Thomson Titanium RiserBar780mmx15mm Rise
Description
Titanium gives you a ride quality unavailable in other materials. Thomson manufacturing gives you light weight and no shims at the stem clamp. Two sweeps are available in the flat bar design and a riser bar is also available.
15mm Riser 8° Back 4° Up 31.8mm 780mm
345 grams
Webshops and Bike shops
You may also be interested in...
-
Stock Code:SLHB-HB1114Stock Code:SLHB-HB1112
The Open bar is an upright bar but not an uptight bar. It’s equally suited to cruising, commuting, and even some singletrack, though it should be noted that this is not by any means a DH bar. We left it a bit flexy to take some of the harsh out of your ride. The angle makes it comfy for your wrists. The width enables loads of control. It’s got plenty of room for grips, shifters and brake levers. Knurled clamp area. 4130 CroMoly steel.
Clamp diameter: 25.4mm
Width: 666mm
Rise: 40mm
Sweep Angle: 53 degrees
Color: E.D. coated Black.POAPOA -
Stock Code:TNHB-HB-E130Stock Code:TNHB-HB-E131
Our aluminum drop bars bring the performance, and dependability you have come to expect from Thomson. The lineup is available in 3 profiles, and varying widths. Each made from 7000 series aluminum. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.
Our road bar wing section is small enough not to restrict hand movements when riding on the top, and allows bar angle adjustment without “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.
The Dirt drop is available in 44cm, and 46cm, a wide drop bar with 25° flare, 130mm REACH.
Ready for your next adventure, regardless of the road you choose.$220.00 (RRP)$220.00 (RRP) -
Stock Code:WSHB-HB2616
The No.9 Mountain carbon handlebar features full unidirectional carbon construction. At 800mm wide, this bar allows for a custom fit.
- Matte unidirectional carbon construction
- Trimmable ends, made easy with graphic markings
- No rider weight limit
- ASTM Condition 3 - For rough off-road riding and jumps less than 24"
- 31.8mm clamp, no rise or upsweepPOA -
Stock Code:SLHB-HB0453
We set out to make a handlebar that’s upright, durable, and capable of resurrecting a parts-bin bike or transforming a newer slice of steel into something more. What we came up with is the Sunset Bar. We liken it to its sibling, the Sunrise Bar, with BMX-inspired style and vertical posture. Procure one yourself for a fresh take on front end grip.
- Constructed with 4130 Chromoly Custom-Butted Steel tubing for enhanced strength and comfort, and finished in an anti-rust Black ED coat for longevity
- Brings comfort, style, and durability by fitting a more upright position with 110mm of rise, 22-degree backsweep, and 14-degree upsweep
- Adds height to frames with short steerer tubes or headtubes
- Tested to comply with ASTM 3 and ISO Mountain Standards for rowdy trail riding and beyond$145.00 (RRP)POA -
Stock Code:SMHB27098
Here is your alternative to "alternative drop bars". It's wide and takes MTB grips as well as bar tape. The grip area is long; long enough to run grip shifters (including Rohloff) and flat bar levers. But the Gator will also take aero levers just like the Junebug. Try it bikecamping, offroading, or touring.
- 6061 butted aluminum
- Width: 655mm at ends, center-to-center
- Width: 505mm at front of drops, center-to-center
- Width of flats on top: 340mm
- Center: 31.8mm
- Drops flare out at 20° angle
- Drops are 190mm long and have an OD of 22.2 (i.e. they can take flat bar grips)
- Reach: 65mm / Drop: 112-160mm
(Reach and drop is relative to the angle you install these bars at. On these types of bars, you want to angle the drops down, not have them parallel to the ground as with road bars)
- Weight: 400g
- No cable grooves
- Shotpeen finish$143.33 (RRP)
