VZStock Code:HLWL-WHHAVX7VZXStock Code:HLWL-WHHAVX9VZStock Code:HLWL-WHHAVX9VZX
Built around the traverses of the Enduro World Series our Vortex wheels redefine what Enduro wheels are.
With a generous 33mm internal width Vortex wheels increase tyre volume and maximise the available grip on offer. Using an asymmetric design we have equalised spoke tensions and built a package that leaves descents in its wake, whilst cutting down weight where it isn’t needed for energy sapping climbs. To compensate for the differences in wall length and strength of an asymmetric design, the wall thicknesses have been proportioned to balance out impact forces equally. The Vortex offers offset wheel benefits, without compromise.
At the core of our Vortex wheels are our new and improved instantaneous 120 point pick up MT Supadrive and MT Front hubs, with sealed bearings and super wide spaced flanges for increased stiffness and durability.
100% hand built and pre fitted with tubeless tape, Vortex wheels are tubeless ready from the box.
Coloured decal kits available aftermarket.
Spokes: Black double butted stainless spokes
Nipples: Black ED coated brass nipples
Rim Depth: 20.75mm
Internal Width: 33mm
External Width:38mm
Rim Joint type: Sleeved
Drillings: 32H
Freehub: Shimano HG or SRAM XD versions
Freehub Body: Alloy
Drive System: Supadrive
Disc Mount: 6 Bolt
Spoke pattern: Front 2X, Rear 3X
Recommended Tyre size: 2.35-2.8"
Tubeless: Tubeless ready$590.00 (RRP)$590.00 (RRP)$590.00 (RRP)$590.00 (RRP) -
Stock Code:HLWL-WHHAV3BVZStock Code:HLWL-WHHAV3BVZXStock Code:HLWL-WHHAV39VZXStock Code:HLWL-WHHAV39VZ
Our line of Vapour wheels are the lightweight edge.
The trail focused Vapour 35 wheels are built with outright speed and reliability in mind.
Utilising a wide 30mm internal width rim the Vapour 35 wheels bridge the gap between plus sized wheels and more narrow traditional offerings. With a greater width comes increased tyre volume and stability.
In addition to an adept rim, the Vapour 35 wheels utilise our new and improved instantaneous 120 point pickup MT Supadrive and MT Front hubs, with sealed bearings and wide spaced flanges for increased stiffness and durability.
Supplied pre-taped the Vapour 35 is tubeless ready from the box.
The Vapour 35 wheel set is also available with the option of a MT 6Drive hub, for a quieter 30 click drive.
Rims: Sleeve jointed, tubeless-ready, alloy clincher
Spokes: Black double butted stainless spokes
Nipples: Black ED coated brass nipples
Rim Depth: 19mm
Internal Width: 30mm
External Width: 35mm
Drillings: 32H
Disc Mount: IS 6-Bolt
Spoke pattern: 3 cross
Recommended Tyre size: 2.25- 2.8"
Tubeless: Tubeless ready
Colour: Anodised black hub and rim with anodised black laser etched graphics$620.00 (RRP)$620.00 (RRP)$620.00 (RRP)$620.00 (RRP) -
Stock Code:HLWL-WHHAVX7VZStock Code:HLWL-WHHAVX7VZXStock Code:HLWL-WHHAVX9VZStock Code:HLWL-WHHAVX9VZX
Built around the traverses of the Enduro World Series our Vortex wheels redefine what Enduro wheels are.
With a generous 33mm internal width Vortex wheels increase tyre volume and maximise the available grip on offer. Using an asymmetric design we have equalised spoke tensions and built a package that leaves descents in its wake, whilst cutting down weight where it isn’t needed for energy sapping climbs. To compensate for the differences in wall length and strength of an asymmetric design, the wall thicknesses have been proportioned to balance out impact forces equally. The Vortex offers offset wheel benefits, without compromise.
At the core of our Vortex wheels are our new and improved instantaneous 120 point pick up MT Supadrive and MT Front hubs, with sealed bearings and super wide spaced flanges for increased stiffness and durability.
100% hand built and pre fitted with tubeless tape, Vortex wheels are tubeless ready from the box.
Coloured decal kits available aftermarket.
Spokes: Black double butted stainless spokes
Nipples: Black ED coated brass nipples
Rim Depth: 20.75mm
Internal Width: 33mm
External Width:38mm
Rim Joint type: Sleeved
Drillings: 32H
Freehub: Shimano HG or SRAM XD versions
Freehub Body: Alloy
Drive System: Supadrive
Disc Mount: 6 Bolt
Spoke pattern: Front 2X, Rear 3X
Recommended Tyre size: 2.35-2.8"
Tubeless: Tubeless ready$590.00 (RRP)$590.00 (RRP)$590.00 (RRP)$590.00 (RRP)
