- Home /
- Components /
- Bottom Bracket /
- Wheels MFG T47 OUT BB SRAM Black
Wheels MFG T47 OUT BB SRAM Black
Description
T47 threaded BB cups for T47 frames and 22/24mm spindle diameter SRAM GXP cranks. Cups have outboard bearings, and are typically used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle.
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.
Bottom Bracket Includes:
BB Cups with bearings
2 - Silicone dust seals
2 - 0.5mm crank spindle spacers
2 - 1.0mm crank spindle spacers
1 - 24mm ID wave washer
Drive Side Bearing: Enduro ABEC-3
Bottom Bracket/Frame Interface: T47
Bottom Bracket Shell Width (mm): 68mm - 100mm
Bottom Bracket Shell I.D.: 47x1.0mm Threaded
Crank Spindle Diameter: 22/24mm
Over Bearing Width: 91.2mm in 68mm wide shell*
Tool Pattern: 44mm x 16-notch
Webshops and Bike shops
You may also be interested in...
-
BB Shell Width (mm): 100 mm
BB/Frame Interface: English
Defined Color: Black
Spindle Interface Type: Surly OD , Shimano Hollowtech IIStock Level:1Stock Level:Out of StockStock Level:1POAPOA -
Stock Code:WMBB-BBRIGHT-OUT-30
Thread together bottom bracket for frames using the BBRight™ bottom bracket standard and BB386 30mm spindle diameter cranks. Two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.
Note: Spindle length must be equivalent to a BB386 length*
Bottom Bracket Includes:
BB Cups with bearings
2 - Silicone dust seals
2 - 0.5mm crank spindle spacers
2 - 1.0mm crank spindle spacers
Bearings: Enduro ABEC-3
Bottom Bracket/Frame Interface: BBRight™ Press Fit
Bottom Bracket Shell Width: 79mm
Bottom Bracket Shell I.D.: 46mm
Crank Spindle Diameter: 30mm
Tool Pattern: 48.5mm x 16 notch
Over Bearing Width: 91.5mm in 79mm wide shell*Stock Level:2Stock Level:2$216.00 (RRP)Add To Cart
-
Stock Code:WMBB-ITA-24MM
Italian threaded road bottom bracket for 70mm shells. We use only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable.
Includes:
(2) - Enduro Silicone dust seals
(1) - 2.5mm aluminum BB cup spacer
(2) - 0.5mm crank spindle spacers
(2) - 1.0mm crank spindle spacers
Direct replacement for Shimano HollowTech II bottom brackets!Stock Level:1Stock Level:1$184.00 (RRP)Add To Cart
-
Stock Code:BBBB-SPACER-24Stock Level:In StockStock Level:In Stock$11.81 (RRP)
Add To Cart
-
Stock Code:CKBB-ABB1Stock Code:CKBB-ABR1Stock Code:CKBB-ABS1Stock Code:CKBB-ABBYStock Code:CKBB-ABY1Stock Code:CKBB-ABM2Stock Code:CKBB-ABT2Stock Code:CKBB-ABP1Stock Code:CKBB-ABZ2
** FIT KIT REQUIRED FOR USE **
ThreadFit 30 comes with a Center Sleeve for 73mm BB shell. For 68mm shell - sleeve is required(included in Fit Kit #2 for DUB Road cranks).
ThreadFit 30 bottom bracket is silky smooth and long-lasting thanks to legendary, angular-contact bearings. They actually get faster over time as their contact surfaces wear, because they are build to ultra-tight aerospace tolerances, using machined, Delrin-spindle sleeves to create a perfect, and precise fit between cranks and frame. That’s where the low drag and butter smooth feel come from.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Legendary made-in-house bearings
- A Fit Kit is required for use
- Uses Chris King bottom bracket cup tool for installationStock Level:1Stock Level:Out of StockStock Level:Out of StockStock Level:Out of StockStock Level:1Stock Level:Out of StockStock Level:Out of StockStock Level:Out of StockStock Level:Out of StockStock Level:Out of StockExpected Date:06 May 2025Expected Date:06 May 2025Expected Date:06 May 2025Expected Date:06 May 2025$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$403.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)