Blackbearing Press2
Description
The Blackbearing case allows the mounting of the following bearings:
6700-2RS
688-2RS / 6800-2RS / 698-2RS / 63800-2RS / 688-2RS-E / DR-6700-2RS
608-2RS / 6801-2RS / 6001-2RS / 6902-2RS / 6702-2RS / 7801-2RS / 16100-2RS / 7902-2RS / MR-17287-2RS
MR-17286-2RS / 16001-2RS / MR-16287-2RS / MR-17289-2RS / MR-19285-2RS / 7001-2RS / 6902-2RS-E / 3001-2RS
6802-2RS / 6901-2RS / 628-2RS / 6200-2RS / 6903-2RS / 609-2RS / 7901-2RS / 3802-2RS / 63802-2RS / 7903-2RS
MR-18307-2RS / 3903-2RS
6000-2RS / 6803-2RS / 6201-2RS / 6002-2RS / 6804-2RS / 629-2RS / 63803-2RS / MR-15267-2RS / MR-12268-2RS
DR-1526-2RS / 16002-2RS / 7805-2RS / 3002-2RS / 3804-2RS
608-2RS / 6900-2RS / 6805-2RS / 6904-2RS / MR-2437-2RS / 608/9-2RS / 608-2RS-E / MR24077-2RS / MR-275377
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)Stock Level:In StockStock Level:In StockStock Level:1Stock Level:1Stock Level:1Stock Level:In StockStock Level:In StockStock Level:In StockStock Level:Out of StockStock Level:1Stock Level:Out of StockStock Level:2Stock Level:1Stock Level:1Stock Level:Out of StockStock Level:In StockStock Level:In StockStock Level:In StockStock Level:In StockStock Level:Out of StockStock Level:Out of StockExpected Date:20 January 2025Expected Date:20 January 2025Expected Date:20 January 2025Expected Date:20 January 2025$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:WMTL-6000OA-6Stock Code:WMTL-6001OA-7Stock Code:WMTL-6002OA-7Stock Code:WMTL-6003OA-7Stock Code:WMTL-6802OA-20Stock Code:WMTL-6803OA-20Stock Code:WMTL-6804OA-20Stock Code:WMTL-6900OA-40Stock Code:WMTL-6901OA-2Stock Code:WMTL-6901OA-40Stock Code:WMTL-6902OA-7Stock Code:WMTL-6903OA-7Stock Code:WMTL-6904OA-7
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)Stock Level:In StockStock Level:1Stock Level:Out of StockStock Level:Out of StockStock Level:2Stock Level:2Stock Level:2Stock Level:1Stock Level:2Stock Level:1Stock Level:2Stock Level:Out of StockStock Level:In StockStock Level:2Expected Date:20 January 2025Expected Date:20 January 2025Expected Date:20 January 2025$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP) -
Stock Code:WTTLFWI-CISStock Code:WTTLFWI-H16Stock Code:WTTLFWI-H8Stock Code:WTTLFWI-KIT-01Stock Code:WTTLFWI-LRStock Code:WTTLFWI-S20Stock Code:WTTLPACKWRENCH
Ultralight Cinch and ISIS Spline Wrench Insert - older ISIS bottom brackets or the Race Face Cinch direct mount chainring system.
Steel hex wrench inserts were designed to pair with the Pack Wrench - Ultralight 1 Inch Hex and Bottom Bracket Wrench.
- The aluminum wrench (sold separately) has magnets that hold the inserts in place
- Made in the USA and CNC machined from hardened steel with electroless nickel plating
- Inserts each sold separately
We travel a lot with our bikes and are always looking for the leanest way to have everything we need to build or service a bike without packing 50 lbs of tools. To help with this we developed some very specific Pack Tools that are high quality but weight conscious for those that do mobile wrenching, travel with their bike, or just want one set of tools that can be thrown in when heading to the trail. While the Pack Wrench is lightweight, we wouldn't necessarily call the inserts lightweight. We made the inserts out of steel for extra strength and durability.Stock Level:In StockStock Level:1Stock Level:Out of StockStock Level:Out of StockStock Level:Out of StockStock Level:In StockStock Level:Out of StockStock Level:In Stock$38.00 (RRP)$47.00 (RRP)$47.00 (RRP)$219.00 (RRP)$38.00 (RRP)$38.00 (RRP)$85.00 (RRP) -
Stock Code:WMTL-XTR-CAP-DRIVER
The XTR Cap Driver is used for removing and installing the fixing bolt cap on XTR M9100 series crankarms. Designed to be used with a 3/8” drive socket or torque wrench for easy installation and removal.
Stock Level:Out Of StockStock Level:Out of StockExpected Date:20 January 2025$30.00 (RRP) -
Stock Code:WMTL-6901OB-2
Our 6901 open bore adapter is used to press 6901 sealed bearings. The adapter is machined with one step at 11.9mm OD, which fits into the center of the sealed bearing.
Installs: 6901 bearing
Inner Step Outer Diameter: 11.9mm
Outer Diameter: 23.8mm
Thickness: 5.9mm
Thru Hole Diameter: 5.2mm
Inner hole sized to fit quick release skewer or M5 bolt
Compatible with PRESS-2
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)Stock Level:In StockStock Level:In Stock$18.00 (RRP)Add To Cart