Yokozuna Standard DBP Mag 07 Louise
Description
Yokozuna Standard Compound (Long Life) Disc Brake Pads suit Magura Louise 2007
Webshops and Bike shops
You may also be interested in...
-
Stock Code:YZBR730010
Yokozuna Motoko Road Disc Brake POST MOUNT
Hydraulic brake performance without the complexities of full hydraulic brakes. A great option for touring cyclists who've gotten stuck out in the boonies with a leaky brake line. But high performance enough for CX, road race and gravel events.
By sticking with a cable system you not only keep reliability, but you don't need a dedicated hydraulic brake lever. You can use your old Dura Ace brifters.
Premium compressionless cables, IS mount hardware and 160mm stainless steel rotors included. (If your bike can't handle our stout compressionless housing, you can run standard brake housing too)
- Compatible with cable-actuated Road Brake Levers
- Closed Hydraulic System (Mineral Oil)
- Includes Reaction Compressionless brake cable set for superb response
- Dual Piston pad action
- Simple one knob pad adjustment
- Caliper weighs only 145 grams.$260.00 (RRP) -
Stock Code:PCBR-030PEWTERStock Code:PCBR-030POLISHStock Code:PCBR-030PURPLEStock Code:PCBR-030SILVERStock Code:PCBR-030BLACK
The Short Pull Touring Canti is a powerful cantilever brake with a similar design to the Neo-Retro, but with the arms angled upward. This gives the brake a much narrower profile without significantly reducing stopping power.
The narrower profile of the Touring Canti can be desirable if you’re riding with large panniers or if your current brakes don’t give you enough heel or calf clearance.
The arms of the Touring Canti are machined from lightweight 6061 aluminum. Their T-shaped cross section prevents the brake from flexing too much under load.
The brake pads mount to slots in the arms that allow for vertical positioning. The toe-in and angle can be fine-tuned thanks to the spherical washers on the brake pads’ threaded posts.
Like all of Paul brakes, the Touring Canti has a sealed pivot mechanism. Rubber seals and a stainless steel bushing keep the brake arms turning smoothly no matter what you’re riding through. The spring tension can be adjusted in both pivots to center the brake and to adjust the strength of the return swing.$281.00 (RRP)$358.00 (RRP)$281.00 (RRP)$281.00 (RRP)$281.00 (RRP) -
Stock Code:PCBR-048BKLPStock Code:PCBR-048BKORLPStock Code:PCBR-048POLPStock Code:PCBR-048PUBKLPStock Code:PCBR-048PWBKLPStock Code:PCBR-048SILPStock Code:PCBR-048SIORLP
Three years of development and we think Paul nailed it, this is arguably the best mechanical caliper ever made for a bicycle. It’s available in Long Pull, Short Pull, and Campagnolo pull.
- Tried and true ball bearing in a ramp system.
- Bigger balls for smoothness and increased pad travel.
- Hardened the steel where the balls contact the ramps.
- Three hardened steel pins to locate the pad actuator.
- Added “fangs” to the inner backing plate for stiffness and beefed up outer caliper body.
As always, allow a couple short rides to bed in the pads. Around the 3rd ride, these brakes really start to BITE!$495.00 (RRP)$495.00 (RRP)$641.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP) -
Stock Code:PCBR-048BKORSPStock Code:PCBR-048BKSPStock Code:PCBR-048POSPStock Code:PCBR-048PUBKSPStock Code:PCBR-048PWBKSPStock Code:PCBR-048SIORSPStock Code:PCBR-048SISP
Three years of development and we think Paul nailed it, this is arguably the best mechanical caliper ever made for a bicycle. It’s available in Long Pull, Short Pull, and Campagnolo pull.
- Tried and true ball bearing in a ramp system.
- Bigger balls for smoothness and increased pad travel.
- Hardened the steel where the balls contact the ramps.
- Three hardened steel pins to locate the pad actuator.
- Added “fangs” to the inner backing plate for stiffness and beefed up outer caliper body.
As always, allow a couple short rides to bed in the pads. Around the 3rd ride, these brakes really start to BITE!$495.00 (RRP)$495.00 (RRP)$641.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP) -
Stock Code:PCBR-048BKORSPStock Code:PCBR-048BKSPStock Code:PCBR-048POSPStock Code:PCBR-048PUBKSPStock Code:PCBR-048PWBKSPStock Code:PCBR-048SIORSPStock Code:PCBR-048SISP
Three years of development and we think Paul nailed it, this is arguably the best mechanical caliper ever made for a bicycle. It’s available in Long Pull, Short Pull, and Campagnolo pull.
- Tried and true ball bearing in a ramp system.
- Bigger balls for smoothness and increased pad travel.
- Hardened the steel where the balls contact the ramps.
- Three hardened steel pins to locate the pad actuator.
- Added “fangs” to the inner backing plate for stiffness and beefed up outer caliper body.
As always, allow a couple short rides to bed in the pads. Around the 3rd ride, these brakes really start to BITE!$495.00 (RRP)$495.00 (RRP)$641.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP)
