WHEELS MFG REAR THROUGH AXLE

Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
 
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
 
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.

Product features:

- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles

Tech Specs:

- Material: 7075 aluminum
- Hard anodized
- Diameter: 12mm 
- Torque Spec: 12 Nm max
- Tool Interface: 5mm hex key
- Made in the USA

Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
 
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
 
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.

Product features:

- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles

Tech Specs:

- Material: 7075 aluminum
- Hard anodized
- Diameter: 12mm 
- Torque Spec: 12 Nm max
- Tool Interface: 5mm hex key
- Made in the USA

Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
 
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
 
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.

Product features:

- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles

Tech Specs:

- Material: 7075 aluminum
- Hard anodized
- Diameter: 12mm 
- Torque Spec: 12 Nm max
- Tool Interface: 5mm hex key
- Made in the USA

Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
 
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
 
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.

Product features:

- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles

Tech Specs:

- Material: 7075 aluminum
- Hard anodized
- Diameter: 12mm 
- Torque Spec: 12 Nm max
- Tool Interface: 5mm hex key
- Made in the USA

Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
 
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
 
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.

Product features:

- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles

Tech Specs:

- Material: 7075 aluminum
- Hard anodized
- Diameter: 12mm 
- Torque Spec: 12 Nm max
- Tool Interface: 5mm hex key
- Made in the USA

Rear Thru Axle 12mm x 174 Length x 1.0 Thread Pitch - Conical Washer

Thru-axles engineered for a better ride!

Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.

There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.

Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.

Product features:

Designed, machined and tested in Colorado, USA.
5mm hex on both ends of the axle for easy installation and removal.
Hard anodized finish for extra durability.
Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
Axle length is compatible +/- 2mm
Replacement for OEM thru-axles

Tech Specs:

Material: 7075 aluminum
Hard anodized
Diameter: 12mm
Torque Spec: 12 Nm max
Tool Interface: 5mm hex key
Made in the USA

Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
 
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
 
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.

Product features:

- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles

Tech Specs:

- Material: 7075 aluminum
- Hard anodized
- Diameter: 12mm 
- Torque Spec: 12 Nm max
- Tool Interface: 5mm hex key
- Made in the USA

Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
 
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
 
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.

Product features:

- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles

Tech Specs:

- Material: 7075 aluminum
- Hard anodized
- Diameter: 12mm 
- Torque Spec: 12 Nm max
- Tool Interface: 5mm hex key
- Made in the USA

Rear Thru Axle 12mm x 185 Length x 1.0 Thread Pitch - Flat Washer

Thru-axles engineered for a better ride!

Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.

There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.

Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.

Product features:

Designed, machined and tested in Colorado, USA.
5mm hex on both ends of the axle for easy installation and removal.
Hard anodized finish for extra durability.
Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
Axle length is compatible +/- 2mm
Replacement for OEM thru-axles

Tech Specs:

Material: 7075 aluminum
Hard anodized
Diameter: 12mm
Torque Spec: 12 Nm max
Tool Interface: 5mm hex key
Made in the USA

Rear Thru Axle 12mm x 194 Length x 1.0 Thread Pitch - Flat Washer

Thru-axles engineered for a better ride!

Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.

There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.

Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.

Product features:

Designed, machined and tested in Colorado, USA.
5mm hex on both ends of the axle for easy installation and removal.
Hard anodized finish for extra durability.
Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
Axle length is compatible +/- 2mm
Replacement for OEM thru-axles

Tech Specs:

Material: 7075 aluminum
Hard anodized
Diameter: 12mm
Torque Spec: 12 Nm max
Tool Interface: 5mm hex key
Made in the USA

Rear Thru Axle 12mm x 218 Length x 1.0 Thread Pitch - Conical Washer

Thru-axles engineered for a better ride!

Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.

There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.

Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.

Download our thru-axle identification guide to determine which thru-axle your bike requires.

Personalize and protect your bike with Thru-Axle Caps!



Product features:

Designed, machined and tested in Colorado, USA.
5mm hex on both ends of the axle for easy installation and removal.
Hard anodized finish for extra durability.
Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
Axle length is compatible +/- 2mm
Replacement for OEM thru-axles

Tech Specs:

Material: 7075 aluminum
Hard anodized
Diameter: 12mm
Torque Spec: 12 Nm max
Tool Interface: 5mm hex key
Made in the USA

Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
 
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
 
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.

Product features:

- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles

Tech Specs:

- Material: 7075 aluminum
- Hard anodized
- Diameter: 12mm 
- Torque Spec: 12 Nm max
- Tool Interface: 5mm hex key
- Made in the USA

Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
 
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
 
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.

Product features:

- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles

Tech Specs:

- Material: 7075 aluminum
- Hard anodized
- Diameter: 12mm 
- Torque Spec: 12 Nm max
- Tool Interface: 5mm hex key
- Made in the USA

Rear Thru Axle 12mm x 229 Length x 1.5 Thread Pitch - Flat Washer

Thru-axles engineered for a better ride!

Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.

There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.

Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.

Download our thru-axle identification guide to determine which thru-axle your bike requires.

Personalize and protect your bike with Thru-Axle Caps!



Product features:

Designed, machined and tested in Colorado, USA.
5mm hex on both ends of the axle for easy installation and removal.
Hard anodized finish for extra durability.
Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
Axle length is compatible +/- 2mm
Replacement for OEM thru-axles

Tech Specs:

Material: 7075 aluminum
Hard anodized
Diameter: 12mm
Torque Spec: 12 Nm max
Tool Interface: 5mm hex key
Made in the USA

Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
 
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
 
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.

Product features:

- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles

Tech Specs:

- Material: 7075 aluminum
- Hard anodized
- Diameter: 12mm 
- Torque Spec: 12 Nm max
- Tool Interface: 5mm hex key
- Made in the USA

Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
 
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
 
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.

Product features:

- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles

Tech Specs:

- Material: 7075 aluminum
- Hard anodized
- Diameter: 12mm 
- Torque Spec: 12 Nm max
- Tool Interface: 5mm hex key
- Made in the USA

Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
 
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
 
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.

Product features:

- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles

Tech Specs:

- Material: 7075 aluminum
- Hard anodized
- Diameter: 12mm 
- Torque Spec: 12 Nm max
- Tool Interface: 5mm hex key
- Made in the USA

Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
 
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
 
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.

Product features:

- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles

Tech Specs:

- Material: 7075 aluminum
- Hard anodized
- Diameter: 12mm 
- Torque Spec: 12 Nm max
- Tool Interface: 5mm hex key
- Made in the USA

Rear Thru Axle 12mm x 199 Length x 1.75 Thread Pitch - Flat Washer

Thru-axles engineered for a better ride!

Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.

There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.

Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.

Product features:

Designed, machined and tested in Colorado, USA.
5mm hex on both ends of the axle for easy installation and removal.
Hard anodized finish for extra durability.
Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
Axle length is compatible +/- 2mm
Replacement for OEM thru-axles

Tech Specs:

Material: 7075 aluminum
Hard anodized
Diameter: 12mm
Torque Spec: 12 Nm max
Tool Interface: 5mm hex key
Made in the USA