Surly Snuggnut
Description
Snuggnut keeps your rear wheel from slipping forward in the dropout under pedal load. The Snuggnut’s design allows fast, easy wheel position and chain tension adjustments without the need for tools.
- Compatible with 12mm horizontal, vertical-slotted dropouts
- CNC-machined
- Tool-free chain tensioning
If using 10/12 Adapter Washers and QR wheels use a Tuggnut instead. Snuggnut is not for use with MDS Chips.
Compatible models listed below
Wednesday
ECR 29+
ECR 27.5+
Ogre
Krampus
Karate Monkey SS
Karate Monkey 27.5
Webshops and Bike shops
You may also be interested in...
-
Stock Code:MKCT20532$43.26 (RRP)
Add To Cart
-
Stock Code:SLXT-FS5061POA
-
Stock Code:SLCT-FS5063
v3 Monkey Nuts are designed for use in all Surly frames with horizontal slotted dropouts, in conjunction with a Surly 12mm thru-axle, or quick release hub using our 10/12mm adapter washers.
- Sits the wheel back 12.5mm in dropouts$40.00 (RRP)POA -
Stock Code:WTCHBR104-3234
The 104 BCD bashring can be added to the crankset to protect a 104 or 64 BCD chainring.
- Properly sized to fit 104 or 64 BCD chainring
- Two sizes for ultimate protection: smaller 26-30t (132 mm diameter) and mid-sized 32t-34t (148 mm diameter).
Compatibility
These are for use with 104 BCD chainrings or 64 BCD chainrings on 104 BCD cranksets
These are compatible with all triple 104 BCD cranksets and mount in the “big ring” position
They are compatible with double cranksets that have flat outfacing mounting tabs, like XTR M980. However, many 2x specific cranks, like Shimano XT M785, have a profiled outer surface on the mounting tab so our bashring cannot be mounted on that non-flat surface.
These work great with the 104 BCD Elliptical 32t ring. They will work with the 34t as well, but at the max diameter a few teeth will extend just beyond the bashring.
Chainring bolt requirements for this bashring
104 x 30t - 10mm bolts are required for use with the bashring.
Other 104 BCD sizes - you will need 8mm bolts (stock size that comes on 3x cranksets holding the middle and big rings on). Wolf Tooth does not make these.
When using with the 64 BCD you will need 6mm bolts to mount the bashring. Note: Orient the head of the bolt to the inside to provide clearance for the chain (bolts will go in backwards).$77.25 (RRP)
