Juice Lubes Chain Juice Dry 130ml bottle
Description
Juice Lube Chain Juice Dry 100ml bottle (Chain Lube)
A High-Tech And Long-Lasting Chain Lube For Dry To Damp Conditions!
Chain Juice Dry guarantees crisp and silent shifts, no sticky gunk and tough-as-nails protection for your components.
Built with an Ethanol-based carrier that’s super effective at penetrating the depths of your chain, then evaporating to leave a dry and natural wax barrier. It’s reinforced with tough, long-lasting, synthetic additives that reduce noise and wear.
It’s also kind on the environment. Dry is designed to limit droplets from flicking when you’re spinning away and is fully biodegradable to break down quickly and harmlessly.
Ideal for MTB, road, gravel, commuter bikes or anything else in between. Best applied a little in advance of riding, dry can stand up to big miles on mixed terrain..
How to Use
Un-screw nozzle and pierce security seal. Re-attach nozzle and open flow valve a small amount to avoid over application.
For top performance, chain must be thoroughly degreased (Use Dirt Juice Super Gnarl for this!) Apply a couple of layers of Chain Juice Dry , allowing 2 minutes between each layer for the lube to penetrate and “set-up” correctly. Don’t expect to see a thick oily residue on the chain – Chain Juice Dry does not work like this !
Size: 100ml
Webshops and Bike shops
You may also be interested in...
-
Stock Code:JLLU-0102
Juice Lubes Brake Mineral Oil 130ml
Juice Lubes Mineral Oil Brake Fluid is a high performance brake fluid for all Mineral Oil brake systems. It has a boiling point of 300c, which is pretty warm. So if you ever manage to cook this, then congratulations on being the first person to descend Mt Everest on a bike. In any other situation it will provide consistent and high stopping power. Obviously, other factors such a pad wear and correctly bled brakes will have a big affect on performance so always check these aswell.
DO NOT USE IN DOT OIL BRAKE SYSTEMS!!!
Always follow manufacturers instruction for the correct oil changing procedure. If you don’t feel you have the technical ability to safely carry the work out correctly, then please consult an expert. Don’t take chances with your brakes!
Size: 130ml$18.02 (RRP)Add To Cart
-
Stock Code:JLLU-0310
Juice Lubes JL69 400ml water disperent lubricant and protectant (Aerosol)
Displaces Moisture, Lubricates & Protects
Your crowbar-wielding mechanic in a can, with a biodegradable formula and super-accurate easy-spray nozzle.
JL69 is the absolute essential for driving moisture, rust and corrosion kicking and screaming out of your fancy bits before it’s too late. It’ll guarantee no more stuck threads or rusty bearings, bleeding knuckles or blowtorches.
Designed to penetrate deep into your components, it’s a must-have for general workshop jobs, a great apres-wash finishing touch and a quick fix for bikes that are put away wet.
Use it to displace water after a wash, to keep rust at bay and when things get stuck and you need a helping hand.
Our lubricating formula leaves a long lasting protective film that prevents dirt adhesion. JL69 isn't just for bikes, it works on just about anything including squeaky hinges and rusty locks.
Just don't apply it to braking surfaces, tyres or door knobs.
How to Use:
After cleaning your bike with Dirt Juice and rinsing with fresh water, Spray JL69 in to all nooks and crannies where moisture will sit and cause harm. Particular attention should be paid too rear mech, front mech, bottom bracket, suspension pivots and cables.
DO NOT SPRAY ON BRAKE PADS AND DISCS – lubrication here is not the name of the game!
In addition to bike maintenance, JL69 can be used in any situation where sitting water, corrosion and rust are undesirable.
Size: 400ml AerosolExpected Date:10 January 2025$24.98 (RRP) -
Stock Code:WTLU-WT-G-2OZ
Wolf Tooth WT-G Precision Bike Grease is a waterproof, synthetic oil-based lubricant for cyclingspecific applications. It reduces friction on moving components while protecting them from
contaminants, water, and corrosion. WT-G also prevents non-moving components from seizing together due to corrosion or galling. This is a grease that can be used on bottom brackets, hubs,headsets, general bicycle assembly, and more. WT-G Precision Bike Grease builds on the product line that was created by WT-1 Chain Lube as products that aid and enhance performance of Wolf Tooth components.
• Maintains low viscosity for consistent performance from -60ºF to 360ºF (roughly -50ºC to -180ºC)
in all conditions
• Creates smooth, easy component movement for low energy loss
• Long-lasting lubrication for extended bearing and component life
• High resistance to oxidation and corrosion
• Can be used on steel, alloy, and titanium$15.00 (RRP)Add To Cart
-
Stock Code:JLLU-0501
Juice Lubes Bearing Juice
Whack It In Thick & It Stays There!
Bearing Juice is a tough-as-nails lithium grease that’s designed specifically for bicycle use. It’s for all your bits with bearings – such as headsets, bottom brackets and hubs.
The adhesive formula has been blended specifically for the low speed applications found on bikes. When your bearings start spinning, BJ will kick in and release its magical lubricating juice to reduce friction and battle moisture, keeping your bike running sweeter for longer.
Bearing Juice is extremely resistant to water wash out, whack it in and it stays there. Purge your bearings with it and slap some on the outside of your bearing seals to prevent water from getting inside in the first place.
It's anti corrosion, it's tough against jet washing and it'll guarantee more time on the trails and less time in the workshop.
Remember, Bearing Juice is primarily for your moving parts, such as bearings. For assembly of all threaded parts we would recommend our AAS Juice aluminium anti-seize assembly paste.
How to Use
Apply as required and wipe off excess after final fitting has taken place
Size: 150ml PotExpected Date:10 January 2025$21.23 (RRP) -
Stock Code:JLLU-0401
Juice Lubes Fork Juice 400ml (Aerosol)
The Forking Good Suspension Lubricant
Fork Juice is a quick, no-mess, easy to apply and great value suspension fork lubricant that prevents wiper seal stiction, protects your fork stanchions and keeps them running super smooth. Which is exactly how you want your forks to be, right? Now, most people at the moment fall in to one of 3 camps when it comes to fork maintenance between services – they either 1) drip some chain lube on to the uppers, 2) smear some grease round them or 3) do nothing at all and say “they feel OK to me”!??. Well read on to find out why the growing number of racers, mechanics and riders using Fork Juice think that it is a better alternative to all 3 of the above.
1.Its a spray – so you get even and complete coverage quickly and easily, without getting it all over your fingers or it running down the legs.
2.It sets up dry almost immediately, unlike chain lube or a grease which are both sticky. So, when you are on a charge down your favourite trail and crap is flying everywhere, it is far less likely to stick to the stanchions and get dragged through the seals to the internals. Less muck in the internals means better performance between services. Quite simply, crud doesnt like sticking to anything that has been sprayed with Fork Juice.
3.It is superb at helping get top performance from brand new forks during the bedding in period when the seals are at their tightest. Its effects are particularly noticeable on large diameter stanchions where there is a greater contact area between the uppers and seals which makes the stiction worse. New Forks feel great straight out of the box and keep feeling great.
4.It is not carbon based, unlike PTFE (Teflon). Some forks have internals components that are coated in PTFE – if you add more PTFE to the mix in the form of a lubricant it can upset the balance and quicken the wearing out of those parts. Whether you know if your forks have any such components inside them or not, its easier to play it safe and avoid carbon based lubes.
5.It is also an excellent bike polish. As we said in point 2 – crud doesnt like sticking to anything that has been sprayed with Fork Juice – and this goes for anywhere on your bike. Spray it on the frame and you have a finish that makes it harder for dirt to stick to, which is going to make it much quicker and easier to clean post ride. Plus think of all that extra weight you wont have to carry around with you – it is possible to collect up to 5 lbs of crud sticking to your steed on a ride. Which is a bit annoying if you have spent hundreds of pounds on weight saving components. A few quid on a can of Fork Juice will help you get that bit more from your investment.
So all thats left is for you to buy some and find out for yourself how good Fork Juice is.
How To Use:
Simply spray directly on to the upper fork stanchions and rear shock shaft then cycle the unit up to 20 times. A ring of dirt will probably appear – wipe this off and continue to cycle until no more rings appear – this means your seals are now clean. Re apply a bit more and go ride!
After cleaning its worth applying a bit more as well.
Size: 400ml AerosolExpected Date:10 January 2025$24.98 (RRP)
