CHRIS KING HUB TOOLS
Chris King Hub Cone Adjust tool
Chris King Large Split Ring tool for 20mm Hubs
Split ring for the THB001 Hub Service Tool which is compatible with all Chris King hubs except the R45.
This anodized red large Split Ring replaces the pewter large Split Ring. It allows users to remove the bearings in the Chris King LD (15mmLD and 20mm) front hubs.
This is a small part of the THB001 Hub Service Tool which is compatible with all Chris King® hubs except the R45, 15mmLD, 20mm and 24mm.
The Chris King Universal Hub Tool is a high quality shop tool designed to completely disassemble and reassemble Chris King R45D, R45, Boost CL, Superboost, ISO, Classic, and BMX hubs. Though not required for basic adjustment or routine hub maintenance, it makes a striking addition to your tool set, allowing professional and home mechanics to perform complete hub overhauls and bearing service. A hub cone adjusting tool and comprehensive technical manual are included in the complete kit.
- Engineered, manufactured and assembled in Portland, Oregon USA
- Made from USA sourced high quality aluminum and heat treated stainless steel
- Anodized finish
Chris King Small Split Ring (for the THB001 Hub Service Tool Kit)- THB007
Webshops and Bike shops
Related Products
-
Description
Wheels MFG Drop-out savers <7mm narrow 2 per
Dropout savers are designed to replace damaged threads in rear derailleur mounts.
Made from aircraft quality steel, dropout savers provide an economical and reliable alternative to the "major surgery" of replacing a complete dropout
• Wide Dropout Saver fits dropouts 7mm or more in thickness
• Narrow Dropout Saver fits dropouts 7mm or less in thickness
• 2 pieces -
Description
Our 6803 over axle adapter is used to press 6803 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6803 bearing
Outer Diameter: 25.8mm
Thickness: 20mm
Thru Hole Diameter: 17.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations) -
Description
Our 6900 over axle adapter is used to press 6900 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6900 bearing
Outer Diameter: 21.8mm
Thickness: 40mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations) -
Description
The Blackbearing case allows the mounting of the following bearings:
6700-2RS
688-2RS / 6800-2RS / 698-2RS / 63800-2RS / 688-2RS-E / DR-6700-2RS
608-2RS / 6801-2RS / 6001-2RS / 6902-2RS / 6702-2RS / 7801-2RS / 16100-2RS / 7902-2RS / MR-17287-2RS
MR-17286-2RS / 16001-2RS / MR-16287-2RS / MR-17289-2RS / MR-19285-2RS / 7001-2RS / 6902-2RS-E / 3001-2RS
6802-2RS / 6901-2RS / 628-2RS / 6200-2RS / 6903-2RS / 609-2RS / 7901-2RS / 3802-2RS / 63802-2RS / 7903-2RS
MR-18307-2RS / 3903-2RS
6000-2RS / 6803-2RS / 6201-2RS / 6002-2RS / 6804-2RS / 629-2RS / 63803-2RS / MR-15267-2RS / MR-12268-2RS
DR-1526-2RS / 16002-2RS / 7805-2RS / 3002-2RS / 3804-2RS
608-2RS / 6900-2RS / 6805-2RS / 6904-2RS / MR-2437-2RS / 608/9-2RS / 608-2RS-E / MR24077-2RS / MR-275377
