SEIDO Stage Rack Front Rack
Description
Strong and sturdy front rack to haul the occasional luggage in the streets or to support randonneur bags while touring.
MATERIAL: ALUMINUM
DIMENSIONS: 246 x 332 mm
STRUT LENGTH: 240 mm
MOUNTING STYLE: FORK CROWN / MID-BLADE FORK MOUNTS
MAX. LOAD: 8 Kg
WEIGHT: 654 g
Webshops and Bike shops
You may also be interested in...
-
Stock Code:SLRK-RK0102Stock Code:SLRK-RK0103
The rear Rack is also height-adjustable, enabling it to fit a wide variety wheel sizes while allowing you to move its center of gravity as low as possible for a more stable ride. Its wide platform has plenty of room for rack trunks, sleeping bags, tents, boxes of lima beans, or small cages full of hamsters. The stainless steel hardware we provide will enable you to fit them to most rigid 26" and 700c frames, and to forks equipped with drum, caliper, or cantilever brakes. Disc brakes and suspension are generally not compatible with our rear Racks, though there is an increasing number of frames designed to allow the use of racks and disc brakes.
Our rear rack will fit on a Pugsley/Moonlander, though it will sit slightly off-center due to the frame's offset design , and it sits a bit higher than normal since the mounts are part of the way up the seat stays rather than right at the dropouts like usual (this is to allow disc brake clearance). This is not something that will greatly affect the performance of the rack, but if you notice it try playing around with how you have your weight distributed on the rack until it feels "normal".
Rear rack WILL work with disc brakes on our Troll, Ogre, ECR, and Disc Trucker framePOAPOA -
Stock Code:SLXT-RK0124
The Surly Whip Lash is designed for attaching bags, bivvies, and other sundries to your bicycle frame. Its trimmable design features nylon construction and a hook-and-loop style closure.
- For general tie-down use
- Rubberized side securely grips bike frames and racks
- Includes two 550mm lashes and one 695mm lashPOA -
Stock Code:SMRK185710
Front mini rack with a host of braze-ons for your gadgets. This one has wider-set stays to fit gravel forks like the Enve Adventure series.
Extra long tang is bent for mounting to caliper brake bolt.
P-Clamps and other hardware included.
If installing to a braze-on, the braze-on need to be about 140mm from the brake hole on the crown. If your braze-on is too low, you will need to install using P-clamps on the legs.POA -
Stock Code:BTRK-4055822521468
Strong and sturdy front rack to haul the occasional luggage in the streets or to support randonneur bags while touring.
MATERIAL: ALUMINUM
DIMENSIONS: 246 x 332 mm
STRUT LENGTH: 240 mm
MOUNTING STYLE: FORK CROWN / MID-BLADE FORK MOUNTS
MAX. LOAD: 8 Kg
WEIGHT: 654 g$202.00 (RRP) -
Stock Code:JRRK-STFB-X1
Our 20mm webbing straps are woven from 100% pre consumer recycled nylon and have a simple built in anchor so when you are tightening your load down it doesn't slip around.
Each strap is 1.4m long and come in pairs. They are compatible with every lug point on JACK.$30.00 (RRP)Add To Cart
