JACK Straps Stiff Black x2
Description
Our 20mm webbing straps are woven from 100% pre consumer recycled nylon and have a simple built in anchor so when you are tightening your load down it doesn't slip around.
Each strap is 1.4m long and come in pairs. They are compatible with every lug point on JACK.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:SLRK-RK0102Stock Code:SLRK-RK0103
The rear Rack is also height-adjustable, enabling it to fit a wide variety wheel sizes while allowing you to move its center of gravity as low as possible for a more stable ride. Its wide platform has plenty of room for rack trunks, sleeping bags, tents, boxes of lima beans, or small cages full of hamsters. The stainless steel hardware we provide will enable you to fit them to most rigid 26" and 700c frames, and to forks equipped with drum, caliper, or cantilever brakes. Disc brakes and suspension are generally not compatible with our rear Racks, though there is an increasing number of frames designed to allow the use of racks and disc brakes.
Our rear rack will fit on a Pugsley/Moonlander, though it will sit slightly off-center due to the frame's offset design , and it sits a bit higher than normal since the mounts are part of the way up the seat stays rather than right at the dropouts like usual (this is to allow disc brake clearance). This is not something that will greatly affect the performance of the rack, but if you notice it try playing around with how you have your weight distributed on the rack until it feels "normal".
Rear rack WILL work with disc brakes on our Troll, Ogre, ECR, and Disc Trucker framePOAPOA -
Stock Code:SMRK18517
Great little aluminum rack. Perfect for strapping a Wald basket to, or on its own.
Stainless hardware, includes mounting tang and spacers so that you can clear the fork leg when you mount to the eyelets on the backside of your fork.
Works well with a set of P-clamps as well.
Platform measures 240mm x 130mm, eyelet to bottom of rack is 365mm.
Redesigned with eyelets for accessories and taller tombstone (backstop).
The weight limit for the Lucas 3 is 10kg/22 lbs.$180.00 (RRP)Add To Cart
-
Stock Code:JRRK-STFY-X1
Our 20mm webbing straps are woven from 100% pre consumer recycled nylon and have a simple built in anchor so when you are tightening your load down it doesn't slip around.
Each strap is 1.4m long and come in pairs. They are compatible with every lug point on JACK.$30.00 (RRP)Add To Cart
-
Stock Code:SMRK121311
Stainless steel wire basket great for mounting to a front or rear rack. 15" x 10" x 2-3/8"
Low profile for lighter weight and less likely to cause interference with lower set handlebars.Expected Date:06 May 2025POA
