Juice Lubes Bearing Juice 500 ml tub
Description
Juice Lubes Bearing Juice 500ml tub Mechanic Pack (Bearing Grease)
Bearing Juice is a tough-as-nails lithium grease that’s designed specifically for bicycle use. It’s for all your bits with bearings – such as headsets, bottom brackets and hubs.
The adhesive formula has been blended specifically for the low speed applications found on bikes. When your bearings start spinning, BJ will kick in and release its magical lubricating juice to reduce friction and battle moisture, keeping your bike running sweeter for longer.
Bearing Juice is extremely resistant to water wash out, whack it in and it stays there. Purge your bearings with it and slap some on the outside of your bearing seals to prevent water from getting inside in the first place.
It's anti corrosion, it's tough against jet washing and it'll guarantee more time on the trails and less time in the workshop.
Remember, Bearing Juice is primarily for your moving parts, such as bearings. For assembly of all threaded parts we would recommend our AAS Juice aluminium anti-seize assembly paste.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:JLLU-0205
Juice Lubes Viking Juice 130ml bottle (Chain Lube)
A Tough-As-Nails Year-Round Lube For The Biggest Miles And Grimmest Trails
Designed to survive every crank of the Paris-Roubaix and crowned the “Holy Grail of Chain Lubes” by Singletrack Magazine. Viking is a tough-as-Odin’s-beard, year-round lube for use in All Conditions.
The best selling and longest lasting lube is built to pillage deep into your chain, conquering dust, rust and shady shifting. It will guarantee less workshop time, less rust, less missed shifts and a longer lasting chain.
Viking is tough and best applied well in advance of riding, the solvent based carrier dives deep into your chain before evaporating away to leave the lube deep in your rollers. The touch dry finish attracts minimal contaminants and shrugs of rain and mud.
Think of Viking as a dry lube but with the added protection of a wet lube.
It's light and runny like a fine honey mead, so go steady when applying it. If you're dribbling on the floor you've probably overdone it. Viking can be built up in layers for added or refreshed protection without becoming thick or claggy.
How To Use
Un-screw nozzle and pierce security seal. Re-attach nozzle and open flow valve a small amount to avoid over application.
For top performance, chain must be thoroughly degreased (Use Dirt Juice Super Gnarl for this!) Apply up to 4 layers of Viking Juice , allowing 2 minutes between each layer for the lube to penetrate and “set-up” correctly.
Size: 130mlExpected Date:10 January 2025$21.42 (RRP) -
Stock Code:JLLU-0300
The Scrub and Buff pack includes everything you need to get your bike cleaned, lubed, polished and ready for the trail or the road.
Scrub and Buff contains everything you need to keep your bike running beautifully for months. It’s a massive value bundle box that contains 11L of Bike Cleaner, All Conditions Chain Lube, Frame Polish and the much-loved Chain Cleaning Tool.
That’s everything you need to wash your bike and keep your drive train sparkling AND a 25% saving over buying each item individually.
Pack contains:
1 x Dirt Juice Super - Degreaser
1 x Dirt Juice - Cleaner
1 x Frame Juice Polish & Protector Spray
1 x Viking Juice Chain Lube
1 x Dirty Little Scrubber Chain Cleaner$73.76 (RRP)Add To Cart
-
Stock Code:WTLU-LUBE-WT1-2OZ
WT-1 Chain Lube is a premium synthetic chain lubricant and a drivetrain treatment for all conditions in the same bottle. It cleans and protects chains while improving overall mechanical efficiency of a drivetrain. This allows cyclists to have just WT-1 Chain Lube on hand, instead of separate dry chain lube, wet chain lube, chain cleaner, and drivetrain treatment. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes because it binds so well with chains. As a drivetrain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away, then it will protect your chain in all riding conditions and allow you to ride longer between applications.
- Cleans, lubricates, and protects chains
- Peak performance in all conditions
- Optimal choice for complex modern drivetrains
- Easy to use. Quick to apply.
- Also works on other places of your bike, including hubs, cables, and pulley wheels
APPLICATION PROCESS
Ease of use is important in selecting a chain lubricant and chain treatment. The complete application process of WT-1 Chain Lube takes less than a minute and there is no need to clean your chain before getting started.
Here’s how to begin using WT-1 Chain Lube:
1. Shake bottle of WT-1 for 30 seconds. A ball bearing is present in every bottle to help mix things up.
2. Apply one drop to each roller of your chain. We recommend applying WT-1 Chain Lube to the top side of your chain between your derailleur and chainring, just in front of that lower pulley wheel.
3. Backpedal 20-30 times. This helps WT-1 Chain Lube find its way between all the pieces of your chain.
4. Wipe chain with microfiber cloth until it appears clean with a light sheen. It'll look extra dirty at first, then it will clear up as you wipe away that dirt.
5. Ride your bike. Reapply at least once every 650km
After your first couple applications, you’ll notice that your chain looks extra dirty following your first few rides. This means that WT-1 Chain Lube is working because that detergent-like additive has made its way into the gaps and crevices of your chain and is actively pushing out dirt, grease, and debris. You’ll want to wipe down your chain after those first few rides to remove chain contaminants. As you ride more and more, you’ll see WT-1 get into its stride and your chain will be clean, silent, and efficient.$36.00 (RRP)Add To Cart
-
Stock Code:WTLU-WT-G-2OZ
Wolf Tooth WT-G Precision Bike Grease is a waterproof, synthetic oil-based lubricant for cyclingspecific applications. It reduces friction on moving components while protecting them from
contaminants, water, and corrosion. WT-G also prevents non-moving components from seizing together due to corrosion or galling. This is a grease that can be used on bottom brackets, hubs,headsets, general bicycle assembly, and more. WT-G Precision Bike Grease builds on the product line that was created by WT-1 Chain Lube as products that aid and enhance performance of Wolf Tooth components.
• Maintains low viscosity for consistent performance from -60ºF to 360ºF (roughly -50ºC to -180ºC)
in all conditions
• Creates smooth, easy component movement for low energy loss
• Long-lasting lubrication for extended bearing and component life
• High resistance to oxidation and corrosion
• Can be used on steel, alloy, and titanium$15.00 (RRP)Add To Cart
-
Stock Code:JLLU-0201
Juice Lubes Ceramic Juice 130ml bottle (Chain Lube)
For The Crispest Shifts And Maximum Drivetrain Efficiency.
A high-tech lube designed for dry to damp conditions, providing the crispest shifts and toughest protection even under the cruellest of gear changes.
Ceramic is a space age lube, a little goes a long way and it will dramatically improve drivetrain efficiency. If you're looking for gains or enjoy nothing more than wringing your legs dry then this is the one for you.
Chain Juice Ceramic dives deep into your chain, coating it in a protective shield that keeps shifts slick and components healthy. Thermally stable, hexagonal boron nitride sub-micron particles greatly reduce friction and prevent metal-metal contact, reducing wear and keeping things smooth and quiet on your quest to two-wheeled glory.
How To Use
Un-screw nozzle and pierce security seal. Re-attach nozzle.
For top performance, apply to a degreased chain (Use Dirt Juice Super Gnarl for this!) allow a couple of minutes for lube to penetrate the chain and wipe off any excess before starting your ride.
Size: 130mlExpected Date:10 January 2025$21.42 (RRP)
