Wheels MFG Drop-out savers >7mm wide 2 p
Description
Wheels MFG Drop-out savers >7mm wide 2 per
Dropout savers are designed to replace damaged threads in rear derailleur mounts.
Made from aircraft quality steel, dropout savers provide an economical and reliable alternative to the "major surgery" of replacing a complete dropout
• Wide Dropout Saver fits dropouts 7mm or more in thickness
• Narrow Dropout Saver fits dropouts 7mm or less in thickness
• 2 pieces
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-1526OB
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Read more
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)$18.00 (RRP) -
Stock Code:WMTL-1526OB
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Read more
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)$18.00 (RRP) -
Stock Code:WMTL-TL9000
Shimano Hollowtech II Cranksets compression bolt
Read more
Precision machined anodized aluminum designed to allow for easy installation, removal or adjustments of the Shimano Hollowtech II Crankset compression bolt.$56.00 (RRP)Add To Cart
-
Stock Code:WMTL-ST0006
An evolution of our original bushing toolset which required the use of a hammer to pound out shock bushings. The new design uses our threaded handle press system to easily and efficiently remove shock bushing in 12mm and 1/2 inch sizes.
Read more
Fits 12mm and 1/2" bushings.
Machined aluminum$199.00 (RRP)Add To Cart
-
Stock Code:WMTL-6901OB-2
Our 6901 open bore adapter is used to press 6901 sealed bearings. The adapter is machined with one step at 11.9mm OD, which fits into the center of the sealed bearing.
Read more
Installs: 6901 bearing
Inner Step Outer Diameter: 11.9mm
Outer Diameter: 23.8mm
Thickness: 5.9mm
Thru Hole Diameter: 5.2mm
Inner hole sized to fit quick release skewer or M5 bolt
Compatible with PRESS-2
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)$18.00 (RRP)Add To Cart
