WHEELS MFG OPEN BORE ADAPTER
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)
Our 1728 open bore adapter is used to press 28x17 sealed bearings. The adapter is machined with one step at 27mm OD, which fits in to the center of the sealed bearing.
Installs: 17287 bearing
Inner Step Outer Diameter: 16.8mm
Outer Diameter: 27.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)
Our 2437 open bore adapter is used to press 24x37 sealed bearings in to Shimano compatible bottom bracket cups, and direct fit frames like Trek BB90. The adapter is machined with one step at 24mm OD, which fits in to the center of the sealed bearing.
Use with 24x37x7 bearing
Outer Diameter: 37mm
Inner Step Diameter: 24mm
Inner hole sized to fit 3/8" threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, anodized gray aluminum
Sold individually
SRAM Predictive Steering Bearing Open Bore adapter, also referred to as a drift, is used to press sealed bearings in to SRAM Predictive Steering front hubs. The adapter is machined with a 37mm OD, and a machined step at 27.5mm that slips in to the center of the sealed bearing. Compatible with our PRESS-1 or PRESS-4 sealed bearing press to press in the bearing.
Installs: 27.5X37 bearing
Inner Step Outer Diameter: 27.3mm
Outer Diameter: 36.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)
Our 6000 open bore adapter, also referred to as a drift, is used to press 6000 sealed bearings.
Installs: 6000 bearing
Outer Diameter: 21.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Thickness: 8mm
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)
Our 6001 open bore adapter is used to press 28x12 sealed bearings. The adapter is machined with one step at 12mm OD, which fits in to the center of the sealed bearing.
Installs: 6001 bearing
Inner Step Outer Diameter: 11.9mm
Outer Diameter: 27.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)
Our 6002 open bore adapter is used to press 32x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 6002 bearing
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 31.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)
Our 6003 open bore adapter is used to press 35x17 sealed bearings. The adapter is machined with one step at 17mm OD, which fits in to the center of the sealed bearing.
Installs: 6003 bearing
Inner Step Outer Diameter: 16.8mm
Outer Diameter: 34.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)
Our 6801 open bore adapter is used to press 21x12 sealed bearings. The adapter is machined with one step at 12mm OD, which fits in to the center of the sealed bearing.
Installs: 6801 bearing
Inner Step Outer Diameter: 11.9mm
Outer Diameter: 20.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)
Our 6802 open bore adapter is used to press 24x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 6802 bearing
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 23.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)
Our 6803 open bore adapter is used to press 26x17 sealed bearings. The adapter is machined with one step at 17mm OD, which fits in to the center of the sealed bearing.
Installs: 6803 bearing
Inner Step Outer Diameter: 16.9mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)
Our 6804 open bore adapter is used to press 32x20 sealed bearings. The adapter is machined with one step at 20mm OD, which fits in to the center of the sealed bearing.
Installs: 6804 bearing
Inner Step Outer Diameter: 19.8mm
Outer Diameter: 31.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)
Our 6805 open bore adapter is used to press 37x25 sealed bearings. The adapter is machined with one step at 25mm OD, which fits in to the center of the sealed bearing.
Installs: 6805 bearing
Inner Step Outer Diameter: 24.8mm
Outer Diameter: 36.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)
Our 6806 open bore adapter is used to press 42x30 sealed bearings. The adapter is machined with one step at 30mm OD, which fits in to the center of the sealed bearing. Common bearing size for BB30 frames and bottom brackets.
Installs: 6806 bearing
Inner Step Outer Diameter: 29.9mm
Outer Diameter: 41.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)
Our 6900 open bore adapter, also referred to as a drift, is used to press 6900 sealed bearings into hub shells or suspension components.
Installs: 6901 bearing
Outer Diameter: 21.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)
Our 6901 open bore adapter is used to press 24x12 sealed bearings. The adapter is machined with one step at 12mm OD, which fits in to the center of the sealed bearing.
Installs: 6901 bearing
Inner Step Outer Diameter: 11.9mm
Outer Diameter: 23.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)
Our 6902 open bore adapter is used to press 28x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 6902 bearing
Inner Step Outer Diameter: 14.9mm
Outer Diameter: 27.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)
Our 6903 open bore adapter is used to press 30x17 sealed bearings. The adapter is machined with one step at 17mm OD, which fits in to the center of the sealed bearing.
Installs: 6903 bearing
Inner Step Outer Diameter: 16.9mm
Outer Diameter: 29.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)
Our 6904 open bore adapter is used to press 37x20 sealed bearings. The adapter is machined with one step at 20mm OD, which fits in to the center of the sealed bearing.
Installs: 6904 bearing
Inner Step Outer Diameter: 19.9mm
Outer Diameter: 36.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)
Our GXP-LEFT open bore adapter is used to press 22x37 sealed bearings in to SRAM GXP bottom bracket cups and direct fit frames like TREK BB90. The adapter is machined with one step at 22mm OD, which fits in to the center of the sealed bearing.
Installs: 22X37 (GXP) bearing
Inner Step Outer Diameter: 22mm
Outer Diameter: 37mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
* Sold individually
Webshops and Bike shops
Related Products
-
Description
SRAM Predictive Steering Bearing Open Bore adapter, also referred to as a drift, is used to press sealed bearings in to SRAM Predictive Steering front hubs. The adapter is machined with a 37mm OD, and a machined step at 27.5mm that slips in to the center of the sealed bearing. Compatible with our PRESS-1 or PRESS-4 sealed bearing press to press in the bearing.
Installs: 27.5X37 bearing
Inner Step Outer Diameter: 27.3mm
Outer Diameter: 36.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations) -
Description
Our 6000 open bore adapter, also referred to as a drift, is used to press 6000 sealed bearings.
Installs: 6000 bearing
Outer Diameter: 21.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Thickness: 8mm
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations) -
Description
Our 6904 over axle adapter is used to press 6904 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6904 bearing
Outer Diameter: 37.8mm
Thickness: 7mm
Thru Hole Diameter: 20.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations) -
Description
The Double Ender brush is a flexible, stiff and double-pronged brush that'll leave your dirty bits gleaming.
It comes with a tough rubber handle and hard-wearing bristles for anything that’s filthy enough to need a proper scrubbing. It's built to be stiff enough to really take some welly but flexible enough to reach those tricky spots.
As with all things, go steady. Excessive rubbing or pressure won’t do any good and could lead to surface scratching. For really sensitive bits, we’d recommend a sponge or microfibre cloth.
- Removes dirt from hard to reach areas
- Adjustable prongs
- Hard wearing nylon bristles
- Tough impact resistant rubberized handle and impact zones
- Ideal for linkages, discs, shocks, pedals, chainstays, spokes etc -
Description
Individual extractor for removing 6001, 6801 & 6901 sealed bearings with 12mm inside diameter.
These bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.
All extractors are size specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor. If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt
