WHEELS MFG OVER AXLE ADAPTER
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Our 6001 over axle adapter is used to press 6001 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6001 bearing
Outer Diameter: 27.8mm
Thickness: 7mm
Thru Hole Diameter: 12.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Our 6002 over axle adapter is used to press 6002 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6002 bearing
Outer Diameter: 31.8mm
Thickness: 7mm
Thru Hole Diameter: 15.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Our 6003 over axle adapter is used to press 6003 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6003 bearing
Outer Diameter: 34.8mm
Thickness: 7mm
Thru Hole Diameter: 17.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
These drifts are spares for your most commonly used bearing sizes. They're also an excelent addition to the Press-4
Our 6803 over axle adapter is used to press 6803 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6803 bearing
Outer Diameter: 25.8mm
Thickness: 20mm
Thru Hole Diameter: 17.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Our 6804 over axle adapter is used to press 6804 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6804 bearing
Outer Diameter: 31.8mm
Thickness: 20mm
Thru Hole Diameter: 20.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Our 6900 over axle adapter is used to press 6900 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6900 bearing
Outer Diameter: 21.8mm
Thickness: 40mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Our 6901 over axle adapter is used to press 6901 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6901 bearing
Outer Diameter: 23.8mm
Thickness: 17mm
Thru Hole Diameter: 12.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Our 6901 over axle adapter is used to press 6901 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6901 bearing
Outer Diameter: 23.8mm
Thickness: 40mm
Thru Hole Diameter: 12.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
These drifts are spares for your most commonly used bearing sizes. They're also an excelent addition to the Press-4
Our 6903 over axle adapter is used to press 6903 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6903 bearing
Outer Diameter: 29.8mm
Thickness: 7mm
Thru Hole Diameter: 17.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Our 6904 over axle adapter is used to press 6904 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6904 bearing
Outer Diameter: 37.8mm
Thickness: 7mm
Thru Hole Diameter: 20.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Webshops and Bike shops
Related Products
-
Description
Long handle T25 Torx L-wrench.
This is the wrench size needed to remove/install the SRAM direct mount chainrings. It can be difficult to properly engage a socket into these bolts because the crank spindle is very close to the bolts. This wrench makes the job easy and reduces the chances of stripping out the bolt head. -
Description
The Double Ender brush is a flexible, stiff and double-pronged brush that'll leave your dirty bits gleaming.
It comes with a tough rubber handle and hard-wearing bristles for anything that’s filthy enough to need a proper scrubbing. It's built to be stiff enough to really take some welly but flexible enough to reach those tricky spots.
As with all things, go steady. Excessive rubbing or pressure won’t do any good and could lead to surface scratching. For really sensitive bits, we’d recommend a sponge or microfibre cloth.
- Removes dirt from hard to reach areas
- Adjustable prongs
- Hard wearing nylon bristles
- Tough impact resistant rubberized handle and impact zones
- Ideal for linkages, discs, shocks, pedals, chainstays, spokes etc -
Description
Individual extractor for removing 6001, 6801 & 6901 sealed bearings with 12mm inside diameter.
These bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.
All extractors are size specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor. If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt -
Description
Compatible with 43mm Gen 3 Bosch Lockring.
Designed to save the mechanic time and money, our new e-bike lockring sockets are machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. • Precision machined aluminum body • Anodized in Wheels MFG red. -
Description
Chris King Small Split Ring (for the THB001 Hub Service Tool Kit)- THB007
POA
