Juice Lubes Scrubber From Another Mother
Description
This is a cassette brush - the hook end is super handy for raking gunk out of your cassette and also pretty handy for that same job elsewhere on your drive train. Use the brush end for varying levels of scrubbing action on and around your cassette and drive train. The exact technique you go with doesn't have to be pretty - Just get in there and get it clean.
Use Dirt Juice cleaners for help loosening and breaking up the crud if required.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-GXP22-EXTStock Code:WMTL-BE-22MM-SETStock Code:WMTL-BE-24MM-SETStock Code:WMTL-24X37-EXTStock Code:WMTL-BE-25MM-SETStock Code:WMTL-29MM-EXTStock Code:WMTL-BE-29MM-SETStock Code:WMTL-BE-30MM-SETStock Code:WMTL-608-EXTStock Code:WMTL-609-EXTStock Code:WMTL-6000-EXTStock Code:WMTL-6001-EXTStock Code:WMTL-6002-EXTStock Code:WMTL-6003-EXTStock Code:WMTL-6804-EXTStock Code:WMTL-6805-EXTStock Code:WMTL-6806-EXTStock Code:WMTL-EX0001Stock Code:WMTL-EX0002Stock Code:WMTL-EX0003Stock Code:WMTL-BE-PUSHERStock Code:WMTL-PUSHERStock Code:WMTL-R6-EXT
6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor
Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings
6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing
Tap the extractor out with a punch$49.00 (RRP)$65.00 (RRP)$65.00 (RRP)$75.00 (RRP)$65.00 (RRP)$72.00 (RRP)$65.00 (RRP)$65.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$74.00 (RRP)$74.00 (RRP)$74.00 (RRP)$239.00 (RRP)$239.00 (RRP)$255.00 (RRP)$26.00 (RRP)$19.00 (RRP)$75.00 (RRP) -
Stock Code:WTTLTTWrap
When the Wolf Tooth team sat down to design this tool wrap, we made a long list of "must haves"...maybe too long. The end result was the most full-featured bicycle tool wrap available designed to make trailside repairs quick and efficient so you can get out riding. Maybe we are overly excited about optimizing our mobile wrenching experience, but these features might get you going too:
- Top flap that can be shut in a car door for a mobile workshop
- Bottom flap provides a workspace to keep your parts and tools out of the dirt when working on the ground
- Pocket layout is ideal for all the tools you need to build a bike
- Aluminum eyelets for hanging up in your home or workshop$97.85 (RRP)Add To Cart
-
Stock Code:JLTL-JRAG1
The Juice Rag is a microfibre cloth that’ll transform your bike from rags to riches. It’s your best buddy for the finishing strokes of your bike wash, polishing those fine details to perfection.
Big and tough, yet soft and smooth, the Rag is great for buffing and burnishing, wiping up spills and giving everything a good rub down. The Juice Rag is machine washable, heavy duty and super absorbent.
Washing instructions: Wash separately at 40°C, do not use fabric conditioner, do not machine dry.$16.00 (RRP)Add To Cart
-
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:WMTL-BP0001
Gone are the days when shop mechanics grabbed whatever socket was close enough to the sealed bearing size and just tapped it in. The Bearing Press Pro Kit replaces that archaic installation system, providing the right tool for the job.
The Bearing Press Pro Kit installs 14 bearing sizes including today's most common bottom bracket and thru axle bearings. The kit also includes linkage offsets for full suspension bearing installation and 7 speed spacers for faster installs. All parts are laser etched for easy identification.
PRESS-1 includes:
(2) T-Handles with 3/8" Acme threaded rod
(2) 15mm x 25mm Speed Spacer
15mm x 35mm Speed Spacer
17mm x 25mm Speed Spacer
17mm x 35mm Speed Spacer
20mm x 25mm Speed Spacer
20mm x 35mm Speed Spacer
(2) 30mm Speed Spacer
(2) 20mm frame linkage standoffs
(2) 30mm frame linkage standoffs
Open Bore Drifts for the following bearing sizes:
(2) 6802
(2) 6803
(2) 6804
(2) 6901
(2) 6902
(2) 6903
(2) 15x26
(2) 27.7x37
Over Axle Drifts for the following bearing sizes:
(2) 6802x20mm
(2) 6803x20mm
(2) 6804x20mm
(2) 6901x40mm
(2) 6902x7mm
(2) 6903x7mm$445.00 (RRP)Add To Cart
