CHRIS KING ISO REAR HUB PARTS
Chris King Rear 130mm Single Speed Axle bolt on
Chris King® Rear Thru-Axle - 135mm x 10mm
• Fits 135mm or 142mm Chris King ISO Rear Hubs (not compatible with 150mm, 157mm or Singlespeed Hubs).
• Allows you to run a 135x10mm Thru Axle on 135mm or 142mm Chris King ISO Hubs.
Chris King Rear Thru-Axle - 135mm x 12mm
• Fits 135mm or 142mm Chris King ISO Rear Hubs (not compatible with BOOST 148, 150mm, 157mm or Singlespeed Hubs).
• Allows you to run a 135x12mm Thru Axle on 135mm or 142mm Chris King ISO Hubs.
Chris King Rear 150 x 12mm Thru-Axle (2012 hubs or older)
Chris King 157x12mm Rear Thru-Axle Generation
Note: This Generation 2 157x12mm thru-axle is only compatible with 157x12mm and 150x12mm Hubs that were bought in 2013 or later. It will not fit 157x12mm hubs from 2012 or older
Chris King Adjusting Clamp Rear ISO Disc or Rear Single Speed Disc hub
If you need an adjusting clamp for a Chris King non-disc rear hub (Classic or Single Speed,) please see part number PHB702.
Chris King Adjusting Clamp Rear ISO Disc or Rear Single Speed Disc hub BLACK
If you need an adjusting clamp for a Chris King non-disc rear hub (Classic or Single Speed,) please see part number PHB702.
Chris King Rear 142x12mm Disc Hub Thru Axle End Cap - Drive Side
For Non-Drive Side use PHB575
Chris King R 135mm ISO Hub Axle End cap
This 140mm axle end is specified for Chris King® Rear Tandem hubs.
Select from side bar
Chris King Rear 135x10mm QR ISO Disc hub Axle (classic disc) 1 piece.
DOES NOT INCLUDE QR end caps or fun bolts. These must be purchased separately.
Use PHB705 if QR needed
Use PHB507 for Fun bolts
• Fits Chris King ISO Rear Hubs (not compatible with 150mm, 157mm, BOOST or Singlespeed Hubs).
• Replacement for 2-piece Axle and allows you to change any bolt on axle to a QR Axle.
Drive & Driven Ring SS pr
Drive Ring and Driven Ring for all Chris King hubs except R45. Driven Ring includes 0-ring.
Chris King Driveshell - Aluminum - With bearings included
This is the Aluminum drive shell that comes standard on Chris King Classic and ISO Disc hubs.
Chris King Aluminium driveshell to fit Classic and ISO hubs (NOT R45).
Bearings NOT included.
Parts to convert your existing Chris King ISO driveshell to XD.
For Chris King REAR Classic, ISO Disc, Single Speed, or BMX hubs only
Webshops and Bike shops
Related Products
-
Description
Wheels MFG Cone R082 9x1mm Sovos Front 1 Per (15x12.8mm)
•Fits: Sovos 9mm x 1, front hub
•Compatible with 9mm x 1 axle
•Diameter: 15.0mm
•Length: 12.8mm
•1 cone per bag -
Description
The Wolf Tooth Rear Axle does more than secure wheels
When developing the Rear Axle, Wolf Tooth engineers knew that they wouldn’t be able to get away with any old factory replacement part, even if it was made in Minnesota to aerospace standards. The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface, and prevents the axle from sticking or galling when you want to remove it.
These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing.
Check out the Axle Caps for added protection and the Trainer Caps for those days on the trainer. -
Description
Replacement pawls and springs for all 6Drive hubs (MT, FAT, RS, RO and RD).
-
Description
Wolf Tooth Front Axles are lightweight, easy to use, and friendly with your fork. They are available in a variety of colors and lengths for Standard, Boost, and Fat Bike forks. They use a captive steel washer under the head that protects your fork, transfers more of the tightening torque to clamping load for a stiffer interface, and prevents the axle from sticking or galling when you want to remove it. The new updated Wolf Tooth Front Axles now have an o-ring that makes them compatible with the Wolf Tooth Axle Handle Multi-Tool.
Compatibility
- RockShox 100 (standard) and 110 (Boost) suspension forks
- NOT compatible with RS-1 fork
- 2020 and newer SID Boost forks use the 100mm/Standard axle -
Description
Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.
Product features:
- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles
Tech Specs:
Material: 7075 aluminum
Hard anodized
Diameter: 12mm
Torque Spec: 12 Nm max
Tool Interface: 5mm hex key
