Blackbearing ForkSeal Fitting Tool 35/36
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-6000OA-6Stock Code:WMTL-6001OA-7Stock Code:WMTL-6002OA-7Stock Code:WMTL-6003OA-7Stock Code:WMTL-6802OA-20Stock Code:WMTL-6803OA-20Stock Code:WMTL-6804OA-20Stock Code:WMTL-6900OA-40Stock Code:WMTL-6901OA-2Stock Code:WMTL-6901OA-40Stock Code:WMTL-6902OA-7Stock Code:WMTL-6903OA-7Stock Code:WMTL-6904OA-7
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP) -
Stock Code:WMTL-GXP22-EXTStock Code:WMTL-BE-22MM-SETStock Code:WMTL-BE-24MM-SETStock Code:WMTL-24X37-EXTStock Code:WMTL-BE-25MM-SETStock Code:WMTL-29MM-EXTStock Code:WMTL-BE-29MM-SETStock Code:WMTL-BE-30MM-SETStock Code:WMTL-608-EXTStock Code:WMTL-609-EXTStock Code:WMTL-6000-EXTStock Code:WMTL-6001-EXTStock Code:WMTL-6002-EXTStock Code:WMTL-6003-EXTStock Code:WMTL-6804-EXTStock Code:WMTL-6805-EXTStock Code:WMTL-6806-EXTStock Code:WMTL-EX0001Stock Code:WMTL-EX0002Stock Code:WMTL-EX0003Stock Code:WMTL-BE-PUSHERStock Code:WMTL-PUSHERStock Code:WMTL-R6-EXT
6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor
Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings
6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing
Tap the extractor out with a punch$49.00 (RRP)$65.00 (RRP)$65.00 (RRP)$75.00 (RRP)$65.00 (RRP)$72.00 (RRP)$65.00 (RRP)$65.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$74.00 (RRP)$74.00 (RRP)$74.00 (RRP)$239.00 (RRP)$239.00 (RRP)$255.00 (RRP)$26.00 (RRP)$19.00 (RRP)$75.00 (RRP) -
Stock Code:WMTL-ST0010Stock Code:WMTL-ST0009Stock Code:WMTL-ST0008
Precision machined anodized aluminum clamps designed to allow for easy and secure clamping of round suspension components during service. Designed with strong magnet inserts to keep the shaft clamps securely in place when used with a vice clamp.
Includes 1 pairs of of shaft clamps to fit shaft diameters:
8mm
9mm
10mm
12.7mm
15mm
15.9mm
16.7mm$160.00 (RRP)$160.00 (RRP)$160.00 (RRP) -
Stock Code:WMTL-BP0001
Gone are the days when shop mechanics grabbed whatever socket was close enough to the sealed bearing size and just tapped it in. The Bearing Press Pro Kit replaces that archaic installation system, providing the right tool for the job.
The Bearing Press Pro Kit installs 14 bearing sizes including today's most common bottom bracket and thru axle bearings. The kit also includes linkage offsets for full suspension bearing installation and 7 speed spacers for faster installs. All parts are laser etched for easy identification.
PRESS-1 includes:
(2) T-Handles with 3/8" Acme threaded rod
(2) 15mm x 25mm Speed Spacer
15mm x 35mm Speed Spacer
17mm x 25mm Speed Spacer
17mm x 35mm Speed Spacer
20mm x 25mm Speed Spacer
20mm x 35mm Speed Spacer
(2) 30mm Speed Spacer
(2) 20mm frame linkage standoffs
(2) 30mm frame linkage standoffs
Open Bore Drifts for the following bearing sizes:
(2) 6802
(2) 6803
(2) 6804
(2) 6901
(2) 6902
(2) 6903
(2) 15x26
(2) 27.7x37
Over Axle Drifts for the following bearing sizes:
(2) 6802x20mm
(2) 6803x20mm
(2) 6804x20mm
(2) 6901x40mm
(2) 6902x7mm
(2) 6903x7mm$445.00 (RRP)Add To Cart
-
Stock Code:JLTL-0210
The Dirty Little Scrubber goes heavy on clean chains and crisp shifts and light on mess, spills and faff. Slap it on your chain whenever you wash your whip and watch your drivetrain transform from ghastly to glorious in a few spins of the cranks.
Best paired with our Dirt Juice Boss Chain Cleaner liquid, this dirty duo will strip your chain of grease and grime in seconds, ready for a quick rinse and a fresh coat of lube.
Please note: The Dirty Little Scrubber is not compatible with wide track or BMX type chains.
Quick and easy to use no hands chain cleaner.
The Dirty Little Scrubber hangs on the lower chain and a hook bar swings up behind the jockey wheel so when you back pedal the cranks, the cleaner stays in place. The fact that you dont have to hold the cleaner with one hand brings 3 main advantages
1) It finds its own position of least resistance, so you dont get annoying chain suck when back pedalling the cranks - this is assuming that you have it in a gear that backpedals freely in the first place!? With hand held cleaners, it is all too easy to twist or tilt the cleaner which inhibits the free movement of the chain through the cleaner.
2) You can use one hand to the hold the bike up and the other hand to turn the crank, so you dont need a workstand to hold the bike steady
3) Because it is easier and more convenient to use, you are more likely to clean your chain more regularly which will increase the lifespan of your drive train and keep it operating more smoothly which makes your riding more enjoyable!!$26.00 (RRP)Add To Cart
