CHRIS KING ISO REAR HUB PARTS
Chris King Rear 130mm Single Speed Axle bolt on
Chris King® Rear Thru-Axle - 135mm x 10mm
• Fits 135mm or 142mm Chris King ISO Rear Hubs (not compatible with 150mm, 157mm or Singlespeed Hubs).
• Allows you to run a 135x10mm Thru Axle on 135mm or 142mm Chris King ISO Hubs.
Chris King Rear Thru-Axle - 135mm x 12mm
• Fits 135mm or 142mm Chris King ISO Rear Hubs (not compatible with BOOST 148, 150mm, 157mm or Singlespeed Hubs).
• Allows you to run a 135x12mm Thru Axle on 135mm or 142mm Chris King ISO Hubs.
Chris King Rear 150 x 12mm Thru-Axle (2012 hubs or older)
Chris King 157x12mm Rear Thru-Axle Generation
Note: This Generation 2 157x12mm thru-axle is only compatible with 157x12mm and 150x12mm Hubs that were bought in 2013 or later. It will not fit 157x12mm hubs from 2012 or older
Chris King Adjusting Clamp Rear ISO Disc or Rear Single Speed Disc hub
If you need an adjusting clamp for a Chris King non-disc rear hub (Classic or Single Speed,) please see part number PHB702.
Chris King Adjusting Clamp Rear ISO Disc or Rear Single Speed Disc hub BLACK
If you need an adjusting clamp for a Chris King non-disc rear hub (Classic or Single Speed,) please see part number PHB702.
Chris King Rear 142x12mm Disc Hub Thru Axle End Cap - Drive Side
For Non-Drive Side use PHB575
Chris King R 135mm ISO Hub Axle End cap
This 140mm axle end is specified for Chris King® Rear Tandem hubs.
Select from side bar
Chris King Rear 135x10mm QR ISO Disc hub Axle (classic disc) 1 piece.
DOES NOT INCLUDE QR end caps or fun bolts. These must be purchased separately.
Use PHB705 if QR needed
Use PHB507 for Fun bolts
• Fits Chris King ISO Rear Hubs (not compatible with 150mm, 157mm, BOOST or Singlespeed Hubs).
• Replacement for 2-piece Axle and allows you to change any bolt on axle to a QR Axle.
Drive & Driven Ring SS pr
Drive Ring and Driven Ring for all Chris King hubs except R45. Driven Ring includes 0-ring.
Chris King Driveshell - Aluminum - With bearings included
This is the Aluminum drive shell that comes standard on Chris King Classic and ISO Disc hubs.
Chris King Aluminium driveshell to fit Classic and ISO hubs (NOT R45).
Bearings NOT included.
Parts to convert your existing Chris King ISO driveshell to XD.
For Chris King REAR Classic, ISO Disc, Single Speed, or BMX hubs only
Webshops and Bike shops
Related Products
-
Description
Wheels MFG Axle-15 Front Quick Release 110x9.0x26 Campy Compatible
• Fits Campagnolo / Italian front hubs
• Thread Pitch: 9mm x 26
• Length: 110mm
• Hollow Axle
• 1 axle per bag
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. -
Description
Wheels MFG Axle-35 Rear Quick Release 174x10x1mm Shimano/Tandem
• Fits many tandem hubs
• Thread Pitch: 10mm x 1
• Length: 174mm
• Hollow Axle
• 1 axle per bag
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts -
Description
Fits:
-Bombtrack 2018 BEYOND+ 2
-Bombtrack 2018 BEYOND+ ADV
-Bombtrack 2019 BEYOND+ 2
-Bombtrack 2019 BEYOND + ADV
-Bombtrack 2020 CALE
-Bombtrack 2020 BEYOND+ ADVPOA -
Description
Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.
Product features:
- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles
Tech Specs:
- Material: 7075 aluminum
- Hard anodized
- Diameter: 12mm
- Torque Spec: 12 Nm max
- Tool Interface: 5mm hex key
- Made in the USA -
Description
173mm axle length, M12x1.5
Fits:
- Bombtrack HOOK 3 2016/17/18
- Bombtrack TENSION 3 2019
- Bombtrack TENSION C 2020
- Bombtrack HOOK 2 2017/18/19
- Bombtrack HOOK EXT 2017/18/19
- Bombtrack TEMPEST DISC 2017
- Bombtrack HOOK WMN 2018/19
- Bombtrack BEYOND 1 2018/19
- Bombtrack BEYOND XPD 2018
- Bombtrack BEYOND TEMPEST 2018/19
- Bombtrack TEMPEST WMN 2018/19
- Bombtrack AUDAX 2018/19
- Bombtrack HOOK ADV 2019
- Bombtrack HOOK EXT-C 2018/19
