BlackBearing B5 386EVO 29mm DUB
Description
The Blackbearing bottom bracket range has been specifically developed to withstand the most extreme conditions.
The BBlock technology (built in 2 threadable parts) allows a better alignment of the casing in its assembly offering several advantages:
- minimizes possible cracks
- greater protection to the bearing extending its useful life
- an easier replacement of the bearing.
CNC machined aluminum.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMBB-PF30-THD-AC
New PF30 bottom bracket with threaded cups. Don't rely on questionable frame tolerances. Our threaded cups ensure a tight, noise-free bottom bracket with proper bearing alignment.
In Angular Contact (A/C) bearings, ALL balls are engaged and spread the force over a larger surface area, to decrease friction and minimize wear.
Direct replacement for SRAM, FSA, and other PressFit 30 bottom brackets!
Made in the USA
Anodized black, machined aluminum shell
6806 (30mm ID) Enduro Angular Contact bearings
Dual silicone seals keep the contamination out for longer life
Adaptable BB to fit PressFit 30 specific frames (46mm ID) with shell widths from 61mm to 86.5mm
Will accept current 30mm spindle cranksets, as well as 24mm and 24/22mm cranksets using Wheels Mfg. adapter shims
Note: Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29).$258.00 (RRP)Add To Cart
-
Stock Code:WMBB-T47-OUT-30MM-BB
T47 threaded BB cups for T47 frames and 30mm spindle diameter cranks. Cups have outboard bearings, and can be used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle.
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.
Bottom Bracket Includes:
BB Cups with bearings
2 - Silicone dust seals
2 - 0.5mm crank spindle spacers
2 - 1.0mm crank spindle spacers
Bearings: Enduro ABEC-3
Bottom Bracket/Frame Interface: T47
Bottom Bracket Shell Width (mm): 68mm - 100mm
Bottom Bracket Shell I.D.: 47x1.0mm Threaded
Crank Spindle Diameter: 30mm
Over Bearing Width: 90.8mm in 68mm wide shell*
Tool Pattern: 48.5mm x 16-notch$227.00 (RRP)Add To Cart
-
Stock Code:WMBB-BB30-EBB-GXP-BK
New Eccentric bottom bracket for use in BB30 frames. Convert your BB30 frame to a single-speed setup with our simple to use bottom bracket.
Compatible with 24/22mm (SRAM, Truvativ, Etc.) cranks. Enduro Angular Contact sealed bearings. Double lip seals on all bearings with high fill rate top quality grease for maximum durability. Machined aluminum is superior in function and durability to plastic. Fully serviceable.
- Enduro ABEC-5 Angular Contact sealed bearings
- Fits BB30 bottom bracket shell widths from 68mm to 73mm
- Use with 24/22mm (SRAM, Truvativ, Etc.) cranks
**IMPORTANT NOTE: Our Eccentric bottom brackets for BB30 frames will not work with frames that do not have removable c-clips in the shell. If your frame has a shell with a molded step that the bearings press up against, our EBB will not completely fit in to the shell.$279.00 (RRP)Add To Cart
-
Stock Code:BBBB-BB90/95-24-C$117.33 (RRP)
Add To Cart
