CHRIS KING HUB BEARINGS
CHRIS KING ISO MTB HUB BEARINGS
This bearing is designed for use only on Chris King second generation Front 15mmLD and 20mm hubs with a serial number that starts with 172.
Chris King Bearing Large Rear hubshell Right
Rear hub shell bearing, large, right side, fits all Chris King rear bike hubs Except R45
Chris King Bearing for Inner Driveshell ISO
Driveshell (freewheel body) bearing. Fits all Chris King rear bike hubs. ~29.9mm x 19.7mm No seal
Chris King Needle Bearing Classic/Disc
Chris King Needle Bearing BMX Driveshell "For use on the BMX Driveshell only"
This rear hubshell bearing ISO/ Classic (small, non-driveside) and Boost Centrelock Front hub bearings.
Chris King bearing PHB713:
- R45 Front Hubshell
- R45D C/L and BOOST C/L Hubshell Front and small non-driveside Rear
Chris King Rear R45 Small Rear Hub Bearing non-drive side
Chris King bearing PHB715:
- R45, R45D C/L and BOOST C/L Rear Hubshell Large Driveside bearing
Chris King R45 Bearing R DS
Chris King R45 Bearing Rear Driveshell inner Unsealed Shimano.
-campy inboard driveshell. same as outboard but without seal.
Chris King R45 CER Bearing Front
Chris King R45 CER Driveshell Inner Bearing
Chris King R45 CERAMIC Outer Driveshell Bearing
Chris King R45 CERAMIC Large Rear Hubshell Bearing
Chris King R45 Bearing Outer Drive Shell for XDR and Campy Sealed.
Chris King Bearing Front hub (1 only)
Bearing for FRONT Classic and ISO disc hubs. Not for use with R45 or front 20mm or 24mm hubs. 2 bearings are required, each sold separately
Webshops and Bike shops
Related Products
-
Description
The BlackBearing Ceramic Hydrid bearing is perfect to optimize performace with its low friction.
- Silicon nitride balls SI3N4
- Steel rings SAE52100 / stainless steel KS440 with optmized internal design
- Polyamide cage with low friction
- High quality ceramic grease -
Description
The BlackBearing B3 range is mostly the equivalent bearing factory spec'd on quality bikes.
- Chrome steelballs Abec 3
- Chrome steel rings SAE52100
- Chrome steel cage
- 2RS seals wet and dust resistance
- High quality grease -
Description
The BlackBearing B5 range is a high quality bearing upgrade to perform in the most extreme circumstances.
- Chrome steel balls SAE52100 abec 5
- Steel rings SAE52100 with optmized internal design
- Chrome steel cage
- Reinforced 2RS seals for better water and dust resistance.
- High quality grease -
Description
The BlackBearing B3 range is mostly the equivalent bearing factory spec'd on quality bikes.
- Chrome steelballs Abec 3
- Chrome steel rings SAE52100
- Chrome steel cage
- 2RS seals wet and dust resistance
- High quality greasePOA
