- Home /
- Accessories /
- Racks /
- JACK Straps Stiff Yellow x2
JACK Straps Stiff Yellow x2
Description
Our 20mm webbing straps are woven from 100% pre consumer recycled nylon and have a simple built in anchor so when you are tightening your load down it doesn't slip around.
Each strap is 1.4m long and come in pairs. They are compatible with every lug point on JACK.
Webshops and Bike shops
You may also be interested in...
-
Our Junk Straps are basically really long toe straps. They’re 120cm woven nylon with a stainless steel buckle. We had them made to our specifications to ensure that they work well and last a long time. They’re easy to use and they stay tight. Once you’re ready, loosening them is quick and easy. They’re light, pack small, and securely and conveniently attach all kinds of stuff to your rack, basket, handlebar, backpack, under your seat, around your thigh…just about anyplace.
Stock Level:Out Of StockStock Level:Out of StockStock Level:Out of StockPOAPOA -
The rear Rack is also height-adjustable, enabling it to fit a wide variety wheel sizes while allowing you to move its center of gravity as low as possible for a more stable ride. Its wide platform has plenty of room for rack trunks, sleeping bags, tents, boxes of lima beans, or small cages full of hamsters. The stainless steel hardware we provide will enable you to fit them to most rigid 26" and 700c frames, and to forks equipped with drum, caliper, or cantilever brakes. Disc brakes and suspension are generally not compatible with our rear Racks, though there is an increasing number of frames designed to allow the use of racks and disc brakes.
Our rear rack will fit on a Pugsley/Moonlander, though it will sit slightly off-center due to the frame's offset design , and it sits a bit higher than normal since the mounts are part of the way up the seat stays rather than right at the dropouts like usual (this is to allow disc brake clearance). This is not something that will greatly affect the performance of the rack, but if you notice it try playing around with how you have your weight distributed on the rack until it feels "normal".
Rear rack WILL work with disc brakes on our Troll, Ogre, ECR, and Disc Trucker frameStock Level:2Stock Level:Out of StockStock Level:2POAPOA -
Stock Code:SLRK-RK0147
The Surly Rear Disc Rack is made of tubular CroMoly steel and is specifically designed to fit frames with seatstay-mounted disc brakes like the Straggler (650b and 700c), Krampus, and Karate Monkey.
- Tubular CroMoly rack, stainless-steel hardware
- Height-adjustable to accommodate 26-29" wheels
- Hardware housed in reusable Surly Tool Bag
- NOTE: The following "RK" part numbers will not be compatible with the new Rear Disc Racks: RK013, RK0121, RK0134
- Surly Rear Rack will haul up to 30kg (66 lb) of well-secured
- Platform dimensions: 350 x 150mm
- Weight: 1606gStock Level:Out Of StockStock Level:Out of Stock$270.00 (RRP)POA -
Stock Code:JRRK-STFY-X1
Our 20mm webbing straps are woven from 100% pre consumer recycled nylon and have a simple built in anchor so when you are tightening your load down it doesn't slip around.
Each strap is 1.4m long and come in pairs. They are compatible with every lug point on JACK.Stock Level:In StockStock Level:In Stock$30.00 (RRP)Add To Cart
-
Stock Code:SMRK121312
Stainless steel wire basket great for mounting to a front or rear rack. 15" x 10" x 2-3/8"
Low profile for lighter weight and less likely to cause interference with lower set handlebars.Stock Level:Out Of StockStock Level:Out of StockExpected Date:06 May 2025POA