SURLY PREAMBLE FRAMESET BLACK
Webshops and Bike shops
Related Products
-
Description
Soma Double Cross Dic 52cm Slick Black 1-1/8" Frame (Disc Compatible)
The DC has disc mounts. Ready for cross, trail-riding,commuting and loaded touring. We make it in a wide range of sizes to fit you right.
- Tange Prestige heat-treated CrMo front triangle; butted CrMo rear end
- Clearance for 700x38c tires with fenders
- Rear spacing is 132.5 and fits road or mtn hubs.
- Fork options: You can get a matching straight blade disc only fork or -if you intend to run cantilevers- a lugged crown steel fork that features eyelets for front rack and braze-ons for low-rider panniers.
- Disc mount: v.2 has disc mounts on the chainstay which allows you to put almost any rack or fender on it. Rear disc mounts fits 160mm rotors only
- 1-1/8" size headtube - w/ extra height so you use less spacers.
- 10 sizes: 42cm to 62cm
- 4.3 lbs
- Color: Slick Black
- Seatpost: 27.2mm
- Seat collar: 30.0mm -
Description
Straggler shares all of the Cross-Check's braze-ons for fenders, racks and bottle cages, and like the Cross-Check its ready to take you just about anywhere. It's a day tripper and a weekender. It's a 'rough road' road bike. It's a cyclocross bike with no pretense about racing. It's a utilitarian townie. It's a light-duty touring bike. It's an all-weather commuter. And when you get tired of one set up, you can swap parts around and turn it into something else.
- Fender eyelets at the dropouts, front and rear rack bosses and dual water bottle mounts, downtube shifter mounts
- 100% Surly proprietary 4130 chromoly tubing. ED Coated. TIG-welded. Double-butted main triangle
- Forward-exiting horizontal dropouts with adjusters give you singlespeed compatibility and wheelbase adjustability to help you fit the tires and fenders you want to run with that drivetrain you want to run. 135mm spacing
- Frame is ED Coated for increased life expectancyPOA -
Description
The Fog Cutter is an endurance road/road sport design. We designed it to fit fatter tires, but its geometry makes it handle like a road bike rather than CX or gravel bike. It can float you over chewed up asphalt better than most bikes in this category. This is the frame you want for grand fondos, long days in the saddle and the most demanding commutes.
Tange Prestige double butted CrMo steel tubing; heat treated throughout
• Road sport geometry
• Rear rack & fender mounts
• Tange Modular dropouts. Stock setup is for 142mm thru-axle hubs and flat mount disc brakes. Alternative styles available thru Tange/Long Shen.
• Fork options: Matching straight blade carbon fork (alloy steerer, flat mount, 12 x 100 thru-axle hub) or lugged CrMo steel fork (CrMo steerer, IS disc mount, QR hub)
• Tire clearance for 700c x38mm with fenders (some front derailleurs will limit tire clearance) and 650b x 42mm
• Fits 1-1/8" headset (EC34/28.6|EC34/30 headsets)
- 27.2mm post size -
Description
The original inspiration for the Wolverine was “monster cross”, but it is seriously so much more. Its geometry is stable enough for off road touring, but sporty enough for all-around adventure.
The primary differences between the version 3.0 Wolverine and the v. 4 Type-A and B is an extra set of water bottle bosses, and additional stack height on most sizes.
The Type-A ALSO adopts more modern standards such as 142mm rear thru-axle and a 44mm headtube that will fit 1-1/8 straight steerer or tapered steerer with the proper headset type. NO frame break for Belt-Drive. (See chart for other differences between A and B)
- Tange Prestige heat-treated CrMo front triangle; butted CrMo rear end
- Clearance for 700x45c tires w/ fenders
- Rear hub spacing/type: 142 x12mm Thru-Axle
- IRD Broski sliding dropouts allow for geared or single-speed builds
Optional Matching Fork: Unicrown straight blade 15mm thru-axle fork with cage bosses (1-1/8”)
No lugged crown fork offered for the Type-B
- Braze-ons for rear rack and fenders (disc brake-compatible racks only)
- Three sets of water bottle bosses
- 44mm headtube (Use ZS44/28.6-ZS44/30 headset for 1-1/8” steerers) (Use ZS44/28.6 -EC44/40 headsets for 1-1/8”-1-1/2” steerers)
- Sizes: 46, 50, 52, 54, 56, 58. 60, 62 and 66cm (We recommend 650b tires on the 46cm) -
Description
The original inspiration for the Wolverine was “monster cross”, but it is seriously so much more. Its geometry is stable enough for off road touring, but sporty enough for all-around adventure. With its sliding dropouts, you can turn it into a single-speed CX bike. With a split seatstay, it is compatible with the Gates Carbon Belt Drive.
The primary differences between the 4.0 and 4.1 is that the frame and forks now fit the flat mount brake standard.
- Tange Prestige butted and heat-treated CrMo front and rear triangle
- Clearance for 700x45c tires w/ fenders
- Rear hub spacing:135mm (10mm QR, can be upgraded to 142mm 12mm TA with different inserts )
- Gates Carbon belt drive compatible
- IRD Broski sliding dropouts allow for geared or single-speed builds
- Optional Matching Forks:
A) Lugged flat crown standard QR axle, Tange Infinity CrMo steel fork with double eyelets pannier rack and mini rack mounts.
B) Unicrown straight blade 15mm thru-axle fork w/ triple boss mounts
- Braze-ons for rear rack and fenders (disc brake-compatible racks only)
- Three sets of water bottle bosses
- 1-1/8” size headtube (34mm ID)
- Sizes: 46, 50, 52, 54, 56, 58. 60, 62 and 66cm (We recommend 650b tires on the 46cm)
- 4.79 lbs (frame);
- Paint: Lunar Rock
