- Home /
- Components /
- Bottom Bracket /
- BlackBearing B5 PF30 25mm Campagnolo
BlackBearing B5 PF30 25mm Campagnolo
Description
The Blackbearing bottom bracket range has been specifically developed to withstand the most extreme conditions.
The BBlock technology (built in 2 threadable parts) allows a better alignment of the casing in its assembly offering several advantages:
- minimizes possible cracks
- greater protection to the bearing extending its useful life
- an easier replacement of the bearing.
CNC machined aluminum.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMBB-BB-0.7Stock Code:WMBB-BB-1.8Stock Code:WMBB-BB-2.5
Aluminum spacer for ISO/English or BSA threaded bottom brackets. Spacers fit between bottom bracket cup and frame. Great for fine tuning bottom bracket shells or improving chainline.
Outer Diameter: 40.7mm
Inner Diameter: 34.9mm
Thickness: 1.8mm
Machined aluminum
Anodized Black
Sold 1 spacer per bagStock Level:In StockStock Level:In StockStock Level:In StockStock Level:In Stock$13.00 (RRP)$13.00 (RRP)$13.00 (RRP) -
Stock Code:WMBB-T47-OUT-SHIM-AC
T47 threaded BB cups for T47 frames and 24mm diameter spindle cranks. Cups have outboard bearings, and are typically used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle.
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.
In Angular Contact (A/C) bearings, ALL balls are engaged and spread the force over a larger surface area, to decrease friction and minimize wear.Stock Level:Out Of StockStock Level:Out of Stock$247.00 (RRP) -
Stock Code:WMBB-BB-BSA29-BBStock Code:WMBB-BB-BSA29-BB-6Stock Code:WMBB-BB-BSA29-BB-9Stock Code:WMBB-BB-BSA29-BB-3Stock Code:WMBB-BB-BSA29-BB-4Stock Code:WMBB-BB-BSA29-BB-7Stock Code:WMBB-BB-BSA29-BB-1Stock Code:WMBB-BB-BSA29-BB-5
Run 29mm spindle SRAM DUB compatible cranks in a BSA threaded frame. Machined aluminum cups thread in to a standard threaded frame and feature Enduro 6806/29 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable.
Bottom Bracket Includes:
BB Cups with bearings
2 - Silicone dust seals
2 - 0.5mm crank spindle spacers
2 - 1.0mm crank spindle spacers
1 - 2.5mm crank spindle spacerStock Level:In StockStock Level:In StockStock Level:2Stock Level:In StockStock Level:2Stock Level:In StockStock Level:In StockStock Level:Out of StockStock Level:2$209.00 (RRP)$209.00 (RRP)$209.00 (RRP)$209.00 (RRP)$209.00 (RRP)$209.00 (RRP)$209.00 (RRP)$209.00 (RRP) -
Stock Code:CKBB-ABB1Stock Code:CKBB-ABR1Stock Code:CKBB-ABS1Stock Code:CKBB-ABBYStock Code:CKBB-ABY1Stock Code:CKBB-ABM2Stock Code:CKBB-ABZ1Stock Code:CKBB-ABT2Stock Code:CKBB-ABP1
** FIT KIT REQUIRED FOR USE **
ThreadFit 30 comes with a Center Sleeve for 73mm BB shell. For 68mm shell - sleeve is required(included in Fit Kit #2 for DUB Road cranks).
ThreadFit 30 bottom bracket is silky smooth and long-lasting thanks to legendary, angular-contact bearings. They actually get faster over time as their contact surfaces wear, because they are build to ultra-tight aerospace tolerances, using machined, Delrin-spindle sleeves to create a perfect, and precise fit between cranks and frame. That’s where the low drag and butter smooth feel come from.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Legendary made-in-house bearings
- A Fit Kit is required for use
- Uses Chris King bottom bracket cup tool for installationStock Level:2Stock Level:1Stock Level:Out of StockStock Level:Out of StockStock Level:1Stock Level:Out of StockStock Level:Out of StockStock Level:Out of StockStock Level:Out of StockStock Level:Out of Stock$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$403.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP) -
Stock Code:WMBB-BB-BSA30-BB-12
Our solution for running a 30mm spindle crankset in a BSA threaded frame. Machined aluminum cups thread in to a standard threaded frame and feature Enduro 6806 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable.
Notes:
*For use with BB30 Wide 30mm diameter cranks with a spindle length of at least 104mm (BB30 Wide, BB30a, 386EVO, Rotor 3D+, SRAM BB30 Wide).
*Will not work with standard BB30 cranksets. PLEASE MEASURE YOUR BB30 CRANK SPINDLE LENGTH!
*Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29).Stock Level:2Stock Level:2$184.00 (RRP)Add To Cart