Surly Snuggnut
Description
Snuggnut keeps your rear wheel from slipping forward in the dropout under pedal load. The Snuggnut’s design allows fast, easy wheel position and chain tension adjustments without the need for tools.
- Compatible with 12mm horizontal, vertical-slotted dropouts
- CNC-machined
- Tool-free chain tensioning
If using 10/12 Adapter Washers and QR wheels use a Tuggnut instead. Snuggnut is not for use with MDS Chips.
Compatible models listed below
Wednesday
ECR 29+
ECR 27.5+
Ogre
Krampus
Karate Monkey SS
Karate Monkey 27.5
Webshops and Bike shops
You may also be interested in...
-
Stock Code:MKCT20532$43.26 (RRP)
Add To Cart
-
Stock Code:SLCT-CH9999
We decided to design a chain tensioner that will keep that rear wheel static in our dropouts...and most other kinds of rear-facing horizontal dropouts. Plus, ours will open up a bottle o' brew. The body of the Tuggnut is investment cast in stainless steel for durability. It features a thumbscrew, for tool-free adjustments, and 2 axle holes for a wide range of fore/aft wheel positions. The Tuggnut comes with an aluminum adapter that reduces the axle hole from 10mm to 6mm, so you can use it with quick-release axles, in addition to nutted axles. We sell it as a single, because you really only need one...on the drive side. But, if you absolutely need one on the non-drive side of your rig, to achieve balance in your life, you are in luck...the bottle opener works either way.
$55.00 (RRP)POA -
Stock Code:WTCHBR104-3234
The 104 BCD bashring can be added to the crankset to protect a 104 or 64 BCD chainring.
- Properly sized to fit 104 or 64 BCD chainring
- Two sizes for ultimate protection: smaller 26-30t (132 mm diameter) and mid-sized 32t-34t (148 mm diameter).
Compatibility
These are for use with 104 BCD chainrings or 64 BCD chainrings on 104 BCD cranksets
These are compatible with all triple 104 BCD cranksets and mount in the “big ring” position
They are compatible with double cranksets that have flat outfacing mounting tabs, like XTR M980. However, many 2x specific cranks, like Shimano XT M785, have a profiled outer surface on the mounting tab so our bashring cannot be mounted on that non-flat surface.
These work great with the 104 BCD Elliptical 32t ring. They will work with the 34t as well, but at the max diameter a few teeth will extend just beyond the bashring.
Chainring bolt requirements for this bashring
104 x 30t - 10mm bolts are required for use with the bashring.
Other 104 BCD sizes - you will need 8mm bolts (stock size that comes on 3x cranksets holding the middle and big rings on). Wolf Tooth does not make these.
When using with the 64 BCD you will need 6mm bolts to mount the bashring. Note: Orient the head of the bolt to the inside to provide clearance for the chain (bolts will go in backwards).$75.00 (RRP) -
Stock Code:SLCT-CH9992POA
-
Stock Code:WTCTLONEWOLF-CV-PROStock Code:WTCTLONEWOLF-CV-LOWStock Code:WTCTLONEWOLF-CV-MID
The Wolf Tooth LoneWolf Aero Chainguide for Cervelo prevents dropped chains on select Cervelo models when equipped with a 1x drivetrain. This product has been tested and developed alongside Team Jumbo-Visma, who have been racing with this in some of road cycling’s biggest races, winning the Maglia Rosa in the 2023 Giro d'Italia.
Compatibility
• Chainring Compatibility - Mid Sweep 48-52T round chainrings
• Compatible with Cervelo S5 and P5 bikes that have a braze-on front derailleur mount
• Mounts directly to the frame in place of the braze-on
• Only for use with 1x drivetrains
• Head has 8mm of adjustment for chainline via our GuideLock quick adjustment system
Note: Braze-on mount is not at the same height on all bikes so max chainring size will vary somewhat depending on frame brand and model$101.88 (RRP)$101.88 (RRP)$101.88 (RRP)
