- Home /
- Lube /
- Lubes, Grease, & oil /
- Juice Lubes Frame Polish Juice 400ml
Juice Lubes Frame Polish Juice 400ml
Description
Juice Lubes Frame Juice Gleaming Frame Polish 400ml (Areosol)
Showroom Shine with a Very Pleasing Scent!
You know how annoying it is to look at your cleaned and gleaming wet bike and feel all proud of your hard work, only to turn round 5 minutes later when its dried off, to be confronted with the same cack stained bike that was there an hour ago, just minus the clods of mud? Well, be frustrated no more as Juice Lubes buffing marvellous Frame Juice will sort this little problem out in no time.
How To Use
After cleaning your frame with Dirt Juice and rinsing with fresh water, allow frame to dry. Then, spray directly on to the area you want shiny again (TAKE CARE TO AVOID CONTACT WITH ANY BRAKING SURFACES) Finally, buff with a clean rag to your level of satisfaction. It will also leave the surface slippery, making cleaning next time round that bit easier and quicker as well.
Size: 400ml
Webshops and Bike shops
You may also be interested in...
-
Stock Code:JLLU-0406
Fully Blendable for Your Satisfaction
Don’t spend 1000’s on components and hours fettling with precise set ups to fine tune your bike but then go and leave the standard weight oil in your forks! The weight/viscosity of the oil makes a big difference to how your forks will behave in the same way that your riding weight does as well. So it doesnt really make sense that a 90kg rider will probably be using the same weight oil in his forks as 70kg rider, yet this is generally what happens.
Luckily, Juice Lubes range of fully synthetic suspension fluids are completely blendable, for precise tuning of your system. Performance has been verified by UK suspension experts K9 Industries (www.k9industries.co.uk). Head man at K9, Luis Arraiz had this to say “The oils worked flawlessly and consisitently across a wide temperature range. We will be using and recommending Juice Lubes products to all our customers from now on”
How To Use:
Always follow manufacturers instructions for the correct oil changing procedure.
Size: 500mlStock Level:In StockStock Level:In Stock$26.22 (RRP)Add To Cart
-
Stock Code:WTLU-LUBE-WT1-0_5OZ
WT-1 Chain Lube is a premium synthetic chain lubricant and a drivetrain treatment for all conditions in the same bottle. It cleans and protects chains while improving overall mechanical efficiency of a drivetrain. This allows cyclists to have just WT-1 Chain Lube on hand, instead of separate dry chain lube, wet chain lube, chain cleaner, and drivetrain treatment. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes because it binds so well with chains. As a drivetrain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away, then it will protect your chain in all riding conditions and allow you to ride longer between applications.
- Cleans, lubricates, and protects chains
- Peak performance in all conditions
- Optimal choice for complex modern drivetrains
- Easy to use. Quick to apply.
- Also works on other places of your bike, including hubs, cables, and pulley wheels
APPLICATION PROCESS
Ease of use is important in selecting a chain lubricant and chain treatment. The complete application process of WT-1 Chain Lube takes less than a minute and there is no need to clean your chain before getting started.
Here’s how to begin using WT-1 Chain Lube:
1. Shake bottle of WT-1 for 30 seconds. A ball bearing is present in every bottle to help mix things up.
2. Apply one drop to each roller of your chain. We recommend applying WT-1 Chain Lube to the top side of your chain between your derailleur and chainring, just in front of that lower pulley wheel.
3. Backpedal 20-30 times. This helps WT-1 Chain Lube find its way between all the pieces of your chain.
4. Wipe chain with microfiber cloth until it appears clean with a light sheen. It'll look extra dirty at first, then it will clear up as you wipe away that dirt.
5. Ride your bike. Reapply at least once every 650km
After your first couple applications, you’ll notice that your chain looks extra dirty following your first few rides. This means that WT-1 Chain Lube is working because that detergent-like additive has made its way into the gaps and crevices of your chain and is actively pushing out dirt, grease, and debris. You’ll want to wipe down your chain after those first few rides to remove chain contaminants. As you ride more and more, you’ll see WT-1 get into its stride and your chain will be clean, silent, and efficient.Stock Level:In StockStock Level:In Stock$13.00 (RRP)Add To Cart
-
Stock Code:JLLU-0103
Juice Lubes Brake Oil Dot 5.1 125ml
Top Drawer Fluid for your Top Drawer Kit!
DOT 5.1 Brake Fluid will guarantee beautiful brakes all the way from the chair lift to the bar. It has a super-high boiling point to keep brakes sharp and fade-free and will perform well on the longest, nastiest of Alpine descents.
Tested at World Cup downhill races and white-knuckle summer Morzine laps, DOT 5.1 works with DOT 3 , 4 and 5.1 Glycol-Ether based fluid systems.
Don’t forget. Brake Fluid is good but it won’t work with badly bled brakes, rubbish rotors and pooped pads. Always keep your brakes tip top so Brake Fluid can work its magic.
DO NOT USE IN MINERAL OIL or DOT 5 OIL BRAKE SYSTEMS!!!
How To Use:
Alway follow manufacturers instruction for the correct oil changing procedure. If you dont feel you have the technical ability to safely carry the work out correctly, then please consult an expert. Dont take chances with your brakes!
Size: 125mlStock Level:Out Of StockStock Level:Out of StockExpected Date:10 January 2025$18.02 (RRP) -
Stock Code:JLLU-0511
Juice Lubes Bearing Juice 500ml tub Mechanic Pack (Bearing Grease)
Bearing Juice is a tough-as-nails lithium grease that’s designed specifically for bicycle use. It’s for all your bits with bearings – such as headsets, bottom brackets and hubs.
The adhesive formula has been blended specifically for the low speed applications found on bikes. When your bearings start spinning, BJ will kick in and release its magical lubricating juice to reduce friction and battle moisture, keeping your bike running sweeter for longer.
Bearing Juice is extremely resistant to water wash out, whack it in and it stays there. Purge your bearings with it and slap some on the outside of your bearing seals to prevent water from getting inside in the first place.
It's anti corrosion, it's tough against jet washing and it'll guarantee more time on the trails and less time in the workshop.
Remember, Bearing Juice is primarily for your moving parts, such as bearings. For assembly of all threaded parts we would recommend our AAS Juice aluminium anti-seize assembly paste.Stock Level:Out Of StockStock Level:Out of StockExpected Date:10 January 2025$39.66 (RRP) -
Stock Code:JLLU-TJ140
Introducing the brand new formula Tyre Juice, new-and-improved!
Tyre Juice is a World Cup downhill used, abused and approved sealant for Brendan Fairclough, Phil Atwill and friends to tubeless their tyres.
Tyre Juice wards off punctures and pinch-flats by coating your rubber in a protective force field.
Slosh it in and you’ll enjoy a puncture-proof performance on the thorny roads and rocky trails. It also allows you to run lower pressures, meaning more grip, more comfort and more speed.
It’s a doddle to install and battles faff every time you ride.
New formula:
- Thinner formula will coat your tyres like no other
- Seals holes up to 7mm
- Filled with particles to create a stronger and faster seal on punctures
- Finds the little crevices between the bead and rim
- Handles high and low pressures so great for MTB, Road & Gravel tyres
- Available in 500ml (5L and 130ml coming soon)
- Advanced synthetic latex formula is ammonia-free, won’t damage wheels or tyres and won’t cause allergic reactions
- Longer effective life than competitors, you’ll get 6-9 months of riding before needing a top-up in typical UK conditions
- Water washable means less mess when installing or changing tyres
- Can be installed through the valve or direct into your tyre
- Won’t dry out and ball up like other sealants
- A resealable bottle makes installation easy
- Non-corrosive
- Non-Hazardous
Tyre Juice works with all road and mountain bike tubeless and UST systems.Stock Level:Out Of StockStock Level:Out of StockExpected Date:10 January 2025$22.00 (RRP)