Surly Rack Rear Lower Kit
Description
Replacement Surly Bicycle Mounted Rack Parts
Webshops and Bike shops
You may also be interested in...
-
Stock Code:SLRK-RK0102Stock Code:SLRK-RK0103
The rear Rack is also height-adjustable, enabling it to fit a wide variety wheel sizes while allowing you to move its center of gravity as low as possible for a more stable ride. Its wide platform has plenty of room for rack trunks, sleeping bags, tents, boxes of lima beans, or small cages full of hamsters. The stainless steel hardware we provide will enable you to fit them to most rigid 26" and 700c frames, and to forks equipped with drum, caliper, or cantilever brakes. Disc brakes and suspension are generally not compatible with our rear Racks, though there is an increasing number of frames designed to allow the use of racks and disc brakes.
Our rear rack will fit on a Pugsley/Moonlander, though it will sit slightly off-center due to the frame's offset design , and it sits a bit higher than normal since the mounts are part of the way up the seat stays rather than right at the dropouts like usual (this is to allow disc brake clearance). This is not something that will greatly affect the performance of the rack, but if you notice it try playing around with how you have your weight distributed on the rack until it feels "normal".
Rear rack WILL work with disc brakes on our Troll, Ogre, ECR, and Disc Trucker framePOAPOA -
Stock Code:SLRK-RK0147
The Surly Rear Disc Rack is made of tubular CroMoly steel and is specifically designed to fit frames with seatstay-mounted disc brakes like the Straggler (650b and 700c), Krampus, and Karate Monkey.
- Tubular CroMoly rack, stainless-steel hardware
- Height-adjustable to accommodate 26-29" wheels
- Hardware housed in reusable Surly Tool Bag
- NOTE: The following "RK" part numbers will not be compatible with the new Rear Disc Racks: RK013, RK0121, RK0134
- Surly Rear Rack will haul up to 30kg (66 lb) of well-secured
- Platform dimensions: 350 x 150mm
- Weight: 1606g$270.00 (RRP)POA -
Stock Code:SLRK-RK0137
Surly Front Rack Upper Offset Sliding Mounting Plates for Lugged Forks
Sold as a pairPOA -
Stock Code:SMRK185711
Front mini rack with a host of braze-ons for your gadgets. This one has wider-set stays (130mm) to fit gravel forks like the Enve Adventure series.
Extra long tang is bent for mounting to caliper brake bolt on fork crown.
Hardware included.
Fits best on forks where the caliper brake hole on fork crown is 140mm above the fork leg eyelets. P-clamps included for steel forks that don't have eyelets. (P-clamps usually don't fit on tear drop shaped fork legs.)$210.00 (RRP)Add To Cart
-
Stock Code:SLRK-RK0118Stock Code:SLRK-RK0119
A traditional-style Porteur rack that mounts securely to mid-blade and crown eyelets of Surly forks, making it compatible with fat bike and 29+ wheels.
· Mounts to mid-blade and crown eyelet
· Mounting hardware is included
· Compatible with Surly forks that use crown mounted braze-ons and mid-blade fork eyelets
· Not? recommended for use with forks that have single mounting point in the fork crown
Disc Brake Compatible: Yes
Material: 4130 CroMoly Steel
Maximum Wheel Size (in) : 29+ ins
Platform Dimensions: 400mm x 270mm
Rack Mount Position: High
Tube Diameter: 10 mm mm
Weight: 860 g g
Weight Limit: 13.6kg
Compatible Surly forks: Requires crown and mid-blade eyelets. ECR, Troll, World Troller, Ogre, Long Haul Trucker, Disc Trucker, Cross-Check, Straggler, Travelers Check, Big Dummy, Ice Cream Truck, Wednesday, centered Pugsley/Moonlander. When installing on fat forks you may find the need to secure the rack stays to the interior vs exterior. Go with your gut friend. It speaks the truth.$320.00 (RRP)POAPOA
