Juice Lubes DJ Boss Chain Cleaner 500ml
Description
The Boss goes straight on to grimy chains, cassettes and jockey wheels and issues filth its P45. It's a drivetrain specific cleaner but it’ll work on any bits on your bike that are properly caked with grease and grime.
Boss is designed to be more powerful against grease, oil and grime than Dirt Juice Super, our classic Super Concentrate Bike Cleaner, and brewed for the grottiest of grime. Use it in combo with our Dirty Little Scrubber Chain Cleaning tool or paint it on directly with a brush, either works!
Not only will Boss clean your drivetrain like you've never seen before, it's also biodegradable and safe to use on metal, plastic, rubber and seals.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:JLLU-0304
Juice Lubes Frame Juice Gleaming Frame Polish 400ml (Areosol)
Showroom Shine with a Very Pleasing Scent!
You know how annoying it is to look at your cleaned and gleaming wet bike and feel all proud of your hard work, only to turn round 5 minutes later when its dried off, to be confronted with the same cack stained bike that was there an hour ago, just minus the clods of mud? Well, be frustrated no more as Juice Lubes buffing marvellous Frame Juice will sort this little problem out in no time.
How To Use
After cleaning your frame with Dirt Juice and rinsing with fresh water, allow frame to dry. Then, spray directly on to the area you want shiny again (TAKE CARE TO AVOID CONTACT WITH ANY BRAKING SURFACES) Finally, buff with a clean rag to your level of satisfaction. It will also leave the surface slippery, making cleaning next time round that bit easier and quicker as well.
Size: 400ml$26.22 (RRP)Add To Cart
-
Stock Code:WTLU-LUBE-WT1-0_5OZ
WT-1 Chain Lube is a premium synthetic chain lubricant and a drivetrain treatment for all conditions in the same bottle. It cleans and protects chains while improving overall mechanical efficiency of a drivetrain. This allows cyclists to have just WT-1 Chain Lube on hand, instead of separate dry chain lube, wet chain lube, chain cleaner, and drivetrain treatment. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes because it binds so well with chains. As a drivetrain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away, then it will protect your chain in all riding conditions and allow you to ride longer between applications.
- Cleans, lubricates, and protects chains
- Peak performance in all conditions
- Optimal choice for complex modern drivetrains
- Easy to use. Quick to apply.
- Also works on other places of your bike, including hubs, cables, and pulley wheels
APPLICATION PROCESS
Ease of use is important in selecting a chain lubricant and chain treatment. The complete application process of WT-1 Chain Lube takes less than a minute and there is no need to clean your chain before getting started.
Here’s how to begin using WT-1 Chain Lube:
1. Shake bottle of WT-1 for 30 seconds. A ball bearing is present in every bottle to help mix things up.
2. Apply one drop to each roller of your chain. We recommend applying WT-1 Chain Lube to the top side of your chain between your derailleur and chainring, just in front of that lower pulley wheel.
3. Backpedal 20-30 times. This helps WT-1 Chain Lube find its way between all the pieces of your chain.
4. Wipe chain with microfiber cloth until it appears clean with a light sheen. It'll look extra dirty at first, then it will clear up as you wipe away that dirt.
5. Ride your bike. Reapply at least once every 650km
After your first couple applications, you’ll notice that your chain looks extra dirty following your first few rides. This means that WT-1 Chain Lube is working because that detergent-like additive has made its way into the gaps and crevices of your chain and is actively pushing out dirt, grease, and debris. You’ll want to wipe down your chain after those first few rides to remove chain contaminants. As you ride more and more, you’ll see WT-1 get into its stride and your chain will be clean, silent, and efficient.$13.39 (RRP)Add To Cart
-
Stock Code:WTLU-LUBE-WT1-2OZ
WT-1 Chain Lube is a premium synthetic chain lubricant and a drivetrain treatment for all conditions in the same bottle. It cleans and protects chains while improving overall mechanical efficiency of a drivetrain. This allows cyclists to have just WT-1 Chain Lube on hand, instead of separate dry chain lube, wet chain lube, chain cleaner, and drivetrain treatment. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes because it binds so well with chains. As a drivetrain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away, then it will protect your chain in all riding conditions and allow you to ride longer between applications.
- Cleans, lubricates, and protects chains
- Peak performance in all conditions
- Optimal choice for complex modern drivetrains
- Easy to use. Quick to apply.
- Also works on other places of your bike, including hubs, cables, and pulley wheels
APPLICATION PROCESS
Ease of use is important in selecting a chain lubricant and chain treatment. The complete application process of WT-1 Chain Lube takes less than a minute and there is no need to clean your chain before getting started.
Here’s how to begin using WT-1 Chain Lube:
1. Shake bottle of WT-1 for 30 seconds. A ball bearing is present in every bottle to help mix things up.
2. Apply one drop to each roller of your chain. We recommend applying WT-1 Chain Lube to the top side of your chain between your derailleur and chainring, just in front of that lower pulley wheel.
3. Backpedal 20-30 times. This helps WT-1 Chain Lube find its way between all the pieces of your chain.
4. Wipe chain with microfiber cloth until it appears clean with a light sheen. It'll look extra dirty at first, then it will clear up as you wipe away that dirt.
5. Ride your bike. Reapply at least once every 650km
After your first couple applications, you’ll notice that your chain looks extra dirty following your first few rides. This means that WT-1 Chain Lube is working because that detergent-like additive has made its way into the gaps and crevices of your chain and is actively pushing out dirt, grease, and debris. You’ll want to wipe down your chain after those first few rides to remove chain contaminants. As you ride more and more, you’ll see WT-1 get into its stride and your chain will be clean, silent, and efficient.$37.08 (RRP)Add To Cart
-
Stock Code:WTLU-LUBE-WT1-2OZ-12PK
WT-1 Chain Lube is a premium synthetic chain lubricant and a drivetrain treatment for all conditions in the same bottle. It cleans and protects chains while improving overall mechanical efficiency of a drivetrain. This allows cyclists to have just WT-1 Chain Lube on hand, instead of separate dry chain lube, wet chain lube, chain cleaner, and drivetrain treatment. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes because it binds so well with chains. As a drivetrain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away, then it will protect your chain in all riding conditions and allow you to ride longer between applications.
- Cleans, lubricates, and protects chains
- Peak performance in all conditions
- Optimal choice for complex modern drivetrains
- Easy to use. Quick to apply.
- Also works on other places of your bike, including hubs, cables, and pulley wheels
APPLICATION PROCESS
Ease of use is important in selecting a chain lubricant and chain treatment. The complete application process of WT-1 Chain Lube takes less than a minute and there is no need to clean your chain before getting started.
Here’s how to begin using WT-1 Chain Lube:
1. Shake bottle of WT-1 for 30 seconds. A ball bearing is present in every bottle to help mix things up.
2. Apply one drop to each roller of your chain. We recommend applying WT-1 Chain Lube to the top side of your chain between your derailleur and chainring, just in front of that lower pulley wheel.
3. Backpedal 20-30 times. This helps WT-1 Chain Lube find its way between all the pieces of your chain.
4. Wipe chain with microfiber cloth until it appears clean with a light sheen. It'll look extra dirty at first, then it will clear up as you wipe away that dirt.
5. Ride your bike. Reapply at least once every 650km
After your first couple applications, you’ll notice that your chain looks extra dirty following your first few rides. This means that WT-1 Chain Lube is working because that detergent-like additive has made its way into the gaps and crevices of your chain and is actively pushing out dirt, grease, and debris. You’ll want to wipe down your chain after those first few rides to remove chain contaminants. As you ride more and more, you’ll see WT-1 get into its stride and your chain will be clean, silent, and efficient.$412.00 (RRP)Add To Cart
-
Stock Code:JLLU-0202
Juice Lube Chain Juice Dry 100ml bottle (Chain Lube)
A High-Tech And Long-Lasting Chain Lube For Dry To Damp Conditions!
Chain Juice Dry guarantees crisp and silent shifts, no sticky gunk and tough-as-nails protection for your components.
Built with an Ethanol-based carrier that’s super effective at penetrating the depths of your chain, then evaporating to leave a dry and natural wax barrier. It’s reinforced with tough, long-lasting, synthetic additives that reduce noise and wear.
It’s also kind on the environment. Dry is designed to limit droplets from flicking when you’re spinning away and is fully biodegradable to break down quickly and harmlessly.
Ideal for MTB, road, gravel, commuter bikes or anything else in between. Best applied a little in advance of riding, dry can stand up to big miles on mixed terrain..
How to Use
Un-screw nozzle and pierce security seal. Re-attach nozzle and open flow valve a small amount to avoid over application.
For top performance, chain must be thoroughly degreased (Use Dirt Juice Super Gnarl for this!) Apply a couple of layers of Chain Juice Dry , allowing 2 minutes between each layer for the lube to penetrate and “set-up” correctly. Don’t expect to see a thick oily residue on the chain – Chain Juice Dry does not work like this !
Size: 100ml$17.49 (RRP)
