BlackBearing B5 386EVO 28mm Praxis
Description
The Blackbearing bottom bracket range has been specifically developed to withstand the most extreme conditions.
The BBlock technology (built in 2 threadable parts) allows a better alignment of the casing in its assembly offering several advantages:
- minimizes possible cracks
- greater protection to the bearing extending its useful life
- an easier replacement of the bearing.
CNC machined aluminum.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:CKBB-PBB023Stock Code:CKBB-PBB024
Fits:
• Press Fit 30 BB Shells
• 73mm Wide BB Shells
• 24mm>22mm Mountain Cranksets
• Common Cranks*: SRAM mtn, Zinn mtn, Bontrager mtn, TruVativ mtn$48.28 (RRP)$54.08 (RRP) -
Stock Code:WMBB-T47-OUT-29MM
T47 threaded BB cups for T47 frames and 29mm spindle diameter SRAM DUB compatible cranks. Cups have outboard bearings, and can be used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle.
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.
Bottom Bracket Includes:
BB Cups with bearings
2 - Silicone dust seals
2 - 0.5mm crank spindle spacers
2 - 1.0mm crank spindle spacers
1 - 2.5mm crank spindle spacer
Bearings: Enduro ABEC-3
Bottom Bracket Shell Width (mm): 68mm - 100mm
Bottom Bracket Shell I.D.: 47x1.0mm Threaded
Crank Spindle Diameter: 29mm
Tool Pattern: 48.5mm x 16-notch$227.00 (RRP)Add To Cart
-
Stock Code:CKBB-PBB078
For DUB mountain cranks there are a few extra fitments notes to be aware of.
If you have a 68mm BB shell and a T47 bottom bracket you will need two of these 2.5mm Cup Spacers. SOLD INDIVIDUAL.$24.50 (RRP)Add To Cart
-
Stock Code:BTBB-4055822522106
Seido T47 BBs are machined to precision with the highest quality aluminium and bearings. They will fit 30mm spindle cranks with the included washers, or can be fitted with our adaptor kits to accept other sizes as well.
The internal provides room for internal cable routing. Servicing or replacing bearings is an easy job thanks to a great accessibilty of the bearing races, even when still fitted inside the frame. Outer seals provide extra protection for the already double-sealed bearings.
Uses 2x 6808 bearings (30x40x7mm, ID x OD x t).
SUITABLE BB SHELL WIDTH
86.5mm - 92mm
Includes 2 x 1.5 mm, 4 x 1 mm, 1x wave washer Removable Nylon Sleeve Adaptable to 24 and 24 / 22 mm with our spindle adapters$120.00 (RRP) -
Stock Code:WMBB-ITA-24MM
Italian threaded road bottom bracket for 70mm shells. We use only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable.
Includes:
(2) - Enduro Silicone dust seals
(1) - 2.5mm aluminum BB cup spacer
(2) - 0.5mm crank spindle spacers
(2) - 1.0mm crank spindle spacers
Direct replacement for Shimano HollowTech II bottom brackets!$184.00 (RRP)Add To Cart
