WolfTooth 6Bit Hex Multi Keychain Blue
Description
The new Wolf Tooth 6-Bit Hex Wrench is a slim, strong multi-tool with 11 functions for common bike repairs and everyday needs. Six hex bits are stored inside the handles that fit into the end of a ball detent swivel head for use. The 11 functions include: 2, 2.5, 3, 4, 5, 6, and 8mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible bits. All bits are ED-coated and corrosion-resistant. It is small enough to fit into a riding tool wrap or pocket, and has an optional keyring attachment to fit on any keychain for use away from the bike.
The keyring attachment is an option for those who like to have a multi-tool on or off the bike for everyday-carry needs. The 6-Bit Hex Bit Wrench is locked shut while the keyring is attached. This prevents it from opening while you’re on the go. Then when you need to use the multi-tool, press the end of the keyring attachment to detach it from your keyring. When you’re done using it, close the handles and click it back onto the keyring attachment to lock it shut once again. The handles also have a magnetic closure to keep it closed when the keyring attachment is not connected.
• All bits are ED-coated and corrosion-resistant
• Magnets keep all bits in place and secure
• Ball detent swivel head tested to over 40Nm of torque
• Same bits as 8-Bit System and EnCase System multi-tools
• Optional ball detent keychain locks multi-tool closed
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-6000OA-6Stock Code:WMTL-6001OA-7Stock Code:WMTL-6002OA-7Stock Code:WMTL-6003OA-7Stock Code:WMTL-6802OA-20Stock Code:WMTL-6803OA-20Stock Code:WMTL-6804OA-20Stock Code:WMTL-6900OA-40Stock Code:WMTL-6901OA-40Stock Code:WMTL-6902OA-7Stock Code:WMTL-6903OA-7Stock Code:WMTL-6904OA-7
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)Stock Level:In StockStock Level:1Stock Level:1Stock Level:1Stock Level:2Stock Level:2Stock Level:2Stock Level:1Stock Level:2Stock Level:1Stock Level:2Stock Level:2Stock Level:In Stock$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP) -
Stock Code:WTTLFWI-LR
Ultralight Cassette Lock Ring Wrench Insert - cassette lockrings and some centerlock rotor lockrings
Steel hex wrench inserts were designed to pair with the Pack Wrench - Ultralight 1 Inch Hex and Bottom Bracket Wrench.
- The aluminum wrench (sold separately) has magnets that hold the inserts in place
- Made in the USA and CNC machined from hardened steel with electroless nickel plating
- Inserts each sold separately
We travel a lot with our bikes and are always looking for the leanest way to have everything we need to build or service a bike without packing 50 lbs of tools. To help with this we developed some very specific Pack Tools that are high quality but weight conscious for those that do mobile wrenching, travel with their bike, or just want one set of tools that can be thrown in when heading to the trail. While the Pack Wrench is lightweight, we wouldn't necessarily call the inserts lightweight. We made the inserts out of steel for extra strength and durability.Stock Level:1Stock Level:1$35.00 (RRP)Add To Cart
-
Stock Code:WTTLOP5SILStock Level:1Stock Level:1$25.00 (RRP)
Add To Cart
-
Stock Code:WMTL-EX0002
These extractors remove sealed bearings with inside diameters from 15,17,20 and 25mm.
Bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.
All extractors are size-specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor. If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt.
Removes these sealed bearing sizes: 6002, 6003, 6804, 6805Precision Machined
4-piece set includes:
(1) 15mm ID Bearing Extractor
(1) 17mm ID Bearing Extractor
(1) 20mm ID Bearing Extractor
(1) 25mm ID Bearing Extractor
(1) Spare parts bag
(1) bolt setStock Level:Out Of StockStock Level:Out of Stock$239.00 (RRP) -
Stock Code:WTTL-BBS4816
BBS4816: 16 notch BB socket for 48mm diameter notch pattern, FSA 386 MegaEvo, Wheels PF30, BSA30, BB386, and more
Wolf Tooth bottom bracket sockets are tools for installation and removal of external cup bottom brackets. They are machined in Minnesota with 7075-T6 aluminum.
- Large finger notches so you can start threading the cups by hand
- 3/8" square socket or 1" hex for ratchet/torque wrench
- Most sockets have either a Shimano bearing preload tool or a 16mm hex for use with Race Face Cinch cranksets
- Steel inserts for magnetic coupling compatibility with the Pack WrenchStock Level:2Stock Level:2$50.00 (RRP)Add To Cart