WHEELS MFG OVER AXLE ADAPTER
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Our 6001 over axle adapter is used to press 6001 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6001 bearing
Outer Diameter: 27.8mm
Thickness: 7mm
Thru Hole Diameter: 12.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Our 6002 over axle adapter is used to press 6002 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6002 bearing
Outer Diameter: 31.8mm
Thickness: 7mm
Thru Hole Diameter: 15.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Our 6003 over axle adapter is used to press 6003 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6003 bearing
Outer Diameter: 34.8mm
Thickness: 7mm
Thru Hole Diameter: 17.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
These drifts are spares for your most commonly used bearing sizes. They're also an excelent addition to the Press-4
Our 6803 over axle adapter is used to press 6803 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6803 bearing
Outer Diameter: 25.8mm
Thickness: 20mm
Thru Hole Diameter: 17.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Our 6804 over axle adapter is used to press 6804 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6804 bearing
Outer Diameter: 31.8mm
Thickness: 20mm
Thru Hole Diameter: 20.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Our 6900 over axle adapter is used to press 6900 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6900 bearing
Outer Diameter: 21.8mm
Thickness: 40mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Our 6901 over axle adapter is used to press 6901 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6901 bearing
Outer Diameter: 23.8mm
Thickness: 17mm
Thru Hole Diameter: 12.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Our 6901 over axle adapter is used to press 6901 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6901 bearing
Outer Diameter: 23.8mm
Thickness: 40mm
Thru Hole Diameter: 12.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
These drifts are spares for your most commonly used bearing sizes. They're also an excelent addition to the Press-4
Our 6903 over axle adapter is used to press 6903 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6903 bearing
Outer Diameter: 29.8mm
Thickness: 7mm
Thru Hole Diameter: 17.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Our 6904 over axle adapter is used to press 6904 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6904 bearing
Outer Diameter: 37.8mm
Thickness: 7mm
Thru Hole Diameter: 20.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)
Webshops and Bike shops
Related Products
-
Description
Wheels MFG Dropout Saver Kit 6 piece
The Dropout Saver system is an alternative to replacing badly bent or damaged derailleur dropouts. Rather than replacing the damaged dropout completely, simply drill out the damaged threads and install a Dropout Saver and realign the dropout.
Kit includes (1) 15/32" drill bit, (2) DS-1 wide, and (3) DS-2 narrow dropout savers -
Description
Our 6002 over axle adapter is used to press 6002 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6002 bearing
Outer Diameter: 31.8mm
Thickness: 7mm
Thru Hole Diameter: 15.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations) -
Description
The Double Ender brush is a flexible, stiff and double-pronged brush that'll leave your dirty bits gleaming.
It comes with a tough rubber handle and hard-wearing bristles for anything that’s filthy enough to need a proper scrubbing. It's built to be stiff enough to really take some welly but flexible enough to reach those tricky spots.
As with all things, go steady. Excessive rubbing or pressure won’t do any good and could lead to surface scratching. For really sensitive bits, we’d recommend a sponge or microfibre cloth.
- Removes dirt from hard to reach areas
- Adjustable prongs
- Hard wearing nylon bristles
- Tough impact resistant rubberized handle and impact zones
- Ideal for linkages, discs, shocks, pedals, chainstays, spokes etc -
Description
Replacement Handle Assembly for our Large Sealed Bearing Press (PRESS-1).
(1) Machined fixed end aluminum "T" Handle with brass insert.
(1) Machined non-fixed end aluminum "T" Handle with brass insert.
(1) 3/8" x 12" Threaded Rod
(1) M5x12 flat head screw to secure fixed-end handle to rod -
Description
BBS4416: 16 notch BB socket for 44mm diameter notch pattern, Shimano BB80, BB5700, BB70, BB51, Enduro T47, Wheels T47, many from Hollowtech II, Campagnolo, Chris King, FSA MegaExo, Hope, SRAM/Truvativ GXP, Race Face X-type, Surly, and more
Wolf Tooth bottom bracket sockets are tools for installation and removal of external cup bottom brackets. They are machined in Minnesota with 7075-T6 aluminum.
- Large finger notches so you can start threading the cups by hand
- 3/8" square socket or 1" hex for ratchet/torque wrench
- Most sockets have either a Shimano bearing preload tool or a 16mm hex for use with Race Face Cinch cranksets
- Steel inserts for magnetic coupling compatibility with the Pack Wrench
