Salsa Alternator Low Deck Rack 135-148
Description
The Alternator 135 Low Deck fits Salsa 135mm-spaced, non plus-sized tire, Alternator dropout equipped frames. It features a lower and narrower deck that fits over and around tires up to 2.4” (without fenders), as well as 700c and fender set ups.
NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points
NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts
Tubular 6061-T6 aluminum construction
135 x 345mm cupped deck
Extra-long struts for improved range of fit; straight and shaped (kinked) struts included
Black powder coat finish
Webshops and Bike shops
You may also be interested in...
-
Stock Code:SLRK-RK0102Stock Code:SLRK-RK0103
The rear Rack is also height-adjustable, enabling it to fit a wide variety wheel sizes while allowing you to move its center of gravity as low as possible for a more stable ride. Its wide platform has plenty of room for rack trunks, sleeping bags, tents, boxes of lima beans, or small cages full of hamsters. The stainless steel hardware we provide will enable you to fit them to most rigid 26" and 700c frames, and to forks equipped with drum, caliper, or cantilever brakes. Disc brakes and suspension are generally not compatible with our rear Racks, though there is an increasing number of frames designed to allow the use of racks and disc brakes.
Our rear rack will fit on a Pugsley/Moonlander, though it will sit slightly off-center due to the frame's offset design , and it sits a bit higher than normal since the mounts are part of the way up the seat stays rather than right at the dropouts like usual (this is to allow disc brake clearance). This is not something that will greatly affect the performance of the rack, but if you notice it try playing around with how you have your weight distributed on the rack until it feels "normal".
Rear rack WILL work with disc brakes on our Troll, Ogre, ECR, and Disc Trucker framePOAPOA -
Stock Code:SLRK-RK0105Stock Code:SLRK-RK0106
The Surly Front Rack is adjustable to fit from 26" to 29" wheels.
· Tubular CroMoly rack, stainless steel and aluminum hardware
· Adjustable to fit from 26" to 29" wheels
· Not compatible with 135mm spaced forks
· Includes hardware to retrofit to non-touring-specific forks
· Lower plates redesigned to add strength and increase clearance for disc calipers
· Repairable
Pugsley or Moonlander. While it is possible to make many racks work, all require some sort of modification. What kinds of modifications, you ask? Google "front racks on Moonlander/Pugsleys" and see what turns up.POAPOA -
Stock Code:SLRK-RK0109
We designed the Surly TV Tray to help riders boost the capacity of their current rack setups. Designed for easy pairing with nearly all Surly racks and most other racks on the market, mount this sturdy aluminum platform on top of your current rack to provide a footprint large enough for 30 lbs. of beef jerky, 9-volt batteries, used pinball parts, or whatever else you might need to haul. Available in dark black.
Load weight limit 30 lbs.
15 3/8" x 10"
Rack weight 650g
6061-TB Aluminum
Not compatible with Surly 24-Pack Rack or Wide Rear Disc Rack
Mounting Hardware Included$99.00 (RRP)POA -
Stock Code:SARK-RK1101
The Salsa EXP Series Anything Cage HD is a unique cargo mounting system that allows you to carry lightweight gear or large bottles on forks and down tubes that have Three-Pack mounts.
- Versatile system designed for the Salsa Anything Cage Bag with EXP Series Rubber Straps (included) or nylon EXP Series Anything Cradle Straps
- Constructed with glass-filled nylon for strength and durability
- Holds gear low on fork blades or down tubes with Three-Pack mounts
- Includes Anything Cage HD with hardware and two 20" Salsa EXP Rubber Straps
- Maximum load: 6.6 lb (3 kg)$90.00 (RRP)POA -
Stock Code:SMRK185710
Front mini rack with a host of braze-ons for your gadgets. This one has wider-set stays to fit gravel forks like the Enve Adventure series.
Extra long tang is bent for mounting to caliper brake bolt.
P-Clamps and other hardware included.
If installing to a braze-on, the braze-on need to be about 140mm from the brake hole on the crown. If your braze-on is too low, you will need to install using P-clamps on the legs.POA
