MKS MX-10 8mm C/Tension Single
Description
MKS MX-10 8mm C/Tension Single
Webshops and Bike shops
You may also be interested in...
-
Stock Code:SLCT-CH9990
· Hurdy Gurdy is another nifty device that keeps a rear wheel from slipping forward in the dropout under pedal load
· Designed for Surly Cross-Check’s semi-horizontal front-loading dropouts, and will also work on many other similar dropouts
· Investment cast of stainless steel for durability and good looks$60.00 (RRP)POA -
Stock Code:SLCT-CH9999
We decided to design a chain tensioner that will keep that rear wheel static in our dropouts...and most other kinds of rear-facing horizontal dropouts. Plus, ours will open up a bottle o' brew. The body of the Tuggnut is investment cast in stainless steel for durability. It features a thumbscrew, for tool-free adjustments, and 2 axle holes for a wide range of fore/aft wheel positions. The Tuggnut comes with an aluminum adapter that reduces the axle hole from 10mm to 6mm, so you can use it with quick-release axles, in addition to nutted axles. We sell it as a single, because you really only need one...on the drive side. But, if you absolutely need one on the non-drive side of your rig, to achieve balance in your life, you are in luck...the bottle opener works either way.
$55.00 (RRP)POA -
Stock Code:SLCT-CH9989
Snuggnut keeps your rear wheel from slipping forward in the dropout under pedal load. The Snuggnut’s design allows fast, easy wheel position and chain tension adjustments without the need for tools.
- Compatible with 12mm horizontal, vertical-slotted dropouts
- CNC-machined
- Tool-free chain tensioning
If using 10/12 Adapter Washers and QR wheels use a Tuggnut instead. Snuggnut is not for use with MDS Chips.
Compatible models listed below
Wednesday
ECR 29+
ECR 27.5+
Ogre
Krampus
Karate Monkey SS
Karate Monkey 27.5$50.00 (RRP)POA -
Stock Code:PSCT-CH0900
- Two-pulley tensioner
- Adjustable chainline
- CNC-machined AL-6061-T6
- Not for use with fixed-gear drivetrains or coaster brake
- 3/32" chain$110.12 (RRP)POA -
Stock Code:WTCT-GWLF-BRAZE-L-BLK
The Wolf Tooth GnarWolf Braze-On Chainguide rev2 provides maximum chain retention in the roughest gravel, CX, and road races. Designed specifically around 1x wide/narrow chainrings, the GnarWolf Chainguide rev2 will keep your chain glued to your chainring in the most extreme of conditions. No other gravel, road, or CX chainguide is as rigid or as easy to adjust as the GnarWolf.
- 8mm of chainline adjustment via our GuideLock quick adjustment system. No shims required.
- Infinite vertical adjustment between 34T and 46T for round and oval chainrings
- Loosen one screw to flip the guide out of the way for easy chain removal without losing any of the guide's adjustments
- All adjustments made with common 4mm hex key
- Designed for the rigors of the muddiest CX course or roughest gravel riding, the Wolf Tooth engineers made this guide extremely stiff and strong while keeping it light at 44g
- Specific guide shaping is optimized for use with elliptical/oval and round chainrings
- Installation takes just a few minutes – no need to remove your crank arms
Compatibility
- Designed to fit on any bike with an integral braze-on mount. If you have a round seat tube with no braze-on mount, you can buy a braze-on adapter
- Designed to accommodate chainlines from approx. 45mm to 51mm
- Minimum distance of 10 mm between crank and center of ring
- Optimized for use with oval and round 34-46T chainrings. (Clearance for larger chainrings is possible using the LoneWolf mid sweep and high sweep braze-on mount guides.)
- For 1x use only
- Not compatible with crankset mounted bashrings
* Note: Braze-on mount is not at the same height on all bikes so max chainring size will vary somewhat depending on frame brand and model$101.88 (RRP)Add To Cart
