SURLY 26-29 CROMO REAR RACK
The rear Rack is also height-adjustable, enabling it to fit a wide variety wheel sizes while allowing you to move its center of gravity as low as possible for a more stable ride. Its wide platform has plenty of room for rack trunks, sleeping bags, tents, boxes of lima beans, or small cages full of hamsters. The stainless steel hardware we provide will enable you to fit them to most rigid 26" and 700c frames, and to forks equipped with drum, caliper, or cantilever brakes. Disc brakes and suspension are generally not compatible with our rear Racks, though there is an increasing number of frames designed to allow the use of racks and disc brakes.
Our rear rack will fit on a Pugsley/Moonlander, though it will sit slightly off-center due to the frame's offset design , and it sits a bit higher than normal since the mounts are part of the way up the seat stays rather than right at the dropouts like usual (this is to allow disc brake clearance). This is not something that will greatly affect the performance of the rack, but if you notice it try playing around with how you have your weight distributed on the rack until it feels "normal".
Rear rack WILL work with disc brakes on our Troll, Ogre, ECR, and Disc Trucker frame
Surly Racks are well-thought-out, durable, expedition-worthy racks that work with most panniers. While our racks aren’t limited solely to heavy duty touring, that is what they were designed for.
· Tubular CroMoly rack
· stainless steel hardware
· Height-adjustable to accommodate 26-29" wheels
· Compatible with Surly fat bikes
Tubing diameter: 10mm
Platform dimensions: 310 x 150mm
Weight: 1260g
Rear rack WILL work with disc brakes on our Troll, Ogre, ECR, and Disc Trucker frame
Webshops and Bike shops
Related Products
-
Description
The rear Rack is also height-adjustable, enabling it to fit a wide variety wheel sizes while allowing you to move its center of gravity as low as possible for a more stable ride. Its wide platform has plenty of room for rack trunks, sleeping bags, tents, boxes of lima beans, or small cages full of hamsters. The stainless steel hardware we provide will enable you to fit them to most rigid 26" and 700c frames, and to forks equipped with drum, caliper, or cantilever brakes. Disc brakes and suspension are generally not compatible with our rear Racks, though there is an increasing number of frames designed to allow the use of racks and disc brakes.
Our rear rack will fit on a Pugsley/Moonlander, though it will sit slightly off-center due to the frame's offset design , and it sits a bit higher than normal since the mounts are part of the way up the seat stays rather than right at the dropouts like usual (this is to allow disc brake clearance). This is not something that will greatly affect the performance of the rack, but if you notice it try playing around with how you have your weight distributed on the rack until it feels "normal".
Rear rack WILL work with disc brakes on our Troll, Ogre, ECR, and Disc Trucker framePOA -
Description
Surly Big Dummy Rails: Pair
- Works with cargo frames (including the Surly Big Dummy) built around Xtracycle's longtail standards
- Deck-attachment bosses stick up from the rails to create space between the deck and rails, providing windows to route tie-down straps and cordage
- Threaded bottle cage bosses located at the rear of each rail provide mounting locations for accessoriesPOA -
Description
Front mini rack with a host of braze-ons for your gadgets. This one has wider-set stays to fit gravel forks like the Enve Adventure series.
Extra long tang is bent for mounting to caliper brake bolt.
P-Clamps and other hardware included.
If installing to a braze-on, the braze-on need to be about 140mm from the brake hole on the crown. If your braze-on is too low, you will need to install using P-clamps on the legs.POA -
Description
Front mini rack with a host of braze-ons for your gadgets. This one has wider-set stays (130mm) to fit gravel forks like the Enve Adventure series.
Extra long tang is bent for mounting to caliper brake bolt on fork crown.
Hardware included.
Fits best on forks where the caliper brake hole on fork crown is 140mm above the fork leg eyelets. P-clamps included for steel forks that don't have eyelets. (P-clamps usually don't fit on tear drop shaped fork legs.) -
Description
* Rack is BLACK not Silver as pictured.
JACK is a universal-fit front bicycle rack that securely straps to almost any bike, offering a straightforward solution to carrying your things with you while you ride. A ‘Rack of all Trades’, JACK fits to your bike with a tool-free strap system, requiring no special bicycle frame or fork, no specialist equipment and no bike maintenance skills.
JACK’s frame is made from a single piece of cold formed 304 Stainless Steel rod. 304 Stainless is stronger and more durable than regular steel or aluminium. It's also rust resistant, so your JACK will go as long as you do!
Weight (including retention strap, 'M' load strap, material base and 31.8mm spacers): 700g
Height 230mm, Width 225mm, Length, 280mm
It’s officially rated for 5KG* however we know it is capable of much much more.
*Rating is given based on bike handling, not product failure testing.
