Problem Solvers Dble C/Ring Bolts Chromo
Description
Problem Solvers Double Chainring Bolts Silver Chromoly
Webshops and Bike shops
You may also be interested in...
-
Stock Code:SLCH-CR5821Stock Code:SLCH-CR5822Stock Code:SLCH-CR4628Stock Code:SLCH-CR4190Stock Code:SLCH-CR4191Stock Code:SLCH-CR4193Stock Code:SLCH-CR4194Stock Code:SLCH-CR4195Stock Code:SLCH-CR4196Stock Code:SLCH-CR4197Stock Code:SLCH-CR4198Stock Code:SLCH-CR0048Stock Code:SLCH-CR0050Stock Code:SLCH-CR0051Stock Code:SLCH-CR0060Stock Code:SLCH-CR0063Stock Code:SLCH-CR0064
Enter the Surly Stainless Steel chainring,you can now have an all-steel drivetrain that will love you long time. Stainless, as it’s name implies, is a rust and corrosion-resistant alloy steel that is known for it’s toughness.
- No ramps or shift gates
- use of Surly rings with 9 and 10 speed chains will have a tight fit and require a short break in period
- Chain Compatibility: 3/32"
- Material: 304 Stainless
- Ring Position: Middle , Outer , Single$71.50 (RRP)POAPOAPOAPOAPOAPOAPOAPOAPOAPOAPOAPOAPOAPOAPOAPOAPOA -
Stock Code:WTCHOVAL-ERC38-FTStock Code:WTCHOVAL-ERC40-FTStock Code:WTCHOVAL-ERC42-FT$172.01 (RRP)$172.01 (RRP)$172.01 (RRP)
-
Stock Code:WTCHOVAL-SH11040Stock Code:WTCHOVAL-SH11042Stock Code:WTCHOVAL-SH11044
- These rings are for use with Shimano 110 BCD Asymmetric 4-bolt cranks.
- Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703, and Tiagra 4700
- Sizes 40T and larger are compatible with Dura Ace 9100, Ultegra 8000, and 105 R7000 but a slight modification is required due to a change in the crank arm profile. The 38T chainring will not work for this modification. Click here to review the process for the modification, which takes about 5 minutes to perform.
- Mounts in the big ring position of the cranks but is offset inward for perfect chainline.
- The stock 2x bolts will not work. You will need our 6mm bolts which are optimized for single ring mounting.
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
- For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)
Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains.
If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
- Chainline - 47.5mm$158.62 (RRP)$158.62 (RRP)$167.89 (RRP) -
Stock Code:WTCHOVAL-RFC30Stock Code:WTCHOVAL-RFC30-BSTStock Code:WTCHOVAL-RFC30-BST-BStock Code:WTCHOVAL-RFC32-BSTStock Code:WTCHOVAL-RFC32-BST-BStock Code:WTCHOVAL-RFC34-BSTStock Code:WTCHOVAL-RFC34-BST-BStock Code:WTCHOVAL-RFC36-BST-BStock Code:WTCHOVAL-RFC36-BSTStock Code:WTCHOVAL-RFC40-BST
Elliptical Direct Mount Chainring for Race Face Cinch Standard / 6mm Offest (142mm)
Compatibility
- Any Race Face Cinch(TM) system crankset (including Next SL, Sixc, Turbine, Aeffect)
- For 142mm rear hub spacing
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability.
- For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)
Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.
If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
- Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!)
- Chainline 49mm (standard), 52mm (Boost)$158.62 (RRP)$158.62 (RRP)$170.00 (RRP)$158.62 (RRP)$170.00 (RRP)$170.00 (RRP)$170.00 (RRP)$180.00 (RRP)$154.50 (RRP)$162.74 (RRP) -
Stock Code:WTCH-SDM8-30Stock Code:WTCH-SDM8-32Stock Code:WTCH-SDM8-34Stock Code:WTCH-SDM8-36Stock Code:WTCH-SDM8-R-B-00F-36
Direct Mount Chainrings for SRAM 8-Bolt Mountain Cranks are optimized for the new SRAM Transmission mountain groupsets and T-Type chains. These are for folks who have the latest SRAM T-Type Transmission groupset that want a different chainring size beyond stock offering or upgrade to a Made In USA option with an optimized tooth profile for better performance.
The 3mm offset is for SRAM MTB cranks with DUB WIDE spindles that are already at the 55mm chainline required for SRAM T-Type Transmission groupsets.
Compatibility
- These direct mount chainrings will replace your existing chainring and spider or replace the direct mount chainring for SRAM AXS cranksets and other cranks that use the 8-bolt mounting. Most SRAM cranksets have traditionally used a 3-bolt mounting, but the 8 bolt mounting has always been used on the Quarq power meter cranks. Now some non-power meter cranks like SRAM AXS use the 8-bolt mounting.
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability
- 3mm offset
- Chainline 55mm$170.00 (RRP)$170.00 (RRP)$170.00 (RRP)$180.00 (RRP)$170.00 (RRP)
