Chris King Ring Drive Lube 2.0 1.2oz
Description
RingDrive™ Lube 2.0 is a Nano-Particle lubricant engineered by Chris King to further reduce resistance and wear in your Chris King rear hub. In addition to lower resistance and a longer wear life RingDrive™ Lube 2.0 improves performance in cold weather conditions.
To install, simply remove old lubricant and contaminants from your RingDrive™, Drive, and Driven Rings and apply 1-2ml of RingDrive™ Lube 2.0. Only a 2.5mm hex key is required to perform the service.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:JLLU-0205
Juice Lubes Viking Juice 130ml bottle (Chain Lube)
A Tough-As-Nails Year-Round Lube For The Biggest Miles And Grimmest Trails
Designed to survive every crank of the Paris-Roubaix and crowned the “Holy Grail of Chain Lubes” by Singletrack Magazine. Viking is a tough-as-Odin’s-beard, year-round lube for use in All Conditions.
The best selling and longest lasting lube is built to pillage deep into your chain, conquering dust, rust and shady shifting. It will guarantee less workshop time, less rust, less missed shifts and a longer lasting chain.
Viking is tough and best applied well in advance of riding, the solvent based carrier dives deep into your chain before evaporating away to leave the lube deep in your rollers. The touch dry finish attracts minimal contaminants and shrugs of rain and mud.
Think of Viking as a dry lube but with the added protection of a wet lube.
It's light and runny like a fine honey mead, so go steady when applying it. If you're dribbling on the floor you've probably overdone it. Viking can be built up in layers for added or refreshed protection without becoming thick or claggy.
How To Use
Un-screw nozzle and pierce security seal. Re-attach nozzle and open flow valve a small amount to avoid over application.
For top performance, chain must be thoroughly degreased (Use Dirt Juice Super Gnarl for this!) Apply up to 4 layers of Viking Juice , allowing 2 minutes between each layer for the lube to penetrate and “set-up” correctly.
Size: 130ml$19.00 (RRP)Add To Cart
-
Stock Code:JLLU-0304
Juice Lubes Frame Juice Gleaming Frame Polish 400ml (Areosol)
Showroom Shine with a Very Pleasing Scent!
You know how annoying it is to look at your cleaned and gleaming wet bike and feel all proud of your hard work, only to turn round 5 minutes later when its dried off, to be confronted with the same cack stained bike that was there an hour ago, just minus the clods of mud? Well, be frustrated no more as Juice Lubes buffing marvellous Frame Juice will sort this little problem out in no time.
How To Use
After cleaning your frame with Dirt Juice and rinsing with fresh water, allow frame to dry. Then, spray directly on to the area you want shiny again (TAKE CARE TO AVOID CONTACT WITH ANY BRAKING SURFACES) Finally, buff with a clean rag to your level of satisfaction. It will also leave the surface slippery, making cleaning next time round that bit easier and quicker as well.
Size: 400ml$28.00 (RRP)Add To Cart
-
Stock Code:JLLU-0310
Juice Lubes JL69 400ml water disperent lubricant and protectant (Aerosol)
Displaces Moisture, Lubricates & Protects
Your crowbar-wielding mechanic in a can, with a biodegradable formula and super-accurate easy-spray nozzle.
JL69 is the absolute essential for driving moisture, rust and corrosion kicking and screaming out of your fancy bits before it’s too late. It’ll guarantee no more stuck threads or rusty bearings, bleeding knuckles or blowtorches.
Designed to penetrate deep into your components, it’s a must-have for general workshop jobs, a great apres-wash finishing touch and a quick fix for bikes that are put away wet.
Use it to displace water after a wash, to keep rust at bay and when things get stuck and you need a helping hand.
Our lubricating formula leaves a long lasting protective film that prevents dirt adhesion. JL69 isn't just for bikes, it works on just about anything including squeaky hinges and rusty locks.
Just don't apply it to braking surfaces, tyres or door knobs.
How to Use:
After cleaning your bike with Dirt Juice and rinsing with fresh water, Spray JL69 in to all nooks and crannies where moisture will sit and cause harm. Particular attention should be paid too rear mech, front mech, bottom bracket, suspension pivots and cables.
DO NOT SPRAY ON BRAKE PADS AND DISCS – lubrication here is not the name of the game!
In addition to bike maintenance, JL69 can be used in any situation where sitting water, corrosion and rust are undesirable.
Size: 400ml Aerosol$25.00 (RRP)Add To Cart
-
Stock Code:WTLU-LUBE-WT1-0_5OZ
WT-1 Chain Lube is a premium synthetic chain lubricant and a drivetrain treatment for all conditions in the same bottle. It cleans and protects chains while improving overall mechanical efficiency of a drivetrain. This allows cyclists to have just WT-1 Chain Lube on hand, instead of separate dry chain lube, wet chain lube, chain cleaner, and drivetrain treatment. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes because it binds so well with chains. As a drivetrain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away, then it will protect your chain in all riding conditions and allow you to ride longer between applications.
- Cleans, lubricates, and protects chains
- Peak performance in all conditions
- Optimal choice for complex modern drivetrains
- Easy to use. Quick to apply.
- Also works on other places of your bike, including hubs, cables, and pulley wheels
APPLICATION PROCESS
Ease of use is important in selecting a chain lubricant and chain treatment. The complete application process of WT-1 Chain Lube takes less than a minute and there is no need to clean your chain before getting started.
Here’s how to begin using WT-1 Chain Lube:
1. Shake bottle of WT-1 for 30 seconds. A ball bearing is present in every bottle to help mix things up.
2. Apply one drop to each roller of your chain. We recommend applying WT-1 Chain Lube to the top side of your chain between your derailleur and chainring, just in front of that lower pulley wheel.
3. Backpedal 20-30 times. This helps WT-1 Chain Lube find its way between all the pieces of your chain.
4. Wipe chain with microfiber cloth until it appears clean with a light sheen. It'll look extra dirty at first, then it will clear up as you wipe away that dirt.
5. Ride your bike. Reapply at least once every 650km
After your first couple applications, you’ll notice that your chain looks extra dirty following your first few rides. This means that WT-1 Chain Lube is working because that detergent-like additive has made its way into the gaps and crevices of your chain and is actively pushing out dirt, grease, and debris. You’ll want to wipe down your chain after those first few rides to remove chain contaminants. As you ride more and more, you’ll see WT-1 get into its stride and your chain will be clean, silent, and efficient.$13.39 (RRP)Add To Cart
-
Stock Code:JLLU-0202
Juice Lube Chain Juice Dry 100ml bottle (Chain Lube)
A High-Tech And Long-Lasting Chain Lube For Dry To Damp Conditions!
Chain Juice Dry guarantees crisp and silent shifts, no sticky gunk and tough-as-nails protection for your components.
Built with an Ethanol-based carrier that’s super effective at penetrating the depths of your chain, then evaporating to leave a dry and natural wax barrier. It’s reinforced with tough, long-lasting, synthetic additives that reduce noise and wear.
It’s also kind on the environment. Dry is designed to limit droplets from flicking when you’re spinning away and is fully biodegradable to break down quickly and harmlessly.
Ideal for MTB, road, gravel, commuter bikes or anything else in between. Best applied a little in advance of riding, dry can stand up to big miles on mixed terrain..
How to Use
Un-screw nozzle and pierce security seal. Re-attach nozzle and open flow valve a small amount to avoid over application.
For top performance, chain must be thoroughly degreased (Use Dirt Juice Super Gnarl for this!) Apply a couple of layers of Chain Juice Dry , allowing 2 minutes between each layer for the lube to penetrate and “set-up” correctly. Don’t expect to see a thick oily residue on the chain – Chain Juice Dry does not work like this !
Size: 100ml$19.00 (RRP)Add To Cart
