Halo DJD Bush Drive Cog Removal tool
Description
If stubborn spockets mean that the DJD driver cannot be adequately held then this Workshop tool may be required.
CNC Made from steel.
Use as follows:
- Insert the tool securely into a bench vice.
- Remove the driver body from the hub assembly.
- Remove the 3 Pawls and spring.
- Insert the Pawl area of the driver body into the Bench tool.
- Use required chainwhip to remove the now securely held DJD driver body.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:PSTL-TL1303
Thru-axle hubs just don't fit in the truing stand. Our adapters fit into common thru-axle sizes so you can true them up just like a wheel with a standard hub axle. We've also included o-rings so that the thru-axle caps are guided into the hub for a solid fit and stay secure when you remove the wheel to check your dish and stress-relieve the spokes.
- For9/15/20mm axles (pair)
- Developed in cooperation with Handspun Wheels (www.handspunwheels.com)
- Grooved with rubber o-rings
- CNC-machined AL-6061-T6$86.97 (RRP)POA -
Stock Code:CKTL-THB002Stock Code:CKTL-THB020Stock Code:CKTL-THB006Stock Code:CKTL-THB100Stock Code:CKTL-THB007$50.00 (RRP)$46.13 (RRP)POA$370.00 (RRP)POA
-
Stock Code:WMTL-BP0005
Essential Bearing Press for installation of bearings with a minimum inner diameter of 10mm For use with 3/8" Press Rod and handles.
Includes:
- QTY 1 3/8 ACME THREADED ROD
- QTY 2 FAME LINKAGE STANDOFF 30mm QTY
- 2 THREADED HANDLE$135.00 (RRP)Add To Cart
-
Stock Code:HLTL-HUHADBST
If stubborn spockets mean that the DJD driver cannot be adequately held then this Workshop tool may be required.
CNC Made from steel.
Use as follows:
- Insert the tool securely into a bench vice.
- Remove the driver body from the hub assembly.
- Remove the 3 Pawls and spring.
- Insert the Pawl area of the driver body into the Bench tool.
- Use required chainwhip to remove the now securely held DJD driver body.$75.00 (RRP)Add To Cart
-
Stock Code:WMTL-GXP22-EXTStock Code:WMTL-BE-22MM-SETStock Code:WMTL-BE-24MM-SETStock Code:WMTL-24X37-EXTStock Code:WMTL-BE-25MM-SETStock Code:WMTL-29MM-EXTStock Code:WMTL-BE-29MM-SETStock Code:WMTL-BE-30MM-SETStock Code:WMTL-608-EXTStock Code:WMTL-609-EXTStock Code:WMTL-6000-EXTStock Code:WMTL-6001-EXTStock Code:WMTL-6002-EXTStock Code:WMTL-6003-EXTStock Code:WMTL-6804-EXTStock Code:WMTL-6805-EXTStock Code:WMTL-6806-EXTStock Code:WMTL-EX0001Stock Code:WMTL-EX0002Stock Code:WMTL-EX0003Stock Code:WMTL-BE-PUSHERStock Code:WMTL-PUSHERStock Code:WMTL-R6-EXT
6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor
Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings
6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing
Tap the extractor out with a punch$49.00 (RRP)$65.00 (RRP)$65.00 (RRP)$75.00 (RRP)$65.00 (RRP)$72.00 (RRP)$65.00 (RRP)$65.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$74.00 (RRP)$74.00 (RRP)$74.00 (RRP)$239.00 (RRP)$239.00 (RRP)$255.00 (RRP)$26.00 (RRP)$19.00 (RRP)$75.00 (RRP)
