SOMA SPARROW HANDLEBAR
The Sparrow is a touring/townie bar. The 490mm version is more agile for squeezing through traffic than other townie/MTB bars. The 520mm is still narrow, but with a grip area that fits levers and shifters. The 560mm size is better for climbing and single-speeders. Try all the sizes on a single-speed or fixie. Can be used flipped to be used as a riser bar or down for a less upright position.
- Shotpeened Tange Aluminum
- Widths: 560 mm, 520mm or 490mm
- Silver or Black
- 25.4 mm clamp diameter
- 50mm drop/rise
- 22.2mm grip diameter, 20.0mm inside diameter at ends to allow use of pursuit levers.
- Weight 245g
The Sparrow is a touring/townie bar. The 490mm version is more agile for squeezing through traffic than other townie/MTB bars. The 520mm is still narrow, but with a grip area that fits levers and shifters. The 560mm size is better for climbing and single-speeders. Try all the sizes on a single-speed or fixie. Can be used flipped to be used as a riser bar or down for a less upright position.
- Shotpeened Tange Aluminum
- Widths: 560 mm, 520mm or 490mm
- Silver or Black
- 25.4 mm clamp diameter
- 50mm drop/rise
- 22.2mm grip diameter, 20.0mm inside diameter at ends to allow use of pursuit levers.
- Weight 245g
The Sparrow is a touring/townie bar. The 490mm version is more agile for squeezing through traffic than other townie/MTB bars. The 520mm is still narrow, but with a grip area that fits levers and shifters. The 560mm size is better for climbing and single-speeders. Try all the sizes on a single-speed or fixie. Can be used flipped to be used as a riser bar or down for a less upright position.
- Shotpeened Tange Aluminum
- Widths: 560 mm, 520mm or 490mm
- Silver or Black
- 25.4 mm clamp diameter
- 50mm drop/rise
- 22.2mm grip diameter, 20.0mm inside diameter at ends to allow use of pursuit levers.
- Weight 245g
Webshops and Bike shops
Related Products
-
Description
The Open bar is an upright bar but not an uptight bar. It’s equally suited to cruising, commuting, and even some singletrack, though it should be noted that this is not by any means a DH bar. We left it a bit flexy to take some of the harsh out of your ride. The angle makes it comfy for your wrists. The width enables loads of control. It’s got plenty of room for grips, shifters and brake levers. Knurled clamp area. 4130 CroMoly steel.
Clamp diameter: 25.4mm
Width: 666mm
Rise: 40mm
Sweep Angle: 53 degrees
Color: E.D. coated Black.POA -
Description
Our road bar features a mild wing shape on top, clamping area wide enough for aero bars, mid-compact reach and drop. This is the modern bar for the modern road bike. Our Road bar wing section is small enough not to restrict hand movement when riding on the top and allows bar angle adjustment with out “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life. Certified to EN, tested to DIN+.
Layup uses 3 different fiber types with different tensile strengths and tensile modulus, including High Strength carbon fiber. This helps allocate stiffness and flex where needed.
All carbon fiber is produced by Toray and uses tailor made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber for Boeing and Airbus.
Both the Road and Cross bar are made in one piece, not three pieces co-molded and glued together.
Bars are molded over an EPS mandrel to avoid wrinkles inside the layup during molding. Most other bars are molded over inflatable nylon bladders.
1.5K woven impact ends help prevent damage to uni-directional fibers from impact.
Reach 78.5mm.
Drop is proportional. Road drops are: 40CM 137mm, 42CM 140mm, 44CM 140mm, 46CM 143mm -
Description
Titanium gives you a ride quality unavailable in other materials. Thomson manufacturing gives you light weight and no shims at the stem clamp. Two sweeps are available in the flat bar design and a riser bar is also available.
-
Description
750mm wide and offers 15mm of rise together with a 5° backsweep and 8° upsweep. Built for strength with enough flex built in for all day comfort. Strong enough for All Mountain/Freeride, light enough for racing.
Bars are made with three different fiber types with different tensile strength and tensile modulus, including High Strength carbon fibers. This helps to allocate stiffness and flex where needed.
Bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders.
All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus.
1.5K woven impact ends help prevent damage to uni directional fibers from shortening the bar or impact with the ground.
Weight 215g
*NOT SUITABLE FOR BAR ENDS. -
Description
Cowbell blends speed, comfort, and efficiency for high performance efforts on gravel and paved roads. Designed with gravel racing and riding in mind, Cowbell bars feature a 12-degree flare that puts your hands, wrists, and arms into a natural, comfortable position in the drops.
- Lightweight and strong 6061-T6 alloy construction with bead-blasted finish
- Drop/Reach: 115/68mm
- 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars
- 12 deg flare and drop anglesPOA
