Juice Lubes Big Softy Wash Brush
Description
The Softy has a dirty great big head with silky-soft bristles to be kind on paint and tough on grime. The angled head makes it a doddle to use whilst the rubberised impact zones prevent any unwanted knocks or scrapes.
As with all things, go steady. Excessive rubbing or pressure won’t do any good and could lead to surface scratching. For really sensitive bits, we’d recommend a sponge or microfibre cloth.
Please note: You should avoid boiling water or hot parts with the Big Softy. If bristles work out of shape, place the brush in hot water at 80°C for 20 seconds and then shake to restore them to their original condition.
FEATURES:
- Large brush head
- Soft bristle tips
- Tough impact resistant rubberised handle and impact zones
- Angled for easy use
- Ideal for wheels, tyres, frame, forks etc
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-6000OA-6
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Read more
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)$18.00 (RRP) -
Stock Code:SMTL82006
Ten functions including 8mm hex for cranks and a Torx 25 for disc rotor bolts
Read more
- Hex: 2, 2.5, 3, 4, 5, 6mm
- #2 Philips head screwdriver
- #5 Flat head screwdriver
- 8mm hex(fits over the 6mm)
- Torx 25 wrench.Expected Date:28 April 2025$29.77 (RRP) -
Stock Code:WTTLFWI-CIS
Ultralight Cinch and ISIS Spline Wrench Insert - older ISIS bottom brackets or the Race Face Cinch direct mount chainring system.
Read more
Steel hex wrench inserts were designed to pair with the Pack Wrench - Ultralight 1 Inch Hex and Bottom Bracket Wrench.
- The aluminum wrench (sold separately) has magnets that hold the inserts in place
- Made in the USA and CNC machined from hardened steel with electroless nickel plating
- Inserts each sold separately
We travel a lot with our bikes and are always looking for the leanest way to have everything we need to build or service a bike without packing 50 lbs of tools. To help with this we developed some very specific Pack Tools that are high quality but weight conscious for those that do mobile wrenching, travel with their bike, or just want one set of tools that can be thrown in when heading to the trail. While the Pack Wrench is lightweight, we wouldn't necessarily call the inserts lightweight. We made the inserts out of steel for extra strength and durability.$39.14 (RRP) -
Stock Code:WMTL-E-BIKESOCKET05
Compatible with 60mm Gen 1 Bosch Lockring.
Read more
Designed to save the mechanic time and money, our new e-bike lockring sockets are machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. • Precision machined aluminum body • Anodized in Wheels MFG red.$65.00 (RRP) -
Stock Code:WMTL-1526OB
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Read more
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)$18.00 (RRP)
