DH158 TREK
Description
Attaches to frame with (2) M4x4 Socket Head Screws
Replaces:
Trek part #W303978
Trek part #W295979
Notes:
This hanger has 4mm threaded fastener holes in it. DROPOUT-164 is the same hanger, but with 3mm threaded holes.
Trek part #W295979 is thicker where the fastener holes are, but DROPOUT-158 will work.
Gary Fisher
Cronus CX Pro - 2012
Cronus CX Ultimate - 2012
Cronus CX Ultimate Frameset - 2012
Ion CX - 2012
Ion CX Pro - 2012
Ion CX Pro Frameset - 2012
Trek
5-series Madone - 2011
Cronus (Road) - 2010-2011
Fisher Cronus - 2010-2012
Fisher Ion - 2010-2012
Ion (Road) - 2010-2011
Madone 5 series - 2011
Madone 6 Series - 2010-2011
Speed Concept - 2010-2011
Speed Concept 2 Series - 2011
Speed Concept 7 Series - 2011
Speed Concept 9 Series - 2011
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMDH-312
Attaches to frame with (1) M4x12 Flat Head Screw
Fastener Included
Replaces Felt Part #9000028
Felt
FX with Thru Axle - 2016-2018
VR with Thru Axle - 2017-2018
Note: This hanger is slightly different than our DROPOUT-239. Please verify frame model and year for exact fit.$62.00 (RRP)Add To Cart
-
Stock Code:WMDH-M4-14FS
Replacement M4 x 10 Flat Head Screw fastener for derailleur hangers.
Thread: M4-0.7
Overall Length: 14mm
Material: Steel
Use with 2.5mm hex wrench
Bag of 5$7.00 (RRP) -
Stock Code:ACDH-FS2307
The All-City Master Dropout is a sliding dropout system consisting of replaceable dropout plates and fixing hardware. Designed for use with 12mm thru-axles and flat-mount brakes, it is compatible only with select All-City models.
- Allows riders to convert from a geared to single-speed setup or vice-versa
- Compatible only with select All-City models
- No additional chain tension adjustment required
- Threaded cap / nut for axle installation
- Cap nut and O-ring included
- Use with drive-side platesPOA -
Stock Code:WTDR10S-GLINK
The GoatLink is simply the fastest route to improved wear and long-term shifting performance on wide-range 1x10 drivetrains using the Shimano Shadow+ Rear derailleurs. The GoatLink, made by Lindarets and Wolf Tooth, re-positions 10-speed Shimano Shadow+ Rear derailleurs to the optimal location when using the GC 40T and GC 42T cassette expanders.
Compatibility: Compatible Shimano Shadow+ 10-speed rear derailleurs (clutch type ONLY) have a Direct Mount link (including spacer, if so equipped) or B-pivot knuckle with a thickness of 7.9-8.1mm. Shimano changed to this sometime in 2013. Very early Shadow+ rear derailleurs have a thinner link and are not compatible.
-The GoatLink is optimized for use with Wolf Tooth’s 40- and 42-tooth GCs and all sizes of Drop-Stop chainrings - but will work with any 11-40t or 11-42t 10-speed cassette.
- Direct Mount-native frames and SRAM rear derailleurs are not supported.
- You will NEVER need a longer b-screw with the GoatLink
- Improvements with the GoatLink*
Chain wrap at 11t (effects cassette life):
40t: Improved by 69%
42t: Improved by 53%
Free chain length at 11t (effects shifting precision):
40t: Improved by 25%
42t: Improved by 19%$50.89 (RRP)Add To Cart
-
Stock Code:BTDH-019$45.00 (RRP)
Add To Cart
